From 74df828acc98dc2c637d30dcd21557f0026d5b25 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 28 Jul 2016 16:02:54 -0700 Subject: [PATCH 1/3] Show ADC values inline rather than after --- Marlin/Marlin_main.cpp | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 777d910163..63b69b55ef 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -4459,12 +4459,20 @@ inline void gcode_M104() { SERIAL_PROTOCOL_F(thermalManager.degHotend(target_extruder), 1); SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOL_F(thermalManager.degTargetHotend(target_extruder), 1); + #if ENABLED(SHOW_TEMP_ADC_VALUES) + SERIAL_PROTOCOLPAIR(" (", thermalManager.current_temperature_raw[target_extruder] / OVERSAMPLENR); + SERIAL_CHAR(')') + #endif #endif #if HAS_TEMP_BED SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOL_F(thermalManager.degBed(), 1); SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOL_F(thermalManager.degTargetBed(), 1); + #if ENABLED(SHOW_TEMP_ADC_VALUES) + SERIAL_PROTOCOLPAIR(" (", thermalManager.current_temperature_bed_raw / OVERSAMPLENR); + SERIAL_CHAR(')') + #endif #endif #if HOTENDS > 1 HOTEND_LOOP() { @@ -4473,6 +4481,10 @@ inline void gcode_M104() { SERIAL_PROTOCOL_F(thermalManager.degHotend(e), 1); SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOL_F(thermalManager.degTargetHotend(e), 1); + #if ENABLED(SHOW_TEMP_ADC_VALUES) + SERIAL_PROTOCOLPAIR(" (", thermalManager.current_temperature_raw[e] / OVERSAMPLENR); + SERIAL_CHAR(')') + #endif } #endif #if HAS_TEMP_BED @@ -4503,17 +4515,6 @@ inline void gcode_M104() { #endif } #endif - #if ENABLED(SHOW_TEMP_ADC_VALUES) - #if HAS_TEMP_BED - SERIAL_PROTOCOLPAIR(" ADC B:", thermalManager.current_temperature_bed_raw / OVERSAMPLENR); - #endif - HOTEND_LOOP() { - SERIAL_PROTOCOLPAIR(" T", e); - SERIAL_PROTOCOLCHAR(':'); - SERIAL_PROTOCOL(thermalManager.current_temperature_raw[e] / OVERSAMPLENR); - } - #endif - SERIAL_EOL; } #endif From e1970b4b287b9e69d6a90b9ab1f8784438e0ca0a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 28 Jul 2016 16:03:16 -0700 Subject: [PATCH 2/3] Show power output in same order as temp output --- Marlin/Marlin_main.cpp | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 63b69b55ef..9f7e78b1e2 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -4487,6 +4487,13 @@ inline void gcode_M104() { #endif } #endif + SERIAL_PROTOCOLPGM(" @:"); + #ifdef EXTRUDER_WATTS + SERIAL_PROTOCOL(((EXTRUDER_WATTS) * thermalManager.getHeaterPower(target_extruder)) / 127); + SERIAL_PROTOCOLCHAR('W'); + #else + SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder)); + #endif #if HAS_TEMP_BED SERIAL_PROTOCOLPGM(" B@:"); #ifdef BED_WATTS @@ -4496,13 +4503,6 @@ inline void gcode_M104() { SERIAL_PROTOCOL(thermalManager.getHeaterPower(-1)); #endif #endif - SERIAL_PROTOCOLPGM(" @:"); - #ifdef EXTRUDER_WATTS - SERIAL_PROTOCOL(((EXTRUDER_WATTS) * thermalManager.getHeaterPower(target_extruder)) / 127); - SERIAL_PROTOCOLCHAR('W'); - #else - SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder)); - #endif #if HOTENDS > 1 HOTEND_LOOP() { SERIAL_PROTOCOLPAIR(" @", e); From c31f56a38c0091873eb13cf8c6e1d6e4a4b84fa7 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 29 Jul 2016 15:14:13 -0700 Subject: [PATCH 3/3] Deprecate EXTRUDER_WATTS and BED_WATTS --- Marlin/Configuration.h | 4 ---- Marlin/Marlin_main.cpp | 21 +++---------------- Marlin/SanityCheck.h | 4 ++-- .../Cartesio/Configuration.h | 4 ---- .../Felix/Configuration.h | 4 ---- .../Felix/DUAL/Configuration.h | 4 ---- .../Hephestos/Configuration.h | 4 ---- .../Hephestos_2/Configuration.h | 4 ---- .../K8200/Configuration.h | 4 ---- .../K8400/Configuration.h | 4 ---- .../K8400/Dual-head/Configuration.h | 4 ---- .../RepRapWorld/Megatronics/Configuration.h | 4 ---- .../RigidBot/Configuration.h | 4 ---- .../SCARA/Configuration.h | 4 ---- .../TAZ4/Configuration.h | 4 ---- .../WITBOX/Configuration.h | 4 ---- .../adafruit/ST7565/Configuration.h | 4 ---- .../delta/biv2.5/Configuration.h | 4 ---- .../delta/generic/Configuration.h | 4 ---- .../delta/kossel_mini/Configuration.h | 4 ---- .../delta/kossel_pro/Configuration.h | 4 ---- .../delta/kossel_xl/Configuration.h | 4 ---- .../makibox/Configuration.h | 4 ---- .../tvrrug/Round2/Configuration.h | 4 ---- 24 files changed, 5 insertions(+), 108 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index b8ebd20833..7f0904d2e6 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -263,10 +263,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 9f7e78b1e2..a47b446c3b 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -4488,31 +4488,16 @@ inline void gcode_M104() { } #endif SERIAL_PROTOCOLPGM(" @:"); - #ifdef EXTRUDER_WATTS - SERIAL_PROTOCOL(((EXTRUDER_WATTS) * thermalManager.getHeaterPower(target_extruder)) / 127); - SERIAL_PROTOCOLCHAR('W'); - #else - SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder)); - #endif + SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder)); #if HAS_TEMP_BED SERIAL_PROTOCOLPGM(" B@:"); - #ifdef BED_WATTS - SERIAL_PROTOCOL(((BED_WATTS) * thermalManager.getHeaterPower(-1)) / 127); - SERIAL_PROTOCOLCHAR('W'); - #else - SERIAL_PROTOCOL(thermalManager.getHeaterPower(-1)); - #endif + SERIAL_PROTOCOL(thermalManager.getHeaterPower(-1)); #endif #if HOTENDS > 1 HOTEND_LOOP() { SERIAL_PROTOCOLPAIR(" @", e); SERIAL_PROTOCOLCHAR(':'); - #ifdef EXTRUDER_WATTS - SERIAL_PROTOCOL(((EXTRUDER_WATTS) * thermalManager.getHeaterPower(e)) / 127); - SERIAL_PROTOCOLCHAR('W'); - #else - SERIAL_PROTOCOL(thermalManager.getHeaterPower(e)); - #endif + SERIAL_PROTOCOL(thermalManager.getHeaterPower(e)); } #endif } diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 12e5e9b345..2cbdcc5494 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -698,8 +698,8 @@ #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." #elif defined(PID_PARAMS_PER_EXTRUDER) #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." -#elif defined(EXTRUDER_WATTS) - #error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead." +#elif defined(EXTRUDER_WATTS) || defined(BED_WATTS) + #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration." #elif defined(SERVO_ENDSTOP_ANGLES) #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 7892e4e43e..4f77d4bb25 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -265,10 +265,6 @@ #define HEATER_3_MAXTEMP 415 #define BED_MAXTEMP 165 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index b0e218b5d0..4be4e79501 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 30ea847f45..7399f98fdc 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index a578621c80..8dc9522fdc 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -267,10 +267,6 @@ #define HEATER_3_MAXTEMP 260 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 6586758cab..bed48247b9 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -263,10 +263,6 @@ //#define HEATER_3_MAXTEMP 275 //#define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 9608baed40..49057aea05 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -271,10 +271,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 5a431599c5..f53441c748 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index cf3cb68d70..3b76fbda12 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 5f7ce95eec..2dc3555c61 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index ed919e87fb..571e3aa168 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -267,10 +267,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 3ee07c3a9c..b6c70ee743 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -289,10 +289,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -#define HOTEND_WATTS (2*2/5.9) // P=U^2/R -#define BED_WATTS (5.45*5.45/2.2) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index bf7c10f3bd..54f69f5467 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 250 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 0f81183e3e..67fc743a99 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -266,10 +266,6 @@ #define HEATER_3_MAXTEMP 260 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index fd4441f842..80b0715a7e 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 35ec25acbd..79079193ff 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 1632511689..e3232022e1 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index f5283d99a3..873f3c6aa6 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 65e68a4b51..f6a09cac22 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -270,10 +270,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 9aac30d6be..d3b4bb0d14 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -257,10 +257,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index ad2997dda7..9f9d940650 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -264,10 +264,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //=========================================================================== diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index dbe5b9cd2b..a36fb37f02 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -263,10 +263,6 @@ #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS -//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R -//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R - //=========================================================================== //============================= PID Settings ================================ //===========================================================================