Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1

Marlin/Configuration.h

@@ -197,7 +197,16 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
 //#define ULTRA_LCD  //general lcd support, also 16x2
 //#define SDSUPPORT // Enable SD Card Support in Hardware Console
 
-#define ULTIPANEL
+//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
+//#define ULTIPANEL  //the ultipanel as on thingiverse
+
+
+#ifdef ULTIMAKERCONTROLLER    //automatic expansion
+ #define ULTIPANEL
+ #define NEWPANEL
+#endif 
+ 
+
 #ifdef ULTIPANEL
 //  #define NEWPANEL  //enable this if you have a click-encoder panel
   #define SDSUPPORT

Marlin/Marlin.pde

@@ -609,7 +609,7 @@ void process_commands()
       feedrate = 0.0;
       home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2])));
       #ifdef QUICK_HOME
-      if( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS]) )  //first diagonal move
+      if((home_all_axis)||( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS])) )  //first diagonal move
       {
         current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0;  
 
@@ -1100,6 +1100,12 @@ void process_commands()
       
       SERIAL_PROTOCOLLN("");
       break;
+    case 120: // M120
+      enable_endstops(false) ;
+      break;
+    case 121: // M121
+      enable_endstops(true) ;
+      break;
     case 119: // M119
       #if (X_MIN_PIN > -1)
         SERIAL_PROTOCOLPGM(MSG_X_MIN);

Marlin/language.h

@@ -29,6 +29,8 @@
 	#define MSG_MOVE_AXIS " Move Axis      \x7E"
 	#define MSG_SPEED " Speed:"
 	#define MSG_NOZZLE " \002Nozzle:"
+	#define MSG_NOZZLE1 " \002Nozzle2:"
+	#define MSG_NOZZLE2 " \002Nozzle3:"
 	#define MSG_BED " \002Bed:"
 	#define MSG_FAN_SPEED " Fan speed:"
 	#define MSG_FLOW " Flow:"
@@ -174,6 +176,8 @@
         #define MSG_MOVE_AXIS " Achsen verfahren   \x7E"
 	#define MSG_SPEED " Geschw:"
 	#define MSG_NOZZLE " \002Duese:"
+	#define MSG_NOZZLE1 " \002Duese2:"
+	#define MSG_NOZZLE2 " \002Duese3:"
 	#define MSG_BED " \002Bett:"
 	#define MSG_FAN_SPEED " Luefter geschw.:"
 	#define MSG_FLOW " Fluss:"

Marlin/pins.h

@@ -729,10 +729,18 @@
     #define LCD_PINS_D7 19
     
     //encoder rotation values
+    #ifndef ULTIMAKERCONTROLLER
      #define encrot0 0
      #define encrot1 2
      #define encrot2 3
      #define encrot3 1
+    #else
+     #define encrot0 0
+     #define encrot1 1
+     #define encrot2 3
+     #define encrot3 2
+
+    #endif
 
     #define SDCARDDETECT -1
     //bits in the shift register that carry the buttons for:

Marlin/stepper.cpp

@@ -85,7 +85,7 @@ volatile char count_direction[NUM_AXIS] = { 1, 1, 1, 1};
 #ifdef ENDSTOPS_ONLY_FOR_HOMING
   #define CHECK_ENDSTOPS  if(check_endstops)
 #else
-  #define CHECK_ENDSTOPS
+  #define CHECK_ENDSTOPS  if(check_endstops)
 #endif
 
 // intRes = intIn1 * intIn2 >> 16

Marlin/temperature.cpp

@@ -710,7 +710,7 @@ void max_temp_error(uint8_t e) {
   disable_heater();
   if(IsStopped() == false) {
     SERIAL_ERROR_START;
-    SERIAL_ERRORLN(e);
+    SERIAL_ERRORLN((int)e);
     SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !");
   }
 }
@@ -719,13 +719,15 @@ void min_temp_error(uint8_t e) {
   disable_heater();
   if(IsStopped() == false) {
     SERIAL_ERROR_START;
-    SERIAL_ERRORLN(e);
+    SERIAL_ERRORLN((int)e);
     SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !");
   }
 }
 
 void bed_max_temp_error(void) {
+#if HEATER_BED_PIN > -1
   WRITE(HEATER_BED_PIN, 0);
+#endif
   if(IsStopped() == false) {
     SERIAL_ERROR_START;
     SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!");

Marlin/temperature.h

@@ -129,6 +129,8 @@ FORCE_INLINE bool isCoolingBed() {
 #define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
 #define isHeatingHotend1() isHeatingHotend(1)
 #define isCoolingHotend1() isCoolingHotend(1)
+#else
+#define setTargetHotend1(_celsius) do{}while(0)
 #endif
 #if EXTRUDERS > 2
 #define degHotend2() degHotend(2)
@@ -136,6 +138,8 @@ FORCE_INLINE bool isCoolingBed() {
 #define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
 #define isHeatingHotend2() isHeatingHotend(2)
 #define isCoolingHotend2() isCoolingHotend(2)
+#else
+#define setTargetHotend2(_celsius) do{}while(0)
 #endif
 #if EXTRUDERS > 3
 #error Invalid number of extruders

Marlin/ultralcd.pde

@@ -95,6 +95,7 @@ FORCE_INLINE void clear()
 void lcd_init()
 {
   //beep();
+  
   byte Degree[8] =
   {
     B01100,
@@ -322,6 +323,8 @@ void MainMenu::showStatus()
     lcd.setCursor(0,0);lcdprintPGM("\002---/---\001 ");
     #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 
       lcd.setCursor(10,0);lcdprintPGM("B---/---\001 ");
+    #elif EXTRUDERS > 1
+      lcd.setCursor(10,0);lcdprintPGM("\002---/---\001 ");
     #endif
   }
     
@@ -356,6 +359,23 @@ void MainMenu::showStatus()
       lcd.print(ftostr3(targetBed));
       oldtargetBed=targetBed;
     }
+  #elif EXTRUDERS > 1
+    static int olddegHotEnd1=-1;
+    static int oldtargetHotEnd1=-1;
+    int tHotEnd1=intround(degHotend1());
+    if((tHotEnd1!=olddegHotEnd1)||force_lcd_update)
+    {
+      lcd.setCursor(11,0);
+      lcd.print(ftostr3(tHotEnd1));
+      olddegHotEnd1=tHotEnd1;
+    }
+    int ttHotEnd1=intround(degTargetHotend1());
+    if((ttHotEnd1!=oldtargetHotEnd1)||force_lcd_update)
+    {
+      lcd.setCursor(15,0);
+      lcd.print(ftostr3(ttHotEnd1));
+      oldtargetHotEnd1=ttHotEnd1;
+    }
   #endif
   //starttime=2;
   static uint16_t oldtime=0;
@@ -430,10 +450,7 @@ void MainMenu::showStatus()
   if(force_lcd_update)  //initial display of content
   {
     encoderpos=feedmultiply;
-    lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 ");
+    lcd.setCursor(0,0);lcdprintPGM("\002---/---\001 ");
-    #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 
-    lcd.setCursor(10,0);lcdprintPGM("B123/567\001 ");
-    #endif
   }
     
   int tHotEnd0=intround(degHotend0());
@@ -520,7 +537,7 @@ void MainMenu::showPrepare()
       beepshort(); );
       break;
     case ItemP_cooldown:
-      MENUITEM(  lcdprintPGM(MSG_COOLDOWN)  ,  BLOCK;setTargetHotend0(0);setTargetBed(0);beepshort(); ) ;
+      MENUITEM(  lcdprintPGM(MSG_COOLDOWN)  ,  BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
       break;
 //    case ItemP_extrude:
   //    MENUITEM(  lcdprintPGM(" Extrude")  ,  BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
@@ -923,12 +940,18 @@ void MainMenu::showTune()
 //   
 
 enum {
-  ItemCT_exit,ItemCT_nozzle,
+  ItemCT_exit,ItemCT_nozzle0,
 #ifdef AUTOTEMP
   ItemCT_autotempactive,
   ItemCT_autotempmin,ItemCT_autotempmax,ItemCT_autotempfact,
 #endif
-#if (HEATER_BED_PIN > -1)
+#if EXTRUDERS > 1
+  ItemCT_nozzle1,
+#endif
+#if EXTRUDERS > 2
+  ItemCT_nozzle2,
+#endif
+#if defined BED_USES_THERMISTOR || BED_USES_AD595
 ItemCT_bed,
 #endif  
   ItemCT_fan,
@@ -946,7 +969,7 @@ void MainMenu::showControlTemp()
     case ItemCT_exit:
       MENUITEM(  lcdprintPGM(MSG_CONTROL)  ,  BLOCK;status=Main_Control;beepshort(); ) ;
       break;
-    case ItemCT_nozzle:
+    case ItemCT_nozzle0:
       {
         if(force_lcd_update)
         {
@@ -980,6 +1003,78 @@ void MainMenu::showControlTemp()
         }
         
       }break;
+    #if EXTRUDERS > 1
+    case ItemCT_nozzle1:
+      {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE1);
+          lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend1())));
+        }
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED)
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+              encoderpos=intround(degTargetHotend1());
+          }
+          else
+          {
+            setTargetHotend1(encoderpos);
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>260) encoderpos=260;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+        
+      }break;
+    #endif
+    #if EXTRUDERS > 2
+    case ItemCT_nozzle2:
+      {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE2);
+          lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend2())));
+        }
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED)
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+              encoderpos=intround(degTargetHotend2());
+          }
+          else
+          {
+            setTargetHotend1(encoderpos);
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>260) encoderpos=260;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+        
+      }break;
+    #endif
     #ifdef AUTOTEMP
     case ItemCT_autotempmin:
       {
@@ -1111,7 +1206,7 @@ void MainMenu::showControlTemp()
         
       }break;  
     #endif //autotemp
-      #if (HEATER_BED_PIN > -1)
+    #if defined BED_USES_THERMISTOR || BED_USES_AD595
     case ItemCT_bed:
       {
         if(force_lcd_update)
@@ -2080,6 +2175,7 @@ void MainMenu::update()
     {
       force_lcd_update=true;
       oldcardstatus=CARDINSERTED;
+      lcd_init(); // to maybe revive the lcd if static electricty killed it.
       //Serial.println("echo: SD CHANGE");
       if(CARDINSERTED)
       {