diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 83c2bedbc8..6155dde80a 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -445,8 +445,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index a45911858f..e898122c32 100755
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -92,6 +92,7 @@
 #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #include "endstop_interrupts.h"
 #endif
+
 /**
  * Look here for descriptions of G-codes:
  *  - http://linuxcnc.org/handbook/gcode/g-code.html
@@ -10020,7 +10021,7 @@ void setup() {
   #endif
 
   #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
-    setup_enstop_interrupts();
+    setup_endstop_interrupts();
   #endif
 }
 
diff --git a/Marlin/endstop_interrupts.h b/Marlin/endstop_interrupts.h
index db8691d192..1aea16a47c 100644
--- a/Marlin/endstop_interrupts.h
+++ b/Marlin/endstop_interrupts.h
@@ -21,191 +21,186 @@
  */
 
 /**
- *  Endstop interrupts
- *  Without endstop interrups the stepper-ISR must always test all endstops when interested in their states (endstops.update()).
- *  Most time the test will result in finding out nothing has changed.
- *  With endstop interrupts endstops.update() is called only when we know that at least one endstop has changed its state.
+ * Endstop Interrupts
  *
- *  This can work only if all __used__ endstop pins can provide ether an 'external interrupt' or a 'pin change interrupt'.
- *  You can find out about pins issuing interrupts by running 'pin_interrupt_test.ino' (Marlin\buildroot\share\pin_interrupt_test\pin_interrupt_test.ino)
+ * Without endstop interrupts the endstop pins must be polled continually in
+ * the stepper-ISR via endstops.update(), most of the time finding no change.
+ * With this feature endstops.update() is called only when we know that at
+ * least one endstop has changed state, saving valuable CPU cycles.
+ *
+ * This feature only works when all used endstop pins can generate either an
+ * 'external interrupt' or a 'pin change interrupt'.
+ *
+ * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
+ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
  */
 
  #ifndef _ENDSTOP_INTERRUPTS_H_
-   #define _ENDSTOP_INTERRUPTS_H_
+ #define _ENDSTOP_INTERRUPTS_H_
 
-  /**
-   * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)  
-   *
-   * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
-   * So we extend them here because this are the normal pins for Y_MIN and Y_MAX on RAMPS.
-   * There are more PCI enabled processor pins on Port J, but they are not connected to Arduino MEGA.
-   */
-  #if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
-    #undef  digitalPinToPCICR
-    #define digitalPinToPCICR(p)    ( (((p) >= 10) && ((p) <= 15)) || \
-                                    (((p) >= 50) && ((p) <= 53)) || \
-                                    (((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
-    #undef  digitalPinToPCICRbit
-    #define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \
-                                    ( (((p) >= 14) && ((p) <= 15)) ? 1 : \
-                                    ( (((p) >= 62) && ((p) <= 69)) ? 2 : \
-                                    0 ) ) )
-    #undef  digitalPinToPCMSK
-    #define digitalPinToPCMSK(p)    ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \
-                                    ( (((p) >= 14) && ((p) <= 15)) ? (&PCMSK1) : \
-                                    ( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \
-                                    ((uint8_t *)0) ) ) )
-    #undef  digitalPinToPCMSKbit
-    #define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \
-                                    ( ((p) == 14) ? 2 : \
-                                    ( ((p) == 15) ? 1 : \
-                                    ( ((p) == 50) ? 3 : \
-                                    ( ((p) == 51) ? 2 : \
-                                    ( ((p) == 52) ? 1 : \
-                                    ( ((p) == 53) ? 0 : \
-                                    ( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \
-                                    0 ) ) ) ) ) ) ) )
+/**
+ * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
+ *
+ * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
+ * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
+ * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
+ */
+#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
+  #undef  digitalPinToPCICR
+  #define digitalPinToPCICR(p)    ( (((p) >= 10) && ((p) <= 15)) || \
+                                  (((p) >= 50) && ((p) <= 53)) || \
+                                  (((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
+  #undef  digitalPinToPCICRbit
+  #define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \
+                                  ( (((p) >= 14) && ((p) <= 15)) ? 1 : \
+                                  ( (((p) >= 62) && ((p) <= 69)) ? 2 : \
+                                  0 ) ) )
+  #undef  digitalPinToPCMSK
+  #define digitalPinToPCMSK(p)    ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \
+                                  ( (((p) >= 14) && ((p) <= 15)) ? (&PCMSK1) : \
+                                  ( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \
+                                  ((uint8_t *)0) ) ) )
+  #undef  digitalPinToPCMSKbit
+  #define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \
+                                  ( ((p) == 14) ? 2 : \
+                                  ( ((p) == 15) ? 1 : \
+                                  ( ((p) == 50) ? 3 : \
+                                  ( ((p) == 51) ? 2 : \
+                                  ( ((p) == 52) ? 1 : \
+                                  ( ((p) == 53) ? 0 : \
+                                  ( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \
+                                  0 ) ) ) ) ) ) ) )
+#endif
+
+volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail.
+                            // Must be reset to 0 by the test function when the tests are finished.
+
+// Install Pin change interrupt for a pin. Can be called multiple times.
+void pciSetup(byte pin) {
+  *digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin));  // enable pin
+  PCIFR  |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
+  PCICR  |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
+}
+
+// This is what is really done inside the interrupts.
+FORCE_INLINE void endstop_ISR_worker( void ) {
+  e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
+}
+
+// Use one Routine to handle each group
+// One ISR for all EXT-Interrupts
+void endstop_ISR(void) { endstop_ISR_worker(); }
+
+// Handlers for pin change interrupts
+#ifdef PCINT0_vect
+  ISR(PCINT0_vect) { endstop_ISR_worker(); }
+#endif
+
+#ifdef PCINT1_vect
+  ISR(PCINT1_vect) { endstop_ISR_worker(); }
+#endif
+
+#ifdef PCINT2_vect
+  ISR(PCINT2_vect) { endstop_ISR_worker(); }
+#endif
+
+#ifdef PCINT3_vect
+  ISR(PCINT3_vect) { endstop_ISR_worker(); }
+#endif
+
+void setup_endstop_interrupts( void ) {
+
+  #if HAS_X_MAX
+    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
+      attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR"); // if pin has no pin change interrupt - error
+      pciSetup(X_MAX_PIN);                                                            // assign it
+    #endif
   #endif
 
-  volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail. 
-                              // Must be reset to 0 by the test function when the tests are finished.
-
-  // Install Pin change interrupt for a pin, can be called multiple times
-  void pciSetup(byte pin) {
-    *digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin));  // enable pin
-    PCIFR  |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
-    PCICR  |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
-  }
-
-  // This is what is really done inside the interrupts.
-  FORCE_INLINE void endstop_ISR_worker( void ) {
-    e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
-  }
-
-  // Use one Routine to handle each group
-  // One ISR for all EXT-Interrupts
-  void endstop_ISR(void) {
-    endstop_ISR_worker();
-  }
-
-  #ifdef PCINT0_vect
-    ISR(PCINT0_vect) { // handle pin change interrupt
-      endstop_ISR_worker();
-    }
+  #if HAS_X_MIN
+    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(X_MIN_PIN);
+    #endif
   #endif
 
-  #ifdef PCINT1_vect
-    ISR(PCINT1_vect) { // handle pin change interrupt
-      endstop_ISR_worker();
-    }
+  #if HAS_Y_MAX
+    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Y_MAX_PIN);
+    #endif
   #endif
 
-  #ifdef PCINT2_vect
-    ISR(PCINT2_vect) { // handle pin change interrupt
-      endstop_ISR_worker();
-    }
+  #if HAS_Y_MIN
+    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Y_MIN_PIN);
+    #endif
   #endif
 
-  #ifdef PCINT3_vect
-    ISR(PCINT3_vect) { // handle pin change interrupt
-      endstop_ISR_worker();
-    }
+  #if HAS_Z_MAX
+    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Z_MAX_PIN);
+    #endif
   #endif
 
-  void setup_enstop_interrupts( void ) {
-
-    #if HAS_X_MAX
-      #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
-        attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR"); // if pin has no pin change interrupt - error
-        pciSetup(X_MAX_PIN);                                                            // assign it
-      #endif
+  #if HAS_Z_MIN
+    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Z_MIN_PIN);
     #endif
+  #endif
 
-    #if HAS_X_MIN
-      #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(X_MIN_PIN);
-      #endif
+  #if HAS_Z2_MAX
+    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Z2_MAX_PIN);
     #endif
+  #endif
 
-    #if HAS_Y_MAX
-      #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Y_MAX_PIN);
-      #endif
+  #if HAS_Z2_MIN
+    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Z2_MIN_PIN);
     #endif
+  #endif
 
-    #if HAS_Y_MIN
-      #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Y_MIN_PIN);
-      #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
+      pciSetup(Z_MIN_PROBE_PIN);
     #endif
+  #endif
 
-    #if HAS_Z_MAX
-      #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Z_MAX_PIN);
-      #endif
-    #endif
-
-    #if HAS_Z_MIN
-      #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Z_MIN_PIN);
-      #endif
-    #endif
-
-    #if HAS_Z2_MAX
-      #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Z2_MAX_PIN);
-      #endif
-    #endif
-
-    #if HAS_Z2_MIN
-      #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Z2_MIN_PIN);
-      #endif
-    #endif
-
-    #if HAS_Z_MIN_PROBE_PIN
-      #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
-        attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
-      #else
-        // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-        static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
-        pciSetup(Z_MIN_PROBE_PIN);
-      #endif
-    #endif
-
-    // When we arive here without error each pin has ether a EXT-interrupt or a PCI.
-  }
-
+  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
+}
 
 #endif //_ENDSTOP_INTERRUPTS_H_
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 107132aad7..d9937ea47f 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -445,8 +445,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 6fa3945388..b37924de2b 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -427,8 +427,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 34ffdbfba0..65746d5a51 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -427,8 +427,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index fba7318ad5..b94352f3f7 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -437,8 +437,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index d26986eca5..9a15c70bd9 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -439,8 +439,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 424d786d36..f9bcff2567 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -462,8 +462,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index 43bef5ad51..7d131080db 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -445,8 +445,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index 61e6c454d3..2f37770cbc 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -445,8 +445,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 12f7ac8b16..2658ed7b74 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -445,8 +445,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index c41ca134ba..fb0e96f76a 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -442,8 +442,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 31b9d55597..175d110c95 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -460,8 +460,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index c056168b16..4084102f47 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -466,8 +466,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 1ede76f5f8..f605f0959f 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -437,8 +437,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 429c4efc24..f3db087b5b 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -445,8 +445,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 8c1c508f94..461a279cf8 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -489,8 +489,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index e0023377d3..be3f457df3 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -489,8 +489,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 8387854662..81afe3b4c6 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -489,8 +489,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 73289f88f4..5473e18558 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -478,8 +478,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index dec2c11a07..ea69803cf5 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -487,8 +487,8 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 0f28212e51..80a650ebd7 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -448,8 +448,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 95a5e87d4b..b5d50413a4 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -435,8 +435,8 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
-// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
-// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
 //=============================================================================
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index 9f712faad8..7e0c744f19 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -378,19 +378,21 @@ void Stepper::isr() {
   }
 
   // Update endstops state, if enabled
-  if (endstops.enabled
+  if ((endstops.enabled
     #if HAS_BED_PROBE
       || endstops.z_probe_enabled
     #endif
-  )
-  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
-    if(e_hit) {
-  #endif
-      endstops.update();
-  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+    )
+    #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+      && e_hit
+    #endif
+  ) {
+    endstops.update();
+
+    #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
       e_hit--;
-    }
-  #endif
+    #endif
+  }
 
   // Take multiple steps per interrupt (For high speed moves)
   bool all_steps_done = false;