MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

📝 Format some comments

Browse Source
This commit is contained in:
Scott Lahteine 2022-09-03 18:21:23 -05:00
parent 033bca1773
commit dc65e299fa
1 changed files with 12 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/Configuration_adv.h
View File

@ -481,18 +481,22 @@
// before a min_temp_error is triggered. (Shouldn't be more than 10.) // before a min_temp_error is triggered. (Shouldn't be more than 10.)
//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 //#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
// The number of milliseconds a hotend will preheat before starting to check /**
// the temperature. This value should NOT be set to the time it takes the * The number of milliseconds a hotend will preheat before starting to check
// hot end to reach the target temperature, but the time it takes to reach * the temperature. This value should NOT be set to the time it takes the
// the minimum temperature your thermistor can read. The lower the better/safer. * hot end to reach the target temperature, but the time it takes to reach
// This shouldn't need to be more than 30 seconds (30000) * the minimum temperature your thermistor can read. The lower the better/safer.
* This shouldn't need to be more than 30 seconds (30000)
*/
//#define MILLISECONDS_PREHEAT_TIME 0 //#define MILLISECONDS_PREHEAT_TIME 0
// @section extruder // @section extruder
// Extruder runout prevention. /**
// If the machine is idle and the temperature over MINTEMP * Extruder runout prevention.
// then extrude some filament every couple of SECONDS. * If the machine is idle and the temperature over MINTEMP
* then extrude some filament every couple of SECONDS.
*/
//#define EXTRUDER_RUNOUT_PREVENT //#define EXTRUDER_RUNOUT_PREVENT
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190