Simulator HAL and build targets (#22418)

This commit is contained in:
Chris Pepper 2021-07-22 01:01:23 +01:00 committed by Scott Lahteine
parent e0fa6ed4f8
commit dc67705049
37 changed files with 1847 additions and 16 deletions

6
.gitignore vendored
View File

@ -143,7 +143,11 @@ vc-fileutils.settings
.vscode/launch.json
.vscode/*.db
# cmake
#Simulation
imgui.ini
eeprom.dat
#cmake
CMakeLists.txt
src/CMakeLists.txt
CMakeListsPrivate.txt

View File

@ -0,0 +1,217 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define CPU_32_BIT
#define HAL_IDLETASK
void HAL_idletask();
#define F_CPU 100000000
#define SystemCoreClock F_CPU
#include <stdint.h>
#include <stdarg.h>
#undef min
#undef max
#include <algorithm>
#include "pinmapping.h"
void _printf (const char *format, ...);
void _putc(uint8_t c);
uint8_t _getc();
//extern "C" volatile uint32_t _millis;
//arduino: Print.h
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
//arduino: binary.h (weird defines)
#define B01 1
#define B10 2
#include "../shared/Marduino.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include "serial.h"
#define SHARED_SERVOS HAS_SERVOS
extern MSerialT serial_stream_0;
extern MSerialT serial_stream_1;
extern MSerialT serial_stream_2;
extern MSerialT serial_stream_3;
#define _MSERIAL(X) serial_stream_##X
#define MSERIAL(X) _MSERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from 0 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from 0 to 3. Please update your configuration."
#endif
#endif
#ifdef MMU2_SERIAL_PORT
#if WITHIN(MMU2_SERIAL_PORT, 0, 3)
#define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
#else
#error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration."
#endif
#endif
#ifdef LCD_SERIAL_PORT
#if WITHIN(LCD_SERIAL_PORT, 0, 3)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "LCD_SERIAL_PORT must be from 0 to 3. Please update your configuration."
#endif
#endif
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
#define ST7920_DELAY_3 DELAY_NS(750)
//
// Interrupts
//
#define CRITICAL_SECTION_START()
#define CRITICAL_SECTION_END()
#define ISRS_ENABLED()
#define ENABLE_ISRS()
#define DISABLE_ISRS()
inline void HAL_init() {}
// Utility functions
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
int freeMemory();
#pragma GCC diagnostic pop
// ADC
#define HAL_ADC_VREF 5.0
#define HAL_ADC_RESOLUTION 10
#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch)
#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
void HAL_adc_init();
void HAL_adc_enable_channel(const uint8_t ch);
void HAL_adc_start_conversion(const uint8_t ch);
uint16_t HAL_adc_get_result();
// Reset source
inline void HAL_clear_reset_source(void) {}
inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }
/* ---------------- Delay in cycles */
#define DELAY_CYCLES(x) Kernel::delayCycles(x)
#define SYSTEM_YIELD() Kernel::yield()
// Maple Compatibility
typedef void (*systickCallback_t)(void);
void systick_attach_callback(systickCallback_t cb);
extern volatile uint32_t systick_uptime_millis;
// Marlin uses strstr in constexpr context, this is not supported, workaround by defining constexpr versions of the required functions.
#define strstr(a, b) strstr_constexpr((a), (b))
constexpr inline std::size_t strlen_constexpr(const char* str) {
// https://github.com/gcc-mirror/gcc/blob/5c7634a0e5f202935aa6c11b6ea953b8bf80a00a/libstdc%2B%2B-v3/include/bits/char_traits.h#L329
if (str != nullptr) {
std::size_t i = 0;
while (str[i] != '\0') {
++i;
}
return i;
}
return 0;
}
constexpr inline int strncmp_constexpr(const char* lhs, const char* rhs, std::size_t count) {
// https://github.com/gcc-mirror/gcc/blob/13b9cbfc32fe3ac4c81c4dd9c42d141c8fb95db4/libstdc%2B%2B-v3/include/bits/char_traits.h#L655
if (lhs == nullptr || rhs == nullptr) {
return rhs != nullptr ? -1 : 1;
}
for (std::size_t i = 0; i < count; ++i) {
if (lhs[i] != rhs[i]) {
return lhs[i] < rhs[i] ? -1 : 1;
} else if (lhs[i] == '\0') {
return 0;
}
}
return 0;
}
constexpr inline const char* strstr_constexpr(const char* str, const char* target) {
// https://github.com/freebsd/freebsd/blob/master/sys/libkern/strstr.c
if (char c = target != nullptr ? *target++ : '\0'; c != '\0' && str != nullptr) {
std::size_t len = strlen_constexpr(target);
do {
char sc = {};
do {
if ((sc = *str++) == '\0') {
return nullptr;
}
} while (sc != c);
} while (strncmp_constexpr(str, target, len) != 0);
--str;
}
return str;
}
constexpr inline char* strstr_constexpr(char* str, const char* target) {
// https://github.com/freebsd/freebsd/blob/master/sys/libkern/strstr.c
if (char c = target != nullptr ? *target++ : '\0'; c != '\0' && str != nullptr) {
std::size_t len = strlen_constexpr(target);
do {
char sc = {};
do {
if ((sc = *str++) == '\0') {
return nullptr;
}
} while (sc != c);
} while (strncmp_constexpr(str, target, len) != 0);
--str;
}
return str;
}

View File

@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <SPI.h>
using MarlinSPI = SPIClass;

View File

@ -0,0 +1,111 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast I/O Routines for X86_64
*/
#include "../shared/Marduino.h"
#include <pinmapping.h>
#define SET_DIR_INPUT(IO) Gpio::setDir(IO, 1)
#define SET_DIR_OUTPUT(IO) Gpio::setDir(IO, 0)
#define SET_MODE(IO, mode) Gpio::setMode(IO, mode)
#define WRITE_PIN_SET(IO) Gpio::set(IO)
#define WRITE_PIN_CLR(IO) Gpio::clear(IO)
#define READ_PIN(IO) Gpio::get(IO)
#define WRITE_PIN(IO,V) Gpio::set(IO, V)
/**
* Magic I/O routines
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
/// Read a pin
#define _READ(IO) READ_PIN(IO)
/// Write to a pin
#define _WRITE(IO,V) WRITE_PIN(IO,V)
/// toggle a pin
#define _TOGGLE(IO) _WRITE(IO, !READ(IO))
/// set pin as input
#define _SET_INPUT(IO) SET_DIR_INPUT(IO)
/// set pin as output
#define _SET_OUTPUT(IO) SET_DIR_OUTPUT(IO)
/// set pin as input with pullup mode
#define _PULLUP(IO,V) pinMode(IO, (V) ? INPUT_PULLUP : INPUT)
/// set pin as input with pulldown mode
#define _PULLDOWN(IO,V) pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT)
// hg42: all pins can be input or output (I hope)
// hg42: undefined pins create compile error (IO, is no pin)
// hg42: currently not used, but was used by pinsDebug
/// check if pin is an input
#define _IS_INPUT(IO) (IO >= 0)
/// check if pin is an output
#define _IS_OUTPUT(IO) (IO >= 0)
/// Read a pin wrapper
#define READ(IO) _READ(IO)
/// Write to a pin wrapper
#define WRITE(IO,V) _WRITE(IO,V)
/// toggle a pin wrapper
#define TOGGLE(IO) _TOGGLE(IO)
/// set pin as input wrapper
#define SET_INPUT(IO) _SET_INPUT(IO)
/// set pin as input with pullup wrapper
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
/// set pin as input with pulldown wrapper
#define SET_INPUT_PULLDOWN(IO) do{ _SET_INPUT(IO); _PULLDOWN(IO, HIGH); }while(0)
/// set pin as output wrapper - reads the pin and sets the output to that value
#define SET_OUTPUT(IO) do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0)
// set pin as PWM
#define SET_PWM(IO) SET_OUTPUT(IO)
/// check if pin is an input wrapper
#define IS_INPUT(IO) _IS_INPUT(IO)
/// check if pin is an output wrapper
#define IS_OUTPUT(IO) _IS_OUTPUT(IO)
// Shorthand
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,31 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
// Add strcmp_P if missing
#ifndef strcmp_P
#define strcmp_P(a, b) strcmp((a), (b))
#endif
#ifndef strcat_P
#define strcat_P(dest, src) strcat((dest), (src))
#endif

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,43 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Test X86_64-specific configuration values for errors at compile-time.
*/
// Emulating RAMPS
#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
#error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
#endif
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on LINUX."
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on LINUX."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on LINUX."
#endif

View File

@ -0,0 +1,59 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Support routines for X86_64
*/
/**
* Translation of routines & variables used by pinsDebug.h
*/
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#define pwm_details(pin) pin = pin // do nothing // print PWM details
#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin.
#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
#define digitalRead_mod(p) digitalRead(p)
#define PRINT_PORT(p)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
// active ADC function/mode/code values for PINSEL registers
constexpr int8_t ADC_pin_mode(pin_t pin) {
return (-1);
}
int8_t get_pin_mode(pin_t pin) {
if (!VALID_PIN(pin)) return -1;
return 0;
}
bool GET_PINMODE(pin_t pin) {
int8_t pin_mode = get_pin_mode(pin);
if (pin_mode == -1 || pin_mode == ADC_pin_mode(pin)) // found an invalid pin or active analog pin
return false;
return (Gpio::getMode(pin) != 0); //input/output state
}
bool GET_ARRAY_IS_DIGITAL(pin_t pin) {
return (!IS_ANALOG(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
}

View File

@ -0,0 +1,80 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
* Based on "servo.h - Interrupt driven Servo library for Arduino using 16 bit timers -
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
*
*/
#include <stdint.h>
// Macros
//values in microseconds
#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo
#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo
#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached
#define REFRESH_INTERVAL 20000 // minimum time to refresh servos in microseconds
#define MAX_SERVOS 4
#define INVALID_SERVO 255 // flag indicating an invalid servo index
// Types
typedef struct {
uint8_t nbr : 8 ; // a pin number from 0 to 254 (255 signals invalid pin)
uint8_t isActive : 1 ; // true if this channel is enabled, pin not pulsed if false
} ServoPin_t;
typedef struct {
ServoPin_t Pin;
unsigned int pulse_width; // pulse width in microseconds
} ServoInfo_t;
// Global variables
extern uint8_t ServoCount;
extern ServoInfo_t servo_info[MAX_SERVOS];

View File

@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h"
#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use
// spiBeginTransaction.
#endif
// Onboard SD
//#define SD_SCK_PIN P0_07
//#define SD_MISO_PIN P0_08
//#define SD_MOSI_PIN P0_09
//#define SD_SS_PIN P0_06
// External SD
#ifndef SD_SCK_PIN
#define SD_SCK_PIN 50
#endif
#ifndef SD_MISO_PIN
#define SD_MISO_PIN 51
#endif
#ifndef SD_MOSI_PIN
#define SD_MOSI_PIN 52
#endif
#ifndef SD_SS_PIN
#define SD_SS_PIN 53
#endif
#ifndef SDSS
#define SDSS SD_SS_PIN
#endif

View File

@ -0,0 +1,64 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
#ifndef LCD_READ_ID4
#define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341)
#endif
#define DATASIZE_8BIT 8
#define DATASIZE_16BIT 16
#define TFT_IO_DRIVER TFT_SPI
#define DMA_MINC_ENABLE 1
#define DMA_MINC_DISABLE 0
class TFT_SPI {
private:
static uint32_t ReadID(uint16_t Reg);
static void Transmit(uint16_t Data);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
// static SPIClass SPIx;
static void Init();
static uint32_t GetID();
static bool isBusy();
static void Abort();
static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT);
static void DataTransferEnd();
static void DataTransferAbort();
static void WriteData(uint16_t Data);
static void WriteReg(uint16_t Reg);
static void WriteSequence(uint16_t *Data, uint16_t Count);
// static void WriteMultiple(uint16_t Color, uint16_t Count);
static void WriteMultiple(uint16_t Color, uint32_t Count);
};

View File

@ -0,0 +1,80 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
#include <SPI.h>
#endif
#ifndef TOUCH_MISO_PIN
#define TOUCH_MISO_PIN SD_MISO_PIN
#endif
#ifndef TOUCH_MOSI_PIN
#define TOUCH_MOSI_PIN SD_MOSI_PIN
#endif
#ifndef TOUCH_SCK_PIN
#define TOUCH_SCK_PIN SD_SCK_PIN
#endif
#ifndef TOUCH_CS_PIN
#define TOUCH_CS_PIN SD_SS_PIN
#endif
#ifndef TOUCH_INT_PIN
#define TOUCH_INT_PIN -1
#endif
#define XPT2046_DFR_MODE 0x00
#define XPT2046_SER_MODE 0x04
#define XPT2046_CONTROL 0x80
enum XPTCoordinate : uint8_t {
XPT2046_X = 0x10 | XPT2046_CONTROL | XPT2046_DFR_MODE,
XPT2046_Y = 0x50 | XPT2046_CONTROL | XPT2046_DFR_MODE,
XPT2046_Z1 = 0x30 | XPT2046_CONTROL | XPT2046_DFR_MODE,
XPT2046_Z2 = 0x40 | XPT2046_CONTROL | XPT2046_DFR_MODE,
};
#if !defined(XPT2046_Z1_THRESHOLD)
#define XPT2046_Z1_THRESHOLD 10
#endif
class XPT2046 {
private:
static bool isBusy() { return false; }
static uint16_t getRawData(const XPTCoordinate coordinate);
static bool isTouched();
static inline void DataTransferBegin();
static inline void DataTransferEnd();
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
static uint16_t HardwareIO(uint16_t data);
#endif
static uint16_t SoftwareIO(uint16_t data);
static uint16_t IO(uint16_t data = 0);
public:
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
static SPIClass SPIx;
#endif
static void Init();
static bool getRawPoint(int16_t *x, int16_t *y);
};

View File

@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* HAL timers for Linux X86_64
*/
#include <stdint.h>
// ------------------------
// Defines
// ------------------------
#define FORCE_INLINE __attribute__((always_inline)) inline
typedef uint64_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFF
#define HAL_TIMER_RATE ((SystemCoreClock) / 4) // frequency of timers peripherals
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#ifndef SYSTICK_TIMER_NUM
#define SYSTICK_TIMER_NUM 2 // Timer Index for Systick
#endif
#define SYSTICK_TIMER_FREQUENCY 1000
#define TEMP_TIMER_RATE 1000000
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
#define STEPPER_TIMER_RATE HAL_TIMER_RATE // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
#define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US)
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void TIMER0_IRQHandler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void TIMER1_IRQHandler()
#endif
void HAL_timer_init();
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare);
hal_timer_t HAL_timer_get_compare(const uint8_t timer_num);
hal_timer_t HAL_timer_get_count(const uint8_t timer_num);
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)

View File

@ -0,0 +1,52 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
// adapted from I2C/master/master.c example
// https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
#ifdef __PLAT_NATIVE_SIM__
#include <cstdint>
#ifdef __cplusplus
extern "C" {
#endif
uint8_t u8g_i2c_start(const uint8_t sla) {
return 1;
}
void u8g_i2c_init(const uint8_t clock_option) {
}
uint8_t u8g_i2c_send_byte(uint8_t data) {
return 1;
}
void u8g_i2c_stop() {
}
#ifdef __cplusplus
}
#endif
#endif // __PLAT_NATIVE_SIM__

View File

@ -0,0 +1,37 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
void u8g_i2c_init(const uint8_t clock_options);
//uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos);
uint8_t u8g_i2c_start(uint8_t sla);
uint8_t u8g_i2c_send_byte(uint8_t data);
void u8g_i2c_stop();
#ifdef __cplusplus
}
#endif

View File

@ -0,0 +1,44 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
void usleep(uint64_t microsec);
// The following are optional depending on the platform.
// definitions of HAL specific com and device drivers.
uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
// connect U8g com generic com names to the desired driver
#define U8G_COM_SW_SPI u8g_com_sw_spi_fn
#define U8G_COM_ST7920_SW_SPI u8g_com_ST7920_sw_spi_fn
// let these default for now
#define U8G_COM_HW_SPI u8g_com_null_fn
#define U8G_COM_ST7920_HW_SPI u8g_com_null_fn
#define U8G_COM_SSD_I2C u8g_com_null_fn
#define U8G_COM_PARALLEL u8g_com_null_fn
#define U8G_COM_T6963 u8g_com_null_fn
#define U8G_COM_FAST_PARALLEL u8g_com_null_fn
#define U8G_COM_UC_I2C u8g_com_null_fn

View File

@ -0,0 +1,43 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* LCD delay routines - used by all the drivers.
*
* These are based on the LPC1768 routines.
*
* Couldn't just call exact copies because the overhead
* results in a one microsecond delay taking about 4µS.
*/
#ifdef __cplusplus
extern "C" {
#endif
void U8g_delay(int msec);
void u8g_MicroDelay();
void u8g_10MicroDelay();
#ifdef __cplusplus
}
#endif

View File

@ -0,0 +1,52 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Low level pin manipulation routines - used by all the drivers.
*
* These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
*
* Couldn't just call exact copies because the overhead killed the LCD update speed
* With an intermediate level the softspi was running in the 10-20kHz range which
* resulted in using about about 25% of the CPU's time.
*/
#ifdef __PLAT_NATIVE_SIM__
#include "../fastio.h"
#include "LCD_pin_routines.h"
#ifdef __cplusplus
extern "C" {
#endif
void u8g_SetPinOutput(uint8_t internal_pin_number){SET_DIR_OUTPUT(internal_pin_number);}
void u8g_SetPinInput(uint8_t internal_pin_number){SET_DIR_INPUT(internal_pin_number);}
void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status){WRITE_PIN(pin, pin_status);}
uint8_t u8g_GetPinLevel(uint8_t pin){return READ_PIN(pin);}
void usleep(uint64_t microsec){
assert(false); // why we here?
}
#ifdef __cplusplus
}
#endif
#endif // __PLAT_NATIVE_SIM__

View File

@ -0,0 +1,46 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Low level pin manipulation routines - used by all the drivers.
*
* These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
*
* Couldn't just call exact copies because the overhead killed the LCD update speed
* With an intermediate level the softspi was running in the 10-20kHz range which
* resulted in using about about 25% of the CPU's time.
*/
#ifdef __cplusplus
extern "C" {
#endif
void u8g_SetPinOutput(uint8_t internal_pin_number);
void u8g_SetPinInput(uint8_t internal_pin_number);
void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status);
uint8_t u8g_GetPinLevel(uint8_t pin);
#ifdef __cplusplus
}
#endif

View File

@ -0,0 +1,171 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_st7920_hw_spi.c
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2011, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef __PLAT_NATIVE_SIM__
#include "../../../inc/MarlinConfig.h"
#if ENABLED(U8GLIB_ST7920)
#include <U8glib.h>
#include "../../shared/Delay.h"
#undef SPI_SPEED
#define SPI_SPEED 6
#define SPI_DELAY_CYCLES (1 + SPI_SPEED * 10)
static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
static uint8_t SPI_speed = 0;
static uint8_t swSpiTransfer(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin) {
for (uint8_t i = 0; i < 8; i++) {
WRITE_PIN(mosi_pin, !!(b & 0x80));
DELAY_CYCLES(SPI_SPEED);
WRITE_PIN(sck_pin, HIGH);
DELAY_CYCLES(SPI_SPEED);
b <<= 1;
if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1;
WRITE_PIN(sck_pin, LOW);
DELAY_CYCLES(SPI_SPEED);
}
return b;
}
static uint8_t swSpiInit(const uint8_t spiRate, const pin_t sck_pin, const pin_t mosi_pin) {
WRITE_PIN(mosi_pin, HIGH);
WRITE_PIN(sck_pin, LOW);
return spiRate;
}
static void u8g_com_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
static uint8_t rs_last_state = 255;
if (rs != rs_last_state) {
// Transfer Data (FA) or Command (F8)
swSpiTransfer(rs ? 0x0FA : 0x0F8, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
rs_last_state = rs;
DELAY_US(40); // Give the controller time to process the data: 20 is bad, 30 is OK, 40 is safe
}
swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
}
#ifdef __cplusplus
extern "C" {
#endif
uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch (msg) {
case U8G_COM_MSG_INIT:
SCK_pin_ST7920_HAL = u8g->pin_list[U8G_PI_SCK];
MOSI_pin_ST7920_HAL_HAL = u8g->pin_list[U8G_PI_MOSI];
u8g_SetPIOutput(u8g, U8G_PI_CS);
u8g_SetPIOutput(u8g, U8G_PI_SCK);
u8g_SetPIOutput(u8g, U8G_PI_MOSI);
u8g_Delay(5);
SPI_speed = swSpiInit(SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL);
u8g_SetPILevel(u8g, U8G_PI_CS, 0);
u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: command mode */
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
break;
case U8G_COM_MSG_CHIP_SELECT:
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
break;
case U8G_COM_MSG_WRITE_BYTE:
u8g_com_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ: {
uint8_t *ptr = (uint8_t*) arg_ptr;
while (arg_val > 0) {
u8g_com_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P: {
uint8_t *ptr = (uint8_t*) arg_ptr;
while (arg_val > 0) {
u8g_com_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
arg_val--;
}
}
break;
}
return 1;
}
#ifdef __cplusplus
}
#endif
#endif // U8GLIB_ST7920
#endif // TARGET_LPC1768

View File

@ -0,0 +1,215 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_std_sw_spi.c
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2015, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef __PLAT_NATIVE_SIM__
#include "../../../inc/MarlinConfig.h"
#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
#undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz
#include <Arduino.h>
#include <U8glib.h>
#ifdef __cplusplus
extern "C" {
#endif
uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
LOOP_L_N(i, 8) {
if (spi_speed == 0) {
WRITE_PIN(mosi_pin, !!(b & 0x80));
WRITE_PIN(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1;
WRITE_PIN(sck_pin, LOW);
}
else {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
LOOP_L_N(j, spi_speed)
WRITE_PIN(mosi_pin, state);
LOOP_L_N(j, spi_speed + (miso_pin >= 0 ? 0 : 1))
WRITE_PIN(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1;
LOOP_L_N(j, spi_speed)
WRITE_PIN(sck_pin, LOW);
}
}
return b;
}
uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
LOOP_L_N(i, 8) {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
if (spi_speed == 0) {
WRITE_PIN(sck_pin, LOW);
WRITE_PIN(mosi_pin, state);
WRITE_PIN(mosi_pin, state); // need some setup time
WRITE_PIN(sck_pin, HIGH);
}
else {
LOOP_L_N(j, spi_speed + (miso_pin >= 0 ? 0 : 1))
WRITE_PIN(sck_pin, LOW);
LOOP_L_N(j, spi_speed)
WRITE_PIN(mosi_pin, state);
LOOP_L_N(j, spi_speed)
WRITE_PIN(sck_pin, HIGH);
}
b <<= 1;
if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1;
}
return b;
}
static uint8_t SPI_speed = 0;
static uint8_t swSpiInit(const uint8_t spi_speed, const uint8_t clk_pin, const uint8_t mosi_pin) {
return spi_speed;
}
static void u8g_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
#if EITHER(FYSETC_MINI_12864, MKS_MINI_12864)
swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
#else
swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
#endif
}
uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch (msg) {
case U8G_COM_MSG_INIT:
u8g_SetPIOutput(u8g, U8G_PI_SCK);
u8g_SetPIOutput(u8g, U8G_PI_MOSI);
u8g_SetPIOutput(u8g, U8G_PI_CS);
u8g_SetPIOutput(u8g, U8G_PI_A0);
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET);
SPI_speed = swSpiInit(SPI_SPEED, u8g->pin_list[U8G_PI_SCK], u8g->pin_list[U8G_PI_MOSI]);
u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
#if EITHER(FYSETC_MINI_12864, MKS_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
if (arg_val) { // SCK idle state needs to be set to the proper idle state before
// the next chip select goes active
u8g_SetPILevel(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active
u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
}
else {
u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
u8g_SetPILevel(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive
}
#else
u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
#endif
break;
case U8G_COM_MSG_WRITE_BYTE:
u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
break;
}
return 1;
}
#ifdef __cplusplus
}
#endif
#elif !ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI, HAS_MARLINUI_HD44780) && HAS_MARLINUI_U8GLIB
#include <U8glib.h>
uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {return 0;}
#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
#endif // __PLAT_NATIVE_SIM__

View File

@ -0,0 +1,27 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define WDT_TIMEOUT 4000000 // 4 second timeout
void watchdog_init();
void HAL_watchdog_refresh();

View File

@ -43,6 +43,8 @@
#define HAL_PATH(PATH, NAME) XSTR(PATH/ESP32/NAME)
#elif defined(__PLAT_LINUX__)
#define HAL_PATH(PATH, NAME) XSTR(PATH/LINUX/NAME)
#elif defined(__PLAT_NATIVE_SIM__)
#define HAL_PATH(PATH, NAME) XSTR(PATH/NATIVE_SIM/NAME)
#elif defined(__SAMD51__)
#define HAL_PATH(PATH, NAME) XSTR(PATH/SAMD51/NAME)
#else

View File

@ -160,7 +160,7 @@ void calibrate_delay_loop();
// Delay in microseconds
#define DELAY_US(x) DELAY_CYCLES((x) * ((F_CPU) / 1000000UL))
#elif defined(__PLAT_LINUX__) || defined(ESP32)
#elif defined(ESP32) || defined(__PLAT_LINUX__) || defined(__PLAT_NATIVE_SIM__)
// DELAY_CYCLES specified inside platform

View File

@ -305,6 +305,9 @@ void serial_echopair_PGM(PGM_P const s_P, unsigned int v);
void serial_echopair_PGM(PGM_P const s_P, unsigned long v);
inline void serial_echopair_PGM(PGM_P const s_P, bool v) { serial_echopair_PGM(s_P, (int)v); }
inline void serial_echopair_PGM(PGM_P const s_P, void *v) { serial_echopair_PGM(s_P, (uintptr_t)v); }
#if __INTPTR_WIDTH__ != __SIZE_WIDTH__
inline void serial_echopair_PGM(PGM_P const s_P, size_t v) { serial_echopair_PGM(s_P, (long int)v); }
#endif
void serial_echo_start();
void serial_error_start();

View File

@ -97,6 +97,11 @@
#define U8G_COM_ST7920_HAL_HW_SPI u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
#define U8G_COM_SSD_I2C_HAL u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
#elif defined(__PLAT_NATIVE_SIM__)
uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_sw_spi_fn
#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_ST7920_sw_spi_fn
#endif
#ifndef U8G_COM_HAL_SW_SPI_FN

View File

@ -360,7 +360,7 @@ void disp_gcode_icon(uint8_t file_num) {
uint32_t lv_open_gcode_file(char *path) {
#if ENABLED(SDSUPPORT)
uint32_t *ps4;
uint32_t pre_sread_cnt = UINT32_MAX;
uintptr_t pre_sread_cnt = UINTPTR_MAX;
char *cur_name;
cur_name = strrchr(path, '/');
@ -370,7 +370,7 @@ uint32_t lv_open_gcode_file(char *path) {
ps4 = (uint32_t *)strstr((char *)public_buf, ";simage:");
// Ignore the beginning message of gcode file
if (ps4) {
pre_sread_cnt = (uint32_t)ps4 - (uint32_t)((uint32_t *)(&public_buf[0]));
pre_sread_cnt = (uintptr_t)ps4 - (uintptr_t)((uint32_t *)(&public_buf[0]));
card.setIndex(pre_sread_cnt);
}
return pre_sread_cnt;

View File

@ -560,11 +560,11 @@ char *creat_title_text() {
#if HAS_GCODE_PREVIEW
uint32_t gPicturePreviewStart = 0;
uintptr_t gPicturePreviewStart = 0;
void preview_gcode_prehandle(char *path) {
#if ENABLED(SDSUPPORT)
uint32_t pre_read_cnt = 0;
uintptr_t pre_read_cnt = 0;
uint32_t *p1;
char *cur_name;
@ -575,7 +575,7 @@ char *creat_title_text() {
p1 = (uint32_t *)strstr((char *)public_buf, ";simage:");
if (p1) {
pre_read_cnt = (uint32_t)p1 - (uint32_t)((uint32_t *)(&public_buf[0]));
pre_read_cnt = (uintptr_t)p1 - (uintptr_t)((uint32_t *)(&public_buf[0]));
To_pre_view = pre_read_cnt;
gcode_preview_over = true;
@ -606,7 +606,7 @@ char *creat_title_text() {
uint32_t br = card.read(public_buf, 400);
uint32_t *p1 = (uint32_t *)strstr((char *)public_buf, ";gimage:");
if (p1) {
gPicturePreviewStart += (uint32_t)p1 - (uint32_t)((uint32_t *)(&public_buf[0]));
gPicturePreviewStart += (uintptr_t)p1 - (uintptr_t)((uint32_t *)(&public_buf[0]));
break;
}
else {

View File

@ -398,7 +398,7 @@ lv_fs_res_t sd_open_cb (lv_fs_drv_t * drv, void * file_p, const char * path, lv_
// find small image size
card.read(public_buf, 512);
public_buf[511] = '\0';
char* eol = strpbrk((const char*)public_buf, "\n\r");
const char* eol = strpbrk((const char*)public_buf, "\n\r");
small_image_size = (uintptr_t)eol - (uintptr_t)((uint32_t *)(&public_buf[0])) + 1;
return LV_FS_RES_OK;
}
@ -530,4 +530,10 @@ void lv_encoder_pin_init() {
#endif // HAS_ENCODER_ACTION
#if __PLAT_NATIVE_SIM__
#include <lv_misc/lv_log.h>
typedef void (*lv_log_print_g_cb_t)(lv_log_level_t level, const char *, uint32_t, const char *);
extern "C" void lv_log_register_print_cb(lv_log_print_g_cb_t print_cb) {}
#endif
#endif // HAS_TFT_LVGL_UI

View File

@ -49,6 +49,10 @@
#define BOARD_INFO_NAME "RAMPS 1.4"
#endif
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME "SimRap 1.4"
#endif
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif
@ -208,6 +212,7 @@
//
#define SDSS 53
#define LED_PIN 13
#define NEOPIXEL_PIN 71
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 5 // Analog Input on AUX2
@ -215,7 +220,7 @@
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 4
#define FIL_RUNOUT_PIN 21
#endif
#ifndef PS_ON_PIN
@ -389,7 +394,54 @@
// LCDs and Controllers //
//////////////////////////
#if HAS_WIRED_LCD
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI)
#define TFT_A0_PIN 43
#define TFT_CS_PIN 49
#define TFT_DC_PIN 43
#define TFT_SCK_PIN SD_SCK_PIN
#define TFT_MOSI_PIN SD_MOSI_PIN
#define TFT_MISO_PIN SD_MISO_PIN
#define LCD_USE_DMA_SPI
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59
#define BEEPER_PIN 42
#define TOUCH_CS_PIN 33
#define SD_DETECT_PIN 41
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_DEVICE 1
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN 31
#define W25QXX_MOSI_PIN SD_MOSI_PIN
#define W25QXX_MISO_PIN SD_MISO_PIN
#define W25QXX_SCK_PIN SD_SCK_PIN
#endif
#define TFT_BUFFER_SIZE 0xFFFF
#ifndef TFT_DRIVER
#define TFT_DRIVER ST7796
#endif
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 63934
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION 63598
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET -1
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -20
#endif
#define BTN_BACK 70
#elif HAS_WIRED_LCD
//
// LCD Display output pins
@ -622,14 +674,18 @@
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31
#define SD_DETECT_PIN 41
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#endif
#endif
// CUSTOM SIMULATOR INPUTS
#define BTN_BACK 70
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD

View File

@ -683,7 +683,7 @@
//
#elif MB(LINUX_RAMPS)
#include "linux/pins_RAMPS_LINUX.h" // Linux env:linux_native
#include "linux/pins_RAMPS_LINUX.h" // Native or Simulation lin:linux_native mac:simulator_macos_debug mac:simulator_macos_release win:simulator_windows lin:simulator_linux_debug lin:simulator_linux_release
#else

View File

@ -48,7 +48,7 @@
return &top - reinterpret_cast<char*>(sbrk(0));
}
#else
#elif defined(__AVR__)
extern char* __brkval;
extern char __bss_end;

View File

@ -939,7 +939,7 @@ const char* CardReader::diveToFile(const bool update_cwd, SdFile* &inDirPtr, con
while (atom_ptr) {
// Find next subdirectory delimiter
char * const name_end = strchr(atom_ptr, '/');
const char * const name_end = strchr(atom_ptr, '/');
// Last atom in the path? Item found.
if (name_end <= atom_ptr) break;

View File

@ -215,7 +215,13 @@ def search_compiler():
# Find the current platform compiler by searching the $PATH
# which will be in a platformio toolchain bin folder
path_regex = re.escape(env['PROJECT_PACKAGES_DIR'])
gcc = "g++"
# See if the environment provides a default compiler
try:
gcc = env.GetProjectOption('custom_deps_gcc')
except:
gcc = "g++"
if env['PLATFORM'] == 'win32':
path_separator = ';'
path_regex += r'.*\\bin'
@ -241,6 +247,8 @@ def search_compiler():
return filepath
filepath = env.get('CXX')
if filepath == 'CC':
filepath = gcc
blab("Couldn't find a compiler! Fallback to %s" % filepath)
return filepath

View File

@ -0,0 +1,52 @@
#
# PlatformIO pre: script for simulator builds
#
# Get the environment thus far for the build
Import("env")
#print(env.Dump())
#
# Give the binary a distinctive name
#
env['PROGNAME'] = "MarlinSimulator"
#
# If Xcode is installed add the path to its Frameworks folder,
# or if Mesa is installed try to use its GL/gl.h.
#
import sys
if sys.platform == 'darwin':
#
# Silence half of the ranlib warnings. (No equivalent for 'ARFLAGS')
#
env['RANLIBFLAGS'] += [ "-no_warning_for_no_symbols" ]
# Default paths for Xcode and a lucky GL/gl.h dropped by Mesa
xcode_path = "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/System/Library/Frameworks"
mesa_path = "/opt/local/include/GL/gl.h"
import os.path
if os.path.exists(xcode_path):
env['BUILD_FLAGS'] += [ "-F" + xcode_path ]
print("Using OpenGL framework headers from Xcode.app")
elif os.path.exists(mesa_path):
env['BUILD_FLAGS'] += [ '-D__MESA__' ]
print("Using OpenGL header from", mesa_path)
else:
print("\n\nNo OpenGL headers found. Install Xcode for matching headers, or use 'sudo port install mesa' to get a GL/gl.h.\n\n")
# Break out of the PIO build immediately
sys.exit(1)
env.AddCustomTarget("upload", "$BUILD_DIR/${PROGNAME}", "$BUILD_DIR/${PROGNAME}")

View File

@ -21,3 +21,110 @@ build_unflags = -Wall
lib_ldf_mode = off
lib_deps =
src_filter = ${common.default_src_filter} +<src/HAL/LINUX>
#
# Native Simulation
# Builds with a small subset of available features
# Required system libraries: SDL2, SDL2-net, OpenGL, GLM
#
# Tested with Linux (Mint 20) : gcc [9.3.0, 10.2.0]: libsdl2-dev[2.0.10], libsdl2-net-dev[2.0.1], libglm-dev[0.9.9.7, 0.9.9.8]
#
# Debugging with gdb in vscode is as easy as adding the launch task as usual, but platformio
# will randomly remove your task when it recreates its tasks from a template. Add your gdb
# launch task to '~/.platformio/penv/lib/python{PYTHON_VERSION}/site-packages/platformio/ide/tpls/vscode/.vscode'
# to avoid this until platformio updates.
#
[simulator_common]
platform = native
framework =
build_flags = ${common.build_flags} -std=gnu++17 -D__PLAT_NATIVE_SIM__ -DU8G_HAL_LINKS -I/usr/include/SDL2 -IMarlin -IMarlin/src/HAL/NATIVE_SIM/include -IMarlin/src/HAL/NATIVE_SIM/u8g
src_build_flags = -Wall -Wno-expansion-to-defined -Wcast-align
release_flags = -g0 -O3 -flto
debug_build_flags = -fstack-protector-strong -g -g3 -ggdb
lib_compat_mode = off
src_filter = ${common.default_src_filter} +<src/HAL/NATIVE_SIM>
lib_deps = ${common.lib_deps}
MarlinSimUI=https://github.com/p3p/MarlinSimUI.git
Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/marlin_sim_native.zip
LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/master.zip
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/simulator.py
[simulator_linux]
extends = simulator_common
build_flags = ${simulator_common.build_flags} -ldl -lpthread -lSDL2 -lSDL2_net -lGL
[env:simulator_linux_debug]
platform = ${simulator_linux.platform}
extends = simulator_linux
build_type = debug
[env:simulator_linux_release]
platform = ${simulator_linux.platform}
extends = simulator_linux
build_type = release
build_flags = ${simulator_linux.build_flags} ${simulator_linux.release_flags}
#
# Simulator for macOS (MacPorts)
#
# sudo port install gcc10 gdb glm libsdl2 freetype
# sudo port install ld64 @3_3 +ld64_xcode
# sudo port uninstall ld64 ld64-latest
# cd /opt/local/bin
# sudo rm -f gcc g++ cc
# sudo ln gcc-mp-10 gcc ; sudo ln g++-mp-10 g++ ; sudo ln g++ cc
# cd -
#
# Use 'sudo port install mesa' to get a <GL/gl.h> if no Xcode is installed.
# If Xcode is installed be sure to run `xcode-select --install` first.
#
# For VSCode debugging paste the block below near the top of launch.json.
# NOTE: The PlatformIO VSCode extension will remove it when regenerating launch.json.
#
# { "name": "Debug Sim",
# "type": "cppdbg",
# "request": "launch",
# "program": "${workspaceFolder}/.pio/build/simulator_macos/MarlinSimulator",
# "miDebuggerPath": "/opt/local/bin/ggdb",
# "MIMode": "gdb",
# "cwd": "${workspaceFolder}/.pio/build/simulator_macos" },
#
[simulator_macos]
build_unflags = -lGL
custom_verbose = 0
build_flags =
-I/opt/local/include
-I/opt/local/include/freetype2
-I/opt/local/include/SDL2/
-L/opt/local/lib
-Wl,-framework,OpenGl
-Wl,-framework,CoreFoundation
-lSDL2
[env:simulator_macos_debug]
platform = ${env:simulator_linux_release.platform}
extends = env:simulator_linux_debug
build_flags = ${env:simulator_linux_debug.build_flags} ${simulator_macos.build_flags} -ggdb -Og -D_THREAD_SAFE
build_unflags = ${simulator_macos.build_unflags}
[env:simulator_macos_release]
platform = ${env:simulator_linux_release.platform}
extends = env:simulator_linux_release
build_flags = ${env:simulator_linux_release.build_flags} ${simulator_macos.build_flags}
build_unflags = ${simulator_macos.build_unflags}
#
# Simulator for Windows 10
#
# MSYS2 mingw-w64-x86_64 with these packages:
# pacman -S --needed base-devel mingw-w64-x86_64-toolchain mingw64/mingw-w64-x86_64-glm mingw64/mingw-w64-x86_64-SDL2 mingw64/mingw-w64-x86_64-SDL2_net
#
[env:simulator_windows]
platform = ${simulator_common.platform}
extends = simulator_common
src_build_flags = ${simulator_common.src_build_flags} -fpermissive
build_flags = ${simulator_common.build_flags} ${simulator_common.debug_build_flags} -fno-stack-protector -Wl,-subsystem,windows -ldl -lmingw32 -lSDL2main -lSDL2 -lSDL2_net -lopengl32 -lssp
build_type = debug