MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

Marlin code whitespace cleanup

Browse Source
This commit is contained in:
Scott Lahteine 2017-09-27 04:57:14 -05:00
parent 9dd5390d7d
commit dff2904c0f
7 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -1392,9 +1392,9 @@
#define MAX7219_DEBUG
#if ENABLED(MAX7219_DEBUG)
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
/**
* Sample debug features

2
Marlin/src/feature/caselight.cpp
View File

@ -26,7 +26,7 @@
uint8_t case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
bool case_light_on = CASE_LIGHT_DEFAULT_ON;
#ifndef INVERT_CASE_LIGHT
#define INVERT_CASE_LIGHT false
#endif

2
Marlin/src/feature/dac/dac_dac084s085.cpp
View File

@ -74,7 +74,7 @@ void dac084s085::setValue(uint8_t channel, uint8_t value) {
externalDac_buf[0] |= (value >> 4);
externalDac_buf[1] |= (value << 4);
// All SPI chip-select HIGH
digitalWrite( DAC0_SYNC , HIGH );
#if EXTRUDERS > 1

2
Marlin/src/gcode/calibrate/G33.cpp
View File

@ -375,7 +375,7 @@ void GcodeSuite::G33() {
float a_sum = 0.0;
LOOP_XYZ(axis) a_sum += delta_tower_angle_trim[axis];
LOOP_XYZ(axis) delta_tower_angle_trim[axis] -= a_sum / 3.0;
// adjust delta_height and endstops by the max amount
const float z_temp = MAX3(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]);
home_offset[Z_AXIS] -= z_temp;

16
Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h
View File

@ -142,13 +142,13 @@ uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg
ST7565_WRITE_BYTE(0x40); // Display start line for Displaytech 64128N
ST7565_WRITE_BYTE(0x28 | 0x04); // power control: turn on voltage converter
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
ST7565_WRITE_BYTE(0x28 | 0x06); // power control: turn on voltage regulator
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
ST7565_WRITE_BYTE(0x28 | 0x07); // power control: turn on voltage follower
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
//U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used
ST7565_WRITE_BYTE(0x10); // Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N
@ -228,12 +228,12 @@ u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = { u8g_dev_st7565_64128n_2x_VIKI
class U8GLIB_ST7565_64128n_2x_VIKI : public U8GLIB {
public:
U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy)
: U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy)
: U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
{ }
U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
{ }
U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi)
{ }
};
#pragma GCC reset_options

6
Marlin/src/lcd/ultralcd_impl_DOGM.h
View File

@ -176,9 +176,9 @@
//U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
#elif ENABLED(U8GLIB_ST7565_64128N)
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller
//U8GLIB_ST7565_64128n_2x_VIKI u8g(0); // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK
U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller
//U8GLIB_ST7565_64128n_2x_VIKI u8g(0); // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK
U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI
//U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
//U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes HWSPI
#elif ENABLED(U8GLIB_SSD1306)

2
Marlin/src/module/stepper.h
View File

@ -302,7 +302,7 @@ class Stepper {
#endif
#ifdef CPU_32_BIT
// In case of high-performance processor, it is able to calculate in real-time
// In case of high-performance processor, it is able to calculate in real-time
timer = (uint32_t)(HAL_STEPPER_TIMER_RATE) / step_rate;
if (timer < (HAL_STEPPER_TIMER_RATE / (STEP_DOUBLER_FREQUENCY * 2))) { // (STEP_DOUBLER_FREQUENCY * 2 kHz - this should never happen)
timer = (HAL_STEPPER_TIMER_RATE / (STEP_DOUBLER_FREQUENCY * 2));