From edac64e7d2a54a201e6d819263b8b2b2d317800a Mon Sep 17 00:00:00 2001 From: wgm4321 Date: Sun, 28 Dec 2014 20:43:14 -0500 Subject: [PATCH] Add Filament menu and add Filament/Retract settings to config store. --- Marlin/ConfigurationStore.cpp | 124 ++++++++++++++++-- Marlin/Marlin.h | 4 + Marlin/Marlin_main.cpp | 78 ++++++++--- Marlin/language_en.h | 5 + Marlin/ultralcd.cpp | 45 ++++++- Marlin/ultralcd.h | 1 + .../ultralcd_implementation_hitachi_HD44780.h | 4 + 7 files changed, 232 insertions(+), 29 deletions(-) diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp index 20e68d09e3..0b3e485503 100644 --- a/Marlin/ConfigurationStore.cpp +++ b/Marlin/ConfigurationStore.cpp @@ -38,15 +38,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) // wrong data being written to the variables. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order. -#define EEPROM_VERSION "V10" -#ifdef DELTA - #undef EEPROM_VERSION - #define EEPROM_VERSION "V11" -#endif -#ifdef SCARA - #undef EEPROM_VERSION - #define EEPROM_VERSION "V12" -#endif +#define EEPROM_VERSION "V13" #ifdef EEPROM_SETTINGS void Config_StoreSettings() @@ -101,6 +93,31 @@ void Config_StoreSettings() #ifdef SCARA EEPROM_WRITE_VAR(i,axis_scaling); // Add scaling for SCARA #endif + #ifdef FWRETRACT + EEPROM_WRITE_VAR(i,autoretract_enabled); + EEPROM_WRITE_VAR(i,retract_length); + #if EXTRUDERS > 1 + EEPROM_WRITE_VAR(i,retract_length_swap); + #endif + EEPROM_WRITE_VAR(i,retract_feedrate); + EEPROM_WRITE_VAR(i,retract_zlift); + EEPROM_WRITE_VAR(i,retract_recover_length); + #if EXTRUDERS > 1 + EEPROM_WRITE_VAR(i,retract_recover_length_swap); + #endif + EEPROM_WRITE_VAR(i,retract_recover_feedrate); + #endif + + // Save filament sizes + EEPROM_WRITE_VAR(i, volumetric_enabled); + EEPROM_WRITE_VAR(i, filament_size[0]); + #if EXTRUDERS > 1 + EEPROM_WRITE_VAR(i, filament_size[1]); + #if EXTRUDERS > 2 + EEPROM_WRITE_VAR(i, filament_size[2]); + #endif + #endif + char ver2[4]=EEPROM_VERSION; i=EEPROM_OFFSET; EEPROM_WRITE_VAR(i,ver2); // validate data @@ -210,12 +227,46 @@ SERIAL_ECHOLNPGM("Scaling factors:"); SERIAL_ECHO_START; SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)"); SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M208 S",retract_recover_length); - SERIAL_ECHOPAIR(" F" ,retract_recover_feedrate*60); - SERIAL_ECHOLN(""); + SERIAL_ECHOPAIR(" M208 S",retract_recover_length); + SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0)); + SERIAL_ECHOLN(""); +#if EXTRUDERS > 1 + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Multi-extruder settings:"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" Swap retract length (mm): ", retract_length_swap); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" Swap rec. addl. length (mm): ", retract_recover_length_swap); + SERIAL_ECHOLN(""); #endif + SERIAL_ECHO_START; + if (volumetric_enabled) { + SERIAL_ECHOLNPGM("Filament settings:"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M200 D", filament_size[0]); + SERIAL_ECHOLN(""); +#if EXTRUDERS > 1 + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); + SERIAL_ECHOLN(""); +#if EXTRUDERS > 2 + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); + SERIAL_ECHOLN(""); +#endif +#endif + } else { + SERIAL_ECHOLNPGM("Filament settings: Disabled"); + } } #endif +#endif #ifdef EEPROM_SETTINGS @@ -277,6 +328,30 @@ void Config_RetrieveSettings() EEPROM_READ_VAR(i,axis_scaling); #endif + #ifdef FWRETRACT + EEPROM_READ_VAR(i,autoretract_enabled); + EEPROM_READ_VAR(i,retract_length); + #if EXTRUDERS > 1 + EEPROM_READ_VAR(i,retract_length_swap); + #endif + EEPROM_READ_VAR(i,retract_feedrate); + EEPROM_READ_VAR(i,retract_zlift); + EEPROM_READ_VAR(i,retract_recover_length); + #if EXTRUDERS > 1 + EEPROM_READ_VAR(i,retract_recover_length_swap); + #endif + EEPROM_READ_VAR(i,retract_recover_feedrate); + #endif + + EEPROM_READ_VAR(i, volumetric_enabled); + EEPROM_READ_VAR(i, filament_size[0]); +#if EXTRUDERS > 1 + EEPROM_READ_VAR(i, filament_size[1]); +#if EXTRUDERS > 2 + EEPROM_READ_VAR(i, filament_size[2]); +#endif +#endif + calculate_volumetric_multipliers(); // Call updatePID (similar to when we have processed M301) updatePID(); SERIAL_ECHO_START; @@ -353,6 +428,31 @@ void Config_ResetDefault() #endif//PID_ADD_EXTRUSION_RATE #endif//PIDTEMP +#ifdef FWRETRACT + autoretract_enabled = false; + retract_length = RETRACT_LENGTH; +#if EXTRUDERS > 1 + retract_length_swap = RETRACT_LENGTH_SWAP; +#endif + retract_feedrate = RETRACT_FEEDRATE; + retract_zlift = RETRACT_ZLIFT; + retract_recover_length = RETRACT_RECOVER_LENGTH; +#if EXTRUDERS > 1 + retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; +#endif + retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE; +#endif + + volumetric_enabled = false; + filament_size[0] = DEFAULT_NOMINAL_FILAMENT_DIA; +#if EXTRUDERS > 1 + filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA; +#if EXTRUDERS > 2 + filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA; +#endif +#endif + calculate_volumetric_multipliers(); + SERIAL_ECHO_START; SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded"); diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 76b348e774..d8012976c4 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -209,7 +209,9 @@ extern float homing_feedrate[]; extern bool axis_relative_modes[]; extern int feedmultiply; extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all extruders +extern bool volumetric_enabled; extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually +extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder. extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner extern float current_position[NUM_AXIS] ; extern float add_homing[3]; @@ -266,3 +268,5 @@ extern void digipot_i2c_init(); #endif #endif + +extern void calculate_volumetric_multipliers(); \ No newline at end of file diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index ef3cda04c9..e3e5ef3588 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -215,6 +215,15 @@ int extruder_multiply[EXTRUDERS] = {100 #endif #endif }; +bool volumetric_enabled = false; +float filament_size[EXTRUDERS] = { DEFAULT_NOMINAL_FILAMENT_DIA + #if EXTRUDERS > 1 + , DEFAULT_NOMINAL_FILAMENT_DIA + #if EXTRUDERS > 2 + , DEFAULT_NOMINAL_FILAMENT_DIA + #endif + #endif +}; float volumetric_multiplier[EXTRUDERS] = {1.0 #if EXTRUDERS > 1 , 1.0 @@ -2823,21 +2832,7 @@ Sigma_Exit: #endif //BLINKM case 200: // M200 D set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). { - float area = .0; - float radius = .0; - if(code_seen('D')) { - radius = (float)code_value() * .5; - if(radius == 0) { - area = 1; - } else { - area = M_PI * pow(radius, 2); - } - } else { - //reserved for setting filament diameter via UFID or filament measuring device - break; - - - } + tmp_extruder = active_extruder; if(code_seen('T')) { tmp_extruder = code_value(); @@ -2847,7 +2842,32 @@ Sigma_Exit: break; } } - volumetric_multiplier[tmp_extruder] = 1 / area; + + float area = .0; + if(code_seen('D')) { + float diameter = (float)code_value(); + if (diameter == 0.0) { + // setting any extruder filament size disables volumetric on the assumption that + // slicers either generate in extruder values as cubic mm or as as filament feeds + // for all extruders + volumetric_enabled = false; + } else { + filament_size[tmp_extruder] = (float)code_value(); + // make sure all extruders have some sane value for the filament size + filament_size[0] = (filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[0]); + #if EXTRUDERS > 1 + filament_size[1] = (filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[1]); + #if EXTRUDERS > 2 + filament_size[2] = (filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[2]); + #endif + #endif + volumetric_enabled = true; + } + } else { + //reserved for setting filament diameter via UFID or filament measuring device + break; + } + calculate_volumetric_multipliers(); } break; case 201: // M201 @@ -4580,3 +4600,29 @@ bool setTargetedHotend(int code){ return false; } + +float calculate_volumetric_multiplier(float diameter) { + float area = .0; + float radius = .0; + + radius = diameter * .5; + if (! volumetric_enabled || radius == 0) { + area = 1; + } + else { + area = M_PI * pow(radius, 2); + } + + return 1.0 / area; +} + +void calculate_volumetric_multipliers() { + volumetric_multiplier[0] = calculate_volumetric_multiplier(filament_size[0]); +#if EXTRUDERS > 1 + volumetric_multiplier[1] = calculate_volumetric_multiplier(filament_size[1]); +#if EXTRUDERS > 2 + volumetric_multiplier[2] = calculate_volumetric_multiplier(filament_size[2]); +#endif +#endif +} + diff --git a/Marlin/language_en.h b/Marlin/language_en.h index c749e98254..014b42e51e 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -86,6 +86,11 @@ #define MSG_ESTEPS "Esteps/mm" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Motion" +#define MSG_VOLUMETRIC "Filament" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" +#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" +#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Store memory" #define MSG_LOAD_EPROM "Load memory" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 83895e2fda..42d4979583 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -59,6 +59,7 @@ static void lcd_control_temperature_menu(); static void lcd_control_temperature_preheat_pla_settings_menu(); static void lcd_control_temperature_preheat_abs_settings_menu(); static void lcd_control_motion_menu(); +static void lcd_control_volumetric_menu(); #ifdef DOGLCD static void lcd_set_contrast(); #endif @@ -82,6 +83,7 @@ static void menu_action_setting_edit_bool(const char* pstr, bool* ptr); static void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue); static void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue); +static void menu_action_setting_edit_float43(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue); @@ -90,6 +92,7 @@ static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, static void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_float43(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); @@ -742,6 +745,8 @@ static void lcd_control_menu() MENU_ITEM(back, MSG_MAIN, lcd_main_menu); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); + MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu); + #ifdef DOGLCD // MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast); @@ -870,6 +875,26 @@ static void lcd_control_motion_menu() END_MENU(); } +static void lcd_control_volumetric_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); + + MENU_ITEM_EDIT(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled); + + if (volumetric_enabled) { + MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); +#if EXTRUDERS > 1 + MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); +#if EXTRUDERS > 2 + MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); +#endif +#endif + } + + END_MENU(); +} + #ifdef DOGLCD static void lcd_set_contrast() { @@ -1013,6 +1038,7 @@ void lcd_sdcard_menu() menu_edit_type(int, int3, itostr3, 1) menu_edit_type(float, float3, ftostr3, 1) menu_edit_type(float, float32, ftostr32, 100) +menu_edit_type(float, float43, ftostr43, 1000) menu_edit_type(float, float5, ftostr5, 0.01) menu_edit_type(float, float51, ftostr51, 10) menu_edit_type(float, float52, ftostr52, 100) @@ -1482,7 +1508,24 @@ char *ftostr32(const float &x) return conv; } -// Convert float to string with 1.23 format +// Convert float to string with 1.234 format +char *ftostr43(const float &x) +{ + long xx = x * 1000; + if (xx >= 0) + conv[0] = (xx / 1000) % 10 + '0'; + else + conv[0] = '-'; + xx = abs(xx); + conv[1] = '.'; + conv[2] = (xx / 100) % 10 + '0'; + conv[3] = (xx / 10) % 10 + '0'; + conv[4] = (xx) % 10 + '0'; + conv[5] = 0; + return conv; +} + +//Float to string with 1.23 format char *ftostr12ns(const float &x) { long xx=x*100; diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 351a2654b4..a175f4a757 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -118,6 +118,7 @@ char *ftostr3(const float &x); char *ftostr31ns(const float &x); // float to string without sign character char *ftostr31(const float &x); char *ftostr32(const float &x); +char *ftostr43(const float &x); char *ftostr12ns(const float &x); char *ftostr32sp(const float &x); // remove zero-padding from ftostr32 char *ftostr5(const float &x); diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h index 1a93fe3e6e..fe0953e56c 100644 --- a/Marlin/ultralcd_implementation_hitachi_HD44780.h +++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h @@ -693,6 +693,8 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons #define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data))) #define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data))) #define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data))) +#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data))) #define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) #define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) #define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data))) @@ -711,6 +713,8 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons #define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data))) #define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data))) #define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data))) +#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data))) #define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data))) #define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data))) #define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))