MPCNC
/
Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

✨ TFT_COLOR_UI async DMA SPI (#24980)

This commit is contained in:
Alexander Gavrilenko 2022-12-13 00:13:31 +03:00 committed by Scott Lahteine
parent d082223fee
commit ec6349f2ac
31 changed files with 500 additions and 227 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Configuration.h
View File

@ -3132,6 +3132,10 @@
//#define TFT_COLOR_UI
//#define TFT_LVGL_UI
#if ENABLED(TFT_COLOR_UI)
//#define TFT_SHARED_SPI // SPI is shared between TFT display and other devices. Disable async data transfer
#endif
#if ENABLED(TFT_LVGL_UI)
//#define MKS_WIFI_MODULE // MKS WiFi module
#endif

47
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
View File

@ -318,8 +318,16 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Enable DMA
GPDMA_ChannelCmd(0, ENABLE);
/*
* Observed behaviour on normal data transfer completion (SKR 1.3 board / LPC1768 MCU)
* GPDMA_STAT_INTTC flag is SET
* GPDMA_STAT_INTERR flag is NOT SET
* GPDMA_STAT_RAWINTTC flag is NOT SET
* GPDMA_STAT_RAWINTERR flag is SET
*/
// Wait for data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
while (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) {}
// Clear err and int
GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
@ -333,6 +341,43 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
}
void SPIClass::dmaSendAsync(void *buf, uint16_t length, bool minc) {
//TODO: LPC dma can only write 0xFFF bytes at once.
GPDMA_Channel_CFG_Type GPDMACfg;
/* Configure GPDMA channel 0 -------------------------------------------------------------*/
/* DMA Channel 0 */
GPDMACfg.ChannelNum = 0;
// Source memory
GPDMACfg.SrcMemAddr = (uint32_t)buf;
// Destination memory - Not used
GPDMACfg.DstMemAddr = 0;
// Transfer size
GPDMACfg.TransferSize = length;
// Transfer width
GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
// Transfer type
GPDMACfg.TransferType = GPDMA_TRANSFERTYPE_M2P;
// Source connection - unused
GPDMACfg.SrcConn = 0;
// Destination connection
GPDMACfg.DstConn = (_currentSetting->spi_d == LPC_SSP0) ? GPDMA_CONN_SSP0_Tx : GPDMA_CONN_SSP1_Tx;
GPDMACfg.DMALLI = 0;
// Enable dma on SPI
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
// Only increase memory if minc is true
GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
// Setup channel with given parameter
GPDMA_Setup(&GPDMACfg);
// Enable DMA
GPDMA_ChannelCmd(0, ENABLE);
}
uint16_t SPIClass::read() {
return SSP_ReceiveData(_currentSetting->spi_d);
}

1
Marlin/src/HAL/LPC1768/include/SPI.h
View File

@ -155,6 +155,7 @@ public:
void read(uint8_t *buf, uint32_t len);
void dmaSend(void *buf, uint16_t length, bool minc);
void dmaSendAsync(void *buf, uint16_t length, bool minc);
/**
* @brief Sets the number of the SPI peripheral to be used by

97
Marlin/src/HAL/LPC1768/tft/tft_spi.cpp
View File

@ -26,7 +26,7 @@
#include "tft_spi.h"
SPIClass TFT_SPI::SPIx(1);
SPIClass TFT_SPI::SPIx(TFT_SPI_DEVICE);
void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET)
@ -38,40 +38,10 @@ void TFT_SPI::Init() {
OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
#endif
SET_OUTPUT(TFT_DC_PIN);
SET_OUTPUT(TFT_CS_PIN);
WRITE(TFT_DC_PIN, HIGH);
WRITE(TFT_CS_PIN, HIGH);
OUT_WRITE(TFT_DC_PIN, HIGH);
OUT_WRITE(TFT_CS_PIN, HIGH);
/**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
* STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
*/
#if 0
#if SPI_DEVICE == 1
#define SPI_CLOCK_MAX SPI_CLOCK_DIV4
#else
#define SPI_CLOCK_MAX SPI_CLOCK_DIV2
#endif
uint8_t clock;
uint8_t spiRate = SPI_FULL_SPEED;
switch (spiRate) {
case SPI_FULL_SPEED: clock = SPI_CLOCK_MAX ; break;
case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4 ; break;
case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8 ; break;
case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
#endif
#if TFT_MISO_PIN == BOARD_SPI1_MISO_PIN
SPIx.setModule(1);
#elif TFT_MISO_PIN == BOARD_SPI2_MISO_PIN
SPIx.setModule(2);
#endif
SPIx.setModule(TFT_SPI_DEVICE);
SPIx.setClock(SPI_CLOCK_MAX_TFT);
SPIx.setBitOrder(MSBFIRST);
SPIx.setDataMode(SPI_MODE0);
@ -114,17 +84,62 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
return data >> 7;
}
bool TFT_SPI::isBusy() { return false; }
bool TFT_SPI::isBusy() {
#define __IS_DMA_CONFIGURED(__HANDLE__) ((__HANDLE__)->DMACCSrcAddr != 0)
void TFT_SPI::Abort() { DataTransferEnd(); }
// DMA Channel 0 is hardcoded in dmaSendAsync() and dmaSend()
if (!__IS_DMA_CONFIGURED(LPC_GPDMACH0)) return false;
void TFT_SPI::Transmit(uint16_t Data) { SPIx.transfer(Data); }
if (GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) {
// You should not be here - DMA transfer error flag is set
// Abort DMA transfer and release SPI
}
else {
// Check if DMA transfer completed flag is set
if (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0)) return true;
// Check if SPI TX butter is empty and SPI is idle
if ((SSP_GetStatus(LPC_SSPx, SSP_STAT_TXFIFO_EMPTY) == RESET) || (SSP_GetStatus(LPC_SSPx, SSP_STAT_BUSY) == SET)) return true;
}
Abort();
return false;
}
void TFT_SPI::Abort() {
// DMA Channel 0 is hardcoded in dmaSendAsync() and dmaSend()
// Disable DMA
GPDMA_ChannelCmd(0, DISABLE);
// Clear ERR and TC
GPDMA_ClearIntPending(GPDMA_STATCLR_INTTC, 0);
GPDMA_ClearIntPending(GPDMA_STATCLR_INTERR, 0);
// Disable DMA on SPI
SSP_DMACmd(LPC_SSPx, SSP_DMA_TX, DISABLE);
// Deconfigure DMA Channel 0
LPC_GPDMACH0->DMACCControl = 0U;
LPC_GPDMACH0->DMACCConfig = 0U;
LPC_GPDMACH0->DMACCSrcAddr = 0U;
LPC_GPDMACH0->DMACCDestAddr = 0U;
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin(DATASIZE_16BIT);
WRITE(TFT_DC_PIN, HIGH);
SPIx.dmaSend(Data, Count, MemoryIncrease);
DataTransferEnd();
}
void TFT_SPI::Transmit(uint16_t Data) { SPIx.transfer(Data); }
void TFT_SPI::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin(DATASIZE_16BIT);
SPIx.dmaSend(Data, Count, MemoryIncrease);
Abort();
}
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin(DATASIZE_16BIT);
SPIx.dmaSendAsync(Data, Count, MemoryIncrease);
TERN_(TFT_SHARED_SPI, while (isBusy()));
}
#endif // HAS_SPI_TFT

42
Marlin/src/HAL/LPC1768/tft/tft_spi.h
View File

@ -27,6 +27,18 @@
#include <lpc17xx_ssp.h>
// #include <lpc17xx_gpdma.h>
#define IS_SPI(N) (BOARD_NR_SPI >= N && (TFT_SCK_PIN == BOARD_SPI##N##_SCK_PIN) && (TFT_MOSI_PIN == BOARD_SPI##N##_MOSI_PIN) && (TFT_MISO_PIN == BOARD_SPI##N##_MISO_PIN))
#if IS_SPI(1)
#define TFT_SPI_DEVICE 1
#define LPC_SSPx LPC_SSP0
#elif IS_SPI(2)
#define TFT_SPI_DEVICE 2
#define LPC_SSPx LPC_SSP1
#else
#error "Invalid TFT SPI configuration."
#endif
#undef IS_SPI
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
@ -34,17 +46,19 @@
#define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341)
#endif
#define DATASIZE_8BIT SSP_DATABIT_8
#define DATASIZE_16BIT SSP_DATABIT_16
#define TFT_IO_DRIVER TFT_SPI
#define DATASIZE_8BIT SSP_DATABIT_8
#define DATASIZE_16BIT SSP_DATABIT_16
#define TFT_IO_DRIVER TFT_SPI
#define DMA_MAX_SIZE 0xFFF
#define DMA_MINC_ENABLE 1
#define DMA_MINC_DISABLE 0
#define DMA_MINC_ENABLE 1
#define DMA_MINC_DISABLE 0
class TFT_SPI {
private:
static uint32_t ReadID(uint16_t Reg);
static void Transmit(uint16_t Data);
static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
@ -56,22 +70,20 @@ public:
static void Abort();
static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT);
static void DataTransferEnd() { OUT_WRITE(TFT_CS_PIN, HIGH); SPIx.end(); };
static void DataTransferEnd() { WRITE(TFT_CS_PIN, HIGH); SSP_Cmd(LPC_SSPx, DISABLE); };
static void DataTransferAbort();
static void WriteData(uint16_t Data) { Transmit(Data); }
static void WriteReg(uint16_t Reg) { OUT_WRITE(TFT_A0_PIN, LOW); Transmit(Reg); OUT_WRITE(TFT_A0_PIN, HIGH); }
static void WriteReg(uint16_t Reg) { WRITE(TFT_DC_PIN, LOW); Transmit(Reg); WRITE(TFT_DC_PIN, HIGH); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
// static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
//LPC dma can only write 0xFFF bytes at once.
#define MAX_DMA_SIZE (0xFFF - 1)
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > MAX_DMA_SIZE ? MAX_DMA_SIZE : Count);
Count = Count > MAX_DMA_SIZE ? Count - MAX_DMA_SIZE : 0;
Transmit(DMA_MINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
}
#undef MAX_DMA_SIZE
}
};

8
Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
View File

@ -44,9 +44,11 @@ uint16_t delta(uint16_t a, uint16_t b) { return a > b ? a - b : b - a; }
#endif
void XPT2046::Init() {
SET_INPUT(TOUCH_MISO_PIN);
SET_OUTPUT(TOUCH_MOSI_PIN);
SET_OUTPUT(TOUCH_SCK_PIN);
#if DISABLED(TOUCH_BUTTONS_HW_SPI)
SET_INPUT(TOUCH_MISO_PIN);
SET_OUTPUT(TOUCH_MOSI_PIN);
SET_OUTPUT(TOUCH_SCK_PIN);
#endif
OUT_WRITE(TOUCH_CS_PIN, HIGH);
#if PIN_EXISTS(TOUCH_INT)

33
Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
View File

@ -148,20 +148,35 @@ uint32_t TFT_FSMC::ReadID(tft_data_t Reg) {
bool TFT_FSMC::isBusy() {
#ifdef STM32F1xx
volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
#define __IS_DMA_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CCR & DMA_CCR_EN)
#define __IS_DMA_CONFIGURED(__HANDLE__) ((__HANDLE__)->Instance->CPAR != 0)
#elif defined(STM32F4xx)
volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;
#define __IS_DMA_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR & DMA_SxCR_EN)
#define __IS_DMA_CONFIGURED(__HANDLE__) ((__HANDLE__)->Instance->PAR != 0)
#endif
if (dmaEnabled) {
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
Abort();
}
else
Abort();
return dmaEnabled;
if (!__IS_DMA_CONFIGURED(&DMAtx)) return false;
// Check if DMA transfer error or transfer complete flags are set
if ((__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) == 0) && (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) == 0)) return true;
__DSB();
Abort();
return false;
}
void TFT_FSMC::Abort() {
HAL_DMA_Abort(&DMAtx); // Abort DMA transfer if any
HAL_DMA_DeInit(&DMAtx); // Deconfigure DMA
}
void TFT_FSMC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DMAtx.Init.PeriphInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(LCD->RAM), Count);
}
void TFT_FSMC::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DMAtx.Init.PeriphInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
DataTransferBegin();

15
Marlin/src/HAL/STM32/tft/tft_fsmc.h
View File

@ -41,6 +41,7 @@
#define DATASIZE_8BIT SPI_DATASIZE_8BIT
#define DATASIZE_16BIT SPI_DATASIZE_16BIT
#define TFT_IO_DRIVER TFT_FSMC
#define DMA_MAX_SIZE 0xFFFF
#define TFT_DATASIZE TERN(TFT_INTERFACE_FSMC_8BIT, DATASIZE_8BIT, DATASIZE_16BIT)
typedef TERN(TFT_INTERFACE_FSMC_8BIT, uint8_t, uint16_t) tft_data_t;
@ -59,13 +60,14 @@ class TFT_FSMC {
static uint32_t ReadID(tft_data_t Reg);
static void Transmit(tft_data_t Data) { LCD->RAM = Data; __DSB(); }
static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
static void Init();
static uint32_t GetID();
static bool isBusy();
static void Abort() { __HAL_DMA_DISABLE(&DMAtx); }
static void Abort();
static void DataTransferBegin(uint16_t DataWidth = TFT_DATASIZE) {}
static void DataTransferEnd() {};
@ -73,13 +75,14 @@ class TFT_FSMC {
static void WriteData(uint16_t Data) { Transmit(tft_data_t(Data)); }
static void WriteReg(uint16_t Reg) { LCD->REG = tft_data_t(Reg); __DSB(); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
Transmit(DMA_MINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
}
}
};

2
Marlin/src/HAL/STM32/tft/tft_ltdc.cpp
View File

@ -356,7 +356,7 @@ void TFT_LTDC::WriteReg(uint16_t Reg) {
reg = Reg;
}
void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
void TFT_LTDC::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
while (x_cur != x_min && Count) {
Transmit(*Data);

15
Marlin/src/HAL/STM32/tft/tft_ltdc.h
View File

@ -32,6 +32,7 @@
#define DATASIZE_8BIT SPI_DATASIZE_8BIT
#define DATASIZE_16BIT SPI_DATASIZE_16BIT
#define TFT_IO_DRIVER TFT_LTDC
#define DMA_MAX_SIZE 0xFFFF
#define TFT_DATASIZE DATASIZE_16BIT
typedef uint16_t tft_data_t;
@ -49,7 +50,7 @@ class TFT_LTDC {
static void DrawRect(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t color);
static void DrawImage(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *colors);
static void Transmit(tft_data_t Data);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
static void Init();
@ -63,13 +64,15 @@ class TFT_LTDC {
static void WriteData(uint16_t Data);
static void WriteReg(uint16_t Reg);
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
// Non-blocking DMA data transfer is not implemented for LTDC interface
inline static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { WriteSequence(Data, Count); }
inline static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { WriteMultiple(Color, Count); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
Transmit(DMA_PINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
}
}
};

80
Marlin/src/HAL/STM32/tft/tft_spi.cpp
View File

@ -160,16 +160,13 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
for (i = 0; i < 4; i++) {
#if TFT_MISO_PIN != TFT_MOSI_PIN
//if (hspi->Init.Direction == SPI_DIRECTION_2LINES) {
while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) {}
SPIx.Instance->DR = 0;
//}
while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) {}
SPIx.Instance->DR = 0;
#endif
while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_RXNE)) {}
Data = (Data << 8) | SPIx.Instance->DR;
}
__HAL_SPI_DISABLE(&SPIx);
DataTransferEnd();
SPIx.Init.BaudRatePrescaler = BaudRatePrescaler;
@ -180,35 +177,43 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
bool TFT_SPI::isBusy() {
#ifdef STM32F1xx
volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
#define __IS_DMA_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CCR & DMA_CCR_EN)
#define __IS_DMA_CONFIGURED(__HANDLE__) ((__HANDLE__)->Instance->CPAR != 0)
#elif defined(STM32F4xx)
volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;
#define __IS_DMA_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR & DMA_SxCR_EN)
#define __IS_DMA_CONFIGURED(__HANDLE__) ((__HANDLE__)->Instance->PAR != 0)
#endif
if (dmaEnabled) {
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
Abort();
if (!__IS_DMA_CONFIGURED(&DMAtx)) return false;
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx))) {
// You should not be here - DMA transfer error flag is set
// Abort DMA transfer and release SPI
}
else
Abort();
return dmaEnabled;
else {
// Check if DMA transfer completed flag is set
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) == 0) return true;
// Check if SPI transmit butter is empty and SPI is idle
if ((!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) || (__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY))) return true;
}
Abort();
return false;
}
void TFT_SPI::Abort() {
// Wait for any running spi
while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) {}
while ( __HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) {}
// First, abort any running dma
HAL_DMA_Abort(&DMAtx);
// DeInit objects
HAL_DMA_Abort(&DMAtx); // Abort DMA transfer if any
HAL_DMA_DeInit(&DMAtx);
HAL_SPI_DeInit(&SPIx);
// Deselect CS
DataTransferEnd();
CLEAR_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN);
DataTransferEnd(); // Stop SPI and deselect CS
}
void TFT_SPI::Transmit(uint16_t Data) {
if (TFT_MISO_PIN == TFT_MOSI_PIN)
#if TFT_MISO_PIN == TFT_MOSI_PIN
SPI_1LINE_TX(&SPIx);
#endif
__HAL_SPI_ENABLE(&SPIx);
@ -217,14 +222,31 @@ void TFT_SPI::Transmit(uint16_t Data) {
while (!__HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_TXE)) {}
while ( __HAL_SPI_GET_FLAG(&SPIx, SPI_FLAG_BSY)) {}
if (TFT_MISO_PIN != TFT_MOSI_PIN)
__HAL_SPI_CLEAR_OVRFLAG(&SPIx); // Clear overrun flag in 2 Lines communication mode because received is not read
#if TFT_MISO_PIN != TFT_MOSI_PIN
__HAL_SPI_CLEAR_OVRFLAG(&SPIx); // Clear overrun flag in 2 Lines communication mode because received data is not read
#endif
}
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
// Wait last dma finish, to start another
while (isBusy()) { /* nada */ }
DMAtx.Init.MemInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
#if TFT_MISO_PIN == TFT_MOSI_PIN
SPI_1LINE_TX(&SPIx);
#endif
DataTransferBegin();
HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(SPIx.Instance->DR), Count);
__HAL_SPI_ENABLE(&SPIx);
SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); // Enable Tx DMA Request
TERN_(TFT_SHARED_SPI, while (isBusy()));
}
void TFT_SPI::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DMAtx.Init.MemInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
@ -243,7 +265,6 @@ void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Coun
}
#if ENABLED(USE_SPI_DMA_TC)
void TFT_SPI::TransmitDMA_IT(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DMAtx.Init.MemInc = MemoryIncrease;
@ -262,8 +283,7 @@ void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Coun
SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); // Enable Tx DMA Request
}
extern "C" void DMA2_Stream3_IRQHandler(void) { HAL_DMA_IRQHandler(&TFT_SPI::DMAtx); }
extern "C" void DMA2_Stream3_IRQHandler(void) { TFT_SPI::DMA_IRQHandler(); }
#endif
#endif // HAS_SPI_TFT

19
Marlin/src/HAL/STM32/tft/tft_spi.h
View File

@ -39,46 +39,47 @@
#define DATASIZE_8BIT SPI_DATASIZE_8BIT
#define DATASIZE_16BIT SPI_DATASIZE_16BIT
#define TFT_IO_DRIVER TFT_SPI
#define DMA_MAX_SIZE 0xFFFF
class TFT_SPI {
private:
static SPI_HandleTypeDef SPIx;
static DMA_HandleTypeDef DMAtx;
static uint32_t ReadID(uint16_t Reg);
static void Transmit(uint16_t Data);
static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
#if ENABLED(USE_SPI_DMA_TC)
static void TransmitDMA_IT(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
#endif
public:
static DMA_HandleTypeDef DMAtx;
static void Init();
static uint32_t GetID();
static bool isBusy();
static void Abort();
static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT);
static void DataTransferEnd() { WRITE(TFT_CS_PIN, HIGH); };
static void DataTransferEnd() { WRITE(TFT_CS_PIN, HIGH); __HAL_SPI_DISABLE(&SPIx); };
static void DataTransferAbort();
static void WriteData(uint16_t Data) { Transmit(Data); }
static void WriteReg(uint16_t Reg) { WRITE(TFT_A0_PIN, LOW); Transmit(Reg); WRITE(TFT_A0_PIN, HIGH); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
#if ENABLED(USE_SPI_DMA_TC)
static void WriteSequenceIT(uint16_t *Data, uint16_t Count) { TransmitDMA_IT(DMA_MINC_ENABLE, Data, Count); }
inline static void DMA_IRQHandler() { HAL_DMA_IRQHandler(&TFT_SPI::DMAtx); }
#endif
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
Transmit(DMA_MINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
}
}
};

66
Marlin/src/HAL/STM32F1/SPI.cpp
View File

@ -526,23 +526,22 @@ void SPIClass::onReceive(void(*callback)()) {
_currentSetting->receiveCallback = callback;
if (callback) {
switch (_currentSetting->spi_d->clk_id) {
#if BOARD_NR_SPI >= 1
case RCC_SPI1:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi1EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 2
case RCC_SPI2:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi2EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 3
case RCC_SPI3:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi3EventCallback);
break;
#endif
default:
ASSERT(0);
#if BOARD_NR_SPI >= 1
case RCC_SPI1:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi1EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 2
case RCC_SPI2:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi2EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 3
case RCC_SPI3:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi3EventCallback);
break;
#endif
default: ASSERT(0);
}
}
else {
@ -554,23 +553,22 @@ void SPIClass::onTransmit(void(*callback)()) {
_currentSetting->transmitCallback = callback;
if (callback) {
switch (_currentSetting->spi_d->clk_id) {
#if BOARD_NR_SPI >= 1
case RCC_SPI1:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi1EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 2
case RCC_SPI2:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi2EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 3
case RCC_SPI3:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi3EventCallback);
break;
#endif
default:
ASSERT(0);
#if BOARD_NR_SPI >= 1
case RCC_SPI1:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi1EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 2
case RCC_SPI2:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi2EventCallback);
break;
#endif
#if BOARD_NR_SPI >= 3
case RCC_SPI3:
dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi3EventCallback);
break;
#endif
default: ASSERT(0);
}
}
else {

9
Marlin/src/HAL/STM32F1/SPI.h
View File

@ -33,6 +33,15 @@
#include <stdint.h>
#include <wirish.h>
// Number of SPI ports
#ifdef BOARD_SPI3_SCK_PIN
#define BOARD_NR_SPI 3
#elif defined(BOARD_SPI2_SCK_PIN)
#define BOARD_NR_SPI 2
#elif defined(BOARD_SPI1_SCK_PIN)
#define BOARD_NR_SPI 1
#endif
// SPI_HAS_TRANSACTION means SPI has
// - beginTransaction()
// - endTransaction()

29
Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp
View File

@ -215,22 +215,47 @@ uint32_t TFT_FSMC::GetID() {
}
bool TFT_FSMC::isBusy() {
#define __IS_DMA_CONFIGURED(__DMAx__, __CHx__) (dma_channel_regs(__DMAx__, __CHx__)->CPAR != 0)
if (!__IS_DMA_CONFIGURED(FSMC_DMA_DEV, FSMC_DMA_CHANNEL)) return false;
// Check if DMA transfer error or transfer complete flags are set
if ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & (DMA_ISR_TCIF | DMA_ISR_TEIF)) == 0) return true;
__DSB();
Abort();
return false;
}
void TFT_FSMC::Abort() {
dma_channel_reg_map *channel_regs = dma_channel_regs(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL); // Abort DMA transfer if any
// Deconfigure DMA
channel_regs->CCR = 0U;
channel_regs->CNDTR = 0U;
channel_regs->CMAR = 0U;
channel_regs->CPAR = 0U;
}
void TFT_FSMC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
// TODO: HAL STM32 uses DMA2_Channel1 for FSMC on STM32F1
dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, Data, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM | MemoryIncrease);
dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, Count);
dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
}
void TFT_FSMC::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
#if defined(FSMC_DMA_DEV) && defined(FSMC_DMA_CHANNEL)
dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, Data, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM | MemoryIncrease);
dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, Count);
dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {};
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & (DMA_CCR_TEIE | DMA_CCR_TCIE)) == 0) {}
Abort();
#endif
}

16
Marlin/src/HAL/STM32F1/tft/tft_fsmc.h
View File

@ -33,6 +33,10 @@
#define DATASIZE_8BIT DMA_SIZE_8BITS
#define DATASIZE_16BIT DMA_SIZE_16BITS
#define TFT_IO_DRIVER TFT_FSMC
#define DMA_MAX_SIZE 0xFFFF
#define DMA_PINC_ENABLE DMA_PINC_MODE
#define DMA_PINC_DISABLE 0
typedef struct {
__IO uint16_t REG;
@ -45,6 +49,7 @@ class TFT_FSMC {
static uint32_t ReadID(uint16_t Reg);
static void Transmit(uint16_t Data);
static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
@ -59,13 +64,14 @@ class TFT_FSMC {
static void WriteData(uint16_t Data) { Transmit(Data); }
static void WriteReg(uint16_t Reg);
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_MODE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_CIRC_MODE, &Data, Count); }
static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_CIRC_MODE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
Transmit(DMA_PINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
}
}
};

52
Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
View File

@ -26,7 +26,7 @@
#include "tft_spi.h"
SPIClass TFT_SPI::SPIx(1);
SPIClass TFT_SPI::SPIx(TFT_SPI_DEVICE);
void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET)
@ -46,7 +46,7 @@ void TFT_SPI::Init() {
* STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
*/
#if SPI_DEVICE == 1
#if TFT_SPI_DEVICE == 1
#define SPI_CLOCK_MAX SPI_CLOCK_DIV4
#else
#define SPI_CLOCK_MAX SPI_CLOCK_DIV2
@ -62,7 +62,7 @@ void TFT_SPI::Init() {
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
SPIx.setModule(1);
SPIx.setModule(TFT_SPI_DEVICE);
SPIx.setClockDivider(clock);
SPIx.setBitOrder(MSBFIRST);
SPIx.setDataMode(SPI_MODE0);
@ -71,7 +71,7 @@ void TFT_SPI::Init() {
void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
SPIx.setDataSize(DataSize);
SPIx.begin();
OUT_WRITE(TFT_CS_PIN, LOW);
WRITE(TFT_CS_PIN, LOW);
}
#ifdef TFT_DEFAULT_DRIVER
@ -113,15 +113,53 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
#endif
}
bool TFT_SPI::isBusy() { return false; }
bool TFT_SPI::isBusy() {
#define __IS_DMA_CONFIGURED(__DMAx__, __CHx__) (dma_channel_regs(__DMAx__, __CHx__)->CPAR != 0)
void TFT_SPI::Abort() { DataTransferEnd(); }
if (!__IS_DMA_CONFIGURED(DMAx, DMA_CHx)) return false;
if (dma_get_isr_bits(DMAx, DMA_CHx) & DMA_ISR_TEIF) {
// You should not be here - DMA transfer error flag is set
// Abort DMA transfer and release SPI
}
else {
// Check if DMA transfer completed flag is set
if (!(dma_get_isr_bits(DMAx, DMA_CHx) & DMA_ISR_TCIF)) return true;
// Check if SPI TX butter is empty and SPI is idle
if (!(SPIdev->regs->SR & SPI_SR_TXE) || (SPIdev->regs->SR & SPI_SR_BSY)) return true;
}
Abort();
return false;
}
void TFT_SPI::Abort() {
dma_channel_reg_map *channel_regs = dma_channel_regs(DMAx, DMA_CHx);
dma_disable(DMAx, DMA_CHx); // Abort DMA transfer if any
spi_tx_dma_disable(SPIdev);
// Deconfigure DMA
channel_regs->CCR = 0U;
channel_regs->CNDTR = 0U;
channel_regs->CMAR = 0U;
channel_regs->CPAR = 0U;
DataTransferEnd();
}
void TFT_SPI::Transmit(uint16_t Data) { SPIx.send(Data); }
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin();
OUT_WRITE(TFT_DC_PIN, HIGH);
SPIx.dmaSendAsync(Data, Count, MemoryIncrease == DMA_MINC_ENABLE);
TERN_(TFT_SHARED_SPI, while (isBusy()));
}
void TFT_SPI::Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
WRITE(TFT_DC_PIN, HIGH);
DataTransferBegin();
SPIx.dmaSend(Data, Count, MemoryIncrease == DMA_MINC_ENABLE);
DataTransferEnd();
}

46
Marlin/src/HAL/STM32F1/tft/tft_spi.h
View File

@ -25,6 +25,27 @@
#include <SPI.h>
#define IS_SPI(N) (BOARD_NR_SPI >= N && (TFT_SCK_PIN == BOARD_SPI##N##_SCK_PIN) && (TFT_MOSI_PIN == BOARD_SPI##N##_MOSI_PIN) && (TFT_MISO_PIN == BOARD_SPI##N##_MISO_PIN))
#if IS_SPI(1)
#define TFT_SPI_DEVICE 1
#define SPIdev SPI1
#define DMAx DMA1
#define DMA_CHx DMA_CH3
#elif IS_SPI(2)
#define TFT_SPI_DEVICE 2
#define SPIdev SPI2
#define DMAx DMA1
#define DMA_CHx DMA_CH5
#elif IS_SPI(3)
#define TFT_SPI_DEVICE 3
#define SPIdev SPI3
#define DMAx DMA2
#define DMA_CHx DMA_CH2
#else
#error "Invalid TFT SPI configuration."
#endif
#undef IS_SPI
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
@ -32,17 +53,19 @@
#define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341)
#endif
#define DATASIZE_8BIT DATA_SIZE_8BIT
#define DATASIZE_16BIT DATA_SIZE_16BIT
#define TFT_IO_DRIVER TFT_SPI
#define DATASIZE_8BIT DATA_SIZE_8BIT
#define DATASIZE_16BIT DATA_SIZE_16BIT
#define TFT_IO_DRIVER TFT_SPI
#define DMA_MAX_SIZE 0xFFFF
#define DMA_MINC_ENABLE 1
#define DMA_MINC_DISABLE 0
#define DMA_MINC_ENABLE DMA_MINC_MODE
#define DMA_MINC_DISABLE 0
class TFT_SPI {
private:
static uint32_t ReadID(uint16_t Reg);
static void Transmit(uint16_t Data);
static void Transmit(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
@ -58,15 +81,16 @@ public:
static void DataTransferAbort();
static void WriteData(uint16_t Data) { Transmit(Data); }
static void WriteReg(uint16_t Reg) { WRITE(TFT_A0_PIN, LOW); Transmit(Reg); WRITE(TFT_A0_PIN, HIGH); }
static void WriteReg(uint16_t Reg) { WRITE(TFT_DC_PIN, LOW); Transmit(Reg); WRITE(TFT_DC_PIN, HIGH); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
static void WriteSequence_DMA(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple_DMA(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { Transmit(DMA_MINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
Transmit(DMA_MINC_DISABLE, &Color, Count > DMA_MAX_SIZE ? DMA_MAX_SIZE : Count);
Count = Count > DMA_MAX_SIZE ? Count - DMA_MAX_SIZE : 0;
}
}
};

8
Marlin/src/lcd/tft/tft.h
View File

@ -65,9 +65,9 @@
#endif
#endif
#if TFT_BUFFER_SIZE > 65535
#if TFT_BUFFER_SIZE > DMA_MAX_SIZE
// DMA Count parameter is uint16_t
#error "TFT_BUFFER_SIZE can not exceed 65535"
#error "TFT_BUFFER_SIZE can not exceed DMA_MAX_SIZE"
#endif
class TFT {
@ -86,8 +86,8 @@ class TFT {
static bool is_busy() { return io.isBusy(); }
static void abort() { io.Abort(); }
static void write_multiple(uint16_t Data, uint16_t Count) { io.WriteMultiple(Data, Count); }
static void write_sequence(uint16_t *Data, uint16_t Count) { io.WriteSequence(Data, Count); }
static void write_multiple(uint16_t Data, uint16_t Count) { io.WriteMultipleDMA(Data, Count); }
static void write_sequence(uint16_t *Data, uint16_t Count) { io.WriteSequenceDMA(Data, Count); }
static void set_window(uint16_t Xmin, uint16_t Ymin, uint16_t Xmax, uint16_t Ymax) { io.set_window(Xmin, Ymin, Xmax, Ymax); }
static void fill(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color) { queue.fill(x, y, width, height, color); }

6
Marlin/src/lcd/tft/tft_queue.cpp
View File

@ -86,9 +86,9 @@ void TFT_Queue::fill(queueTask_t *task) {
task->state = TASK_STATE_IN_PROGRESS;
}
if (task_parameters->count > 65535) {
count = 65535;
task_parameters->count -= 65535;
if (task_parameters->count > DMA_MAX_SIZE) {
count = DMA_MAX_SIZE;
task_parameters->count -= DMA_MAX_SIZE;
}
else {
count = task_parameters->count;

1
Marlin/src/lcd/tft/tft_queue.h
View File

@ -135,6 +135,7 @@ class TFT_Queue {
static void reset();
static void async();
static void sync() { while (current_task != nullptr) async(); }
static bool is_empty() { return current_task == nullptr; }
static void fill(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color);
static void canvas(uint16_t x, uint16_t y, uint16_t width, uint16_t height);

8
Marlin/src/lcd/tft/ui_1024x600.cpp
View File

@ -57,7 +57,8 @@ void MarlinUI::tft_idle() {
#endif
tft.queue.async();
TERN_(TOUCH_SCREEN, touch.idle());
TERN_(TOUCH_SCREEN, if (tft.queue.is_empty()) touch.idle()); // Touch driver is not DMA-aware, so only check for touch controls after screen drawing is completed
}
#if ENABLED(SHOW_BOOTSCREEN)
@ -325,7 +326,10 @@ void MarlinUI::draw_status_screen() {
#if ENABLED(TOUCH_SCREEN)
add_control(900, y, menu_main, imgSettings);
TERN_(SDSUPPORT, add_control(12, y, menu_media, imgSD, !printingIsActive(), COLOR_CONTROL_ENABLED, card.isMounted() && printingIsActive() ? COLOR_BUSY : COLOR_CONTROL_DISABLED));
#if ENABLED(SDSUPPORT)
const bool cm = card.isMounted(), pa = printingIsActive();
add_control(12, y, menu_media, imgSD, cm && !pa, COLOR_CONTROL_ENABLED, cm && pa ? COLOR_BUSY : COLOR_CONTROL_DISABLED);
#endif
#endif
y += 100;

8
Marlin/src/lcd/tft/ui_320x240.cpp
View File

@ -57,7 +57,8 @@ void MarlinUI::tft_idle() {
#endif
tft.queue.async();
TERN_(TOUCH_SCREEN, touch.idle());
TERN_(TOUCH_SCREEN, if (tft.queue.is_empty()) touch.idle()); // Touch driver is not DMA-aware, so only check for touch controls after screen drawing is completed
}
#if ENABLED(SHOW_BOOTSCREEN)
@ -342,7 +343,10 @@ void MarlinUI::draw_status_screen() {
#if ENABLED(TOUCH_SCREEN)
add_control(256, 130, menu_main, imgSettings);
TERN_(SDSUPPORT, add_control(0, 130, menu_media, imgSD, !printingIsActive(), COLOR_CONTROL_ENABLED, card.isMounted() && printingIsActive() ? COLOR_BUSY : COLOR_CONTROL_DISABLED));
#if ENABLED(SDSUPPORT)
const bool cm = card.isMounted(), pa = printingIsActive();
add_control(0, 130, menu_media, imgSD, cm && !pa, COLOR_CONTROL_ENABLED, cm && pa ? COLOR_BUSY : COLOR_CONTROL_DISABLED);
#endif
#endif
}

8
Marlin/src/lcd/tft/ui_480x320.cpp
View File

@ -57,7 +57,8 @@ void MarlinUI::tft_idle() {
#endif
tft.queue.async();
TERN_(TOUCH_SCREEN, touch.idle());
TERN_(TOUCH_SCREEN, if (tft.queue.is_empty()) touch.idle()); // Touch driver is not DMA-aware, so only check for touch controls after screen drawing is completed
}
#if ENABLED(SHOW_BOOTSCREEN)
@ -319,7 +320,10 @@ void MarlinUI::draw_status_screen() {
#if ENABLED(TOUCH_SCREEN)
add_control(404, y, menu_main, imgSettings);
TERN_(SDSUPPORT, add_control(12, y, menu_media, imgSD, !printingIsActive(), COLOR_CONTROL_ENABLED, card.isMounted() && printingIsActive() ? COLOR_BUSY : COLOR_CONTROL_DISABLED));
#if ENABLED(SDSUPPORT)
const bool cm = card.isMounted(), pa = printingIsActive();
add_control(12, y, menu_media, imgSD, cm && !pa, COLOR_CONTROL_ENABLED, cm && pa ? COLOR_BUSY : COLOR_CONTROL_DISABLED);
#endif
#endif
y += TERN(HAS_UI_480x272, 36, 44);

4
Marlin/src/lcd/tft_io/tft_io.cpp
View File

@ -60,7 +60,7 @@ TFT_IO_DRIVER TFT_IO::io;
uint32_t TFT_IO::lcd_id = 0xFFFFFFFF;
void TFT_IO::InitTFT() {
if (lcd_id != 0xFFFFFFFF) return;
if (lcd_id != 0xFFFFFFFF) return;
#if PIN_EXISTS(TFT_BACKLIGHT)
OUT_WRITE(TFT_BACKLIGHT_PIN, LOW);
@ -243,7 +243,7 @@ void TFT_IO::write_esc_sequence(const uint16_t *Sequence) {
continue;
}
data = *Sequence++;
if (data == 0x7FFF) return;
if (data == 0x7FFF) break;
if (data == 0xFFFF)
io.WriteData(0xFFFF);
else if (data & 0x8000)

38
Marlin/src/lcd/tft_io/tft_io.h
View File

@ -30,7 +30,11 @@
#elif HAS_LTDC_TFT
#include HAL_PATH(../../HAL, tft/tft_ltdc.h)
#else
#error "TFT IO only supports SPI, FSMC or LTDC interface"
#error "TFT IO only supports SPI, FSMC or LTDC interface."
#endif
#ifndef DMA_MAX_SIZE
#error "MAX_DMA_SIZE is not configured for this platform."
#endif
#define TFT_EXCHANGE_XY _BV32(1)
@ -108,27 +112,33 @@ public:
static void write_esc_sequence(const uint16_t *Sequence);
// Deletaged methods
inline static void Init() { io.Init(); io.Abort(); };
inline static bool isBusy() { return io.isBusy(); };
inline static void Abort() { io.Abort(); };
inline static uint32_t GetID() { return io.GetID(); };
inline static void Init() { io.Init(); }
inline static bool isBusy() { return io.isBusy(); }
inline static void Abort() { io.Abort(); }
inline static uint32_t GetID() { return io.GetID(); }
inline static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT) { io.DataTransferBegin(DataWidth); }
inline static void DataTransferEnd() { io.DataTransferEnd(); };
// inline static void DataTransferAbort() { io.DataTransferAbort(); };
inline static void DataTransferEnd() { io.DataTransferEnd(); }
inline static void WriteData(uint16_t Data) { io.WriteData(Data); };
inline static void WriteReg(uint16_t Reg) { io.WriteReg(Reg); };
inline static void WriteData(uint16_t Data) { io.WriteData(Data); }
inline static void WriteReg(uint16_t Reg) { io.WriteReg(Reg); }
inline static void WriteSequence(uint16_t *Data, uint16_t Count) { io.WriteSequence(Data, Count); };
// Blocking IO used by TFT_CLASSIC_UI and TFT_LVGL_UI
// These functions start data transfer and WAIT for data transfer completion
inline static void WriteSequence(uint16_t *Data, uint16_t Count) { io.WriteSequence(Data, Count); }
inline static void WriteMultiple(uint16_t Color, uint32_t Count) { io.WriteMultiple(Color, Count); }
// Non-blocking DMA-based IO used by TFT_COLOR_UI only
// These functions start data transfer using DMA and do NOT wait for data transfer completion
inline static void WriteSequenceDMA(uint16_t *Data, uint16_t Count) { io.WriteSequence_DMA(Data, Count); }
inline static void WriteMultipleDMA(uint16_t Color, uint16_t Count) { io.WriteMultiple_DMA(Color, Count); }
// Non-blocking DMA-based IO with IRQ callback used by TFT_LVGL_UI only
// This function starts data transfer using DMA and does NOT wait for data transfer completion
#if ENABLED(USE_SPI_DMA_TC)
inline static void WriteSequenceIT(uint16_t *Data, uint16_t Count) { io.WriteSequenceIT(Data, Count); };
inline static void WriteSequenceIT(uint16_t *Data, uint16_t Count) { io.WriteSequenceIT(Data, Count); }
#endif
// static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
inline static void WriteMultiple(uint16_t Color, uint32_t Count) { io.WriteMultiple(Color, Count); };
protected:
static uint32_t lcd_id;
};

3
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View File

@ -323,6 +323,9 @@
#define BTN_EN1 EXP2_03_PIN
#define BTN_ENC EXP1_02_PIN
#define BEEPER_PIN EXP1_01_PIN
#define SDCARD_CONNECTION ONBOARD
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1

35
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
View File

@ -140,7 +140,38 @@
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#if EITHER(TFT_COLOR_UI, TFT_CLASSIC_UI)
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define TFT_CS_PIN EXP1_07_PIN
#define TFT_SCK_PIN EXP2_02_PIN
#define TFT_MISO_PIN EXP2_01_PIN
#define TFT_MOSI_PIN EXP2_06_PIN
#define TFT_DC_PIN EXP1_08_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_04_PIN
#define LCD_BACKLIGHT_PIN EXP1_03_PIN
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 3
#define TOUCH_CS_PIN EXP1_05_PIN // SPI3_NSS
#define TOUCH_SCK_PIN EXP2_02_PIN // SPI3_SCK
#define TOUCH_MISO_PIN EXP2_01_PIN // SPI3_MISO
#define TOUCH_MOSI_PIN EXP2_06_PIN // SPI3_MOSI
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 9600
#elif HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
@ -253,5 +284,7 @@
#define SD_MOSI_PIN PA7
#define SD_SS_PIN PA4
#endif
#define ONBOARD_SPI_DEVICE 1 // SPI1
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
#define SDSS SD_SS_PIN

2
buildroot/share/PlatformIO/variants/marlin_maple_CHITU_F103/board/board.h
View File

@ -63,7 +63,6 @@
* SPI3 is unusable due to pin 43 (PB4) and NRST tie-together :(, but
* leave the definitions so as not to clutter things up. This is only
* OK since RET6 Ed. is specifically advertised as a beta board. */
#define BOARD_NR_SPI 3
#define BOARD_SPI1_NSS_PIN PA4
#define BOARD_SPI1_SCK_PIN PA5
#define BOARD_SPI1_MISO_PIN PA6
@ -79,7 +78,6 @@
#define BOARD_SPI3_MISO_PIN PB4
#define BOARD_SPI3_MOSI_PIN PB5
/* GPIO A to E = 5 * 16 - BOOT1 not used = 79*/
#define BOARD_NR_GPIO_PINS 112
/* Note: NOT 19. The missing one is D38 a.k.a. BOARD_BUTTON_PIN, which

5
buildroot/share/PlatformIO/variants/marlin_maple_MEEB_3DP/board/board.h
View File

@ -63,26 +63,21 @@
* SPI3 is unusable due to pin 43 (PB4) and NRST tie-together :(, but
* leave the definitions so as not to clutter things up. This is only
* OK since RET6 Ed. is specifically advertised as a beta board. */
#define BOARD_NR_SPI 3
#define BOARD_SPI1_NSS_PIN PA4
#define BOARD_SPI1_SCK_PIN PA5
#define BOARD_SPI1_MISO_PIN PA6
#define BOARD_SPI1_MOSI_PIN PA7
#define BOARD_SPI2_NSS_PIN PB12
#define BOARD_SPI2_SCK_PIN PB13
#define BOARD_SPI2_MISO_PIN PB14
#define BOARD_SPI2_MOSI_PIN PB15
#define BOARD_SPI3_NSS_PIN PA15
#define BOARD_SPI3_SCK_PIN PB3
#define BOARD_SPI3_MISO_PIN PB4
#define BOARD_SPI3_MOSI_PIN PB5
/* GPIO A to E = 5 * 16 - BOOT1 not used = 79*/
#define BOARD_NR_GPIO_PINS 51
/* Note: NOT 19. The missing one is D38 a.k.a. BOARD_BUTTON_PIN, which

20
ini/stm32f1-maple.ini
View File

@ -217,21 +217,21 @@ build_flags = ${STM32F1_maple.build_flags} -DMCU_STM32F103VE -DSS_TIMER
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin_maple]
extends = STM32F1_maple
board = genericSTM32F103ZE
board_build.address = 0x08007000
board_build.rename = Robin.bin
board_build.ldscript = mks_robin.ld
build_flags = ${STM32F1_maple.build_flags} -DSS_TIMER=4 -DSTM32_XL_DENSITY
extends = STM32F1_maple
board = genericSTM32F103ZE
board_build.address = 0x08007000
board_build.encrypt_mks = Robin.bin
board_build.ldscript = mks_robin.ld
build_flags = ${STM32F1_maple.build_flags} -DSS_TIMER=4 -DSTM32_XL_DENSITY
#
# MKS Robin Pro (STM32F103ZET6)
#
[env:mks_robin_pro_maple]
extends = env:mks_robin_maple
board_build.address = 0x08007000
board_build.rename = Robin_pro.bin
board_build.ldscript = mks_robin_pro.ld
extends = env:mks_robin_maple
board_build.address = 0x08007000
board_build.encrypt_mks = Robin_pro.bin
board_build.ldscript = mks_robin_pro.ld
#
# TRIGORILLA PRO (STM32F103ZET6)