diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 86107f7d86..30c2d3eb87 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -144,6 +144,7 @@ #define BOARD_LEAPFROG_XEED2015 1321 // Leapfrog Xeed 2015 #define BOARD_PICA_REVB 1322 // PICA Shield (original version) #define BOARD_PICA 1323 // PICA Shield (rev C or later) +#define BOARD_INTAMSYS40 1324 // Intamsys 4.0 (Funmat HT) // // ATmega1281, ATmega2561 diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h new file mode 100644 index 0000000000..c688823ddf --- /dev/null +++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h @@ -0,0 +1,152 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Intamsys Funmat HT V4.0 Mainboard + * 4988 Drivers Tested + * 2208 version exists and may or may not work + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Intamsys 4.0" + +// +// Servos +// +#define SERVO0_PIN 12 // Uses High Temp Present Jumper Pin + +// +// Limit Switches +// +#define X_STOP_PIN 22 +#define Y_STOP_PIN 26 +#define Z_MIN_PIN 29 +#define Z_MAX_PIN 69 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 69 +#endif + +#define FIL_RUNOUT_PIN 10 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 // 44 + +#define Y_STEP_PIN 32 // 33 +#define Y_DIR_PIN 33 // 31, 32 +#define Y_ENABLE_PIN 31 // 32 + +#define Z_STEP_PIN 35 // 35 +#define Z_DIR_PIN 36 +#define Z_ENABLE_PIN 34 // 34 + +#define E0_STEP_PIN 42 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 37 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +#define MOTOR_CURRENT_PWM_X_PIN 11 +#define MOTOR_CURRENT_PWM_Y_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 46 + +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 } + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input D62 +#define TEMP_BED_PIN 10 // Analog Input D64 + +#define TEMP_CHAMBER_PIN 9 // Analog Input D63 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 // PWM +#define HEATER_BED_PIN 4 // PWM +#define HEATER_CHAMBER_PIN 3 // PWM +#define FAN_PIN 7 // PWM + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 39 + +#if ENABLED(CASE_LIGHT_ENABLE) + #define CASE_LIGHT_PIN 8 +#endif + +#if ENABLED(PSU_CONTROL) + #define PS_ON_PIN 38 // UPS Module +#endif + +// +// LCD Controller +// + +#define BEEPER_PIN 18 + +#if HAS_SPI_LCD + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 30 + #define LCD_PINS_D4 14 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + #define BTN_EN1 40 + #define BTN_EN2 41 + #define BTN_ENC 19 +#endif + +///////////////////// SPARE HEADERS ////////////// + +/** + * + * J25 + * 1 D54 + * 2 D55 + * 3 D56 + * 4 D57 + * 5 D58 + * 6 D59 + * 7 D60 + * 8 D61 + +Hotend High Temp Connected : D12 +*/ diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index b43ba1cbc6..5de75a1f0e 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -258,6 +258,8 @@ #include "mega/pins_PICA.h" // ATmega2560 env:mega2560 #elif MB(PICA_REVB) #include "mega/pins_PICAOLD.h" // ATmega2560 env:mega2560 +#elif MB(INTAMSYS40) + #include "mega/pins_INTAMSYS40.h" // ATmega2560 env:mega2560 // // ATmega1281, ATmega2561 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index 2f2881ee3f..a8c6d30eb4 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -178,14 +178,14 @@ //#define E4_HARDWARE_SERIAL Serial1 // Unused servo pins may be repurposed with SoftwareSerialM - //#define X_SERIAL_TX_PIN PF8 // SERVO3_PIN - //#define Y_SERIAL_TX_PIN PF9 // SERVO2_PIN - //#define Z_SERIAL_TX_PIN PA1 // SERVO1_PIN - //#define E0_SERIAL_TX_PIN PC3 // SERVO0_PIN - //#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN - //#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN - //#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN - //#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN + //#define X_SERIAL_TX_PIN PF8 // SERVO3_PIN + //#define Y_SERIAL_TX_PIN PF9 // SERVO2_PIN + //#define Z_SERIAL_TX_PIN PA1 // SERVO1_PIN + //#define E0_SERIAL_TX_PIN PC3 // SERVO0_PIN + //#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN + //#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN + //#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN + //#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN // Reduce baud rate for software serial reliability #if HAS_TMC_SW_SERIAL