MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

🐛 Fix IJK axis references, E stepper indices (#22176)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Katelyn Schiesser 2021-06-21 13:36:06 -07:00 committed by Scott Lahteine
parent 8050813d32
commit ef41c1f452
9 changed files with 98 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Marlin/src/feature/dac/stepper_dac.cpp
View File

@ -85,10 +85,16 @@ void StepperDAC::print_values() {
if (!dac_present) return; if (!dac_present) return;
SERIAL_ECHO_MSG("Stepper current values in % (Amps):"); SERIAL_ECHO_MSG("Stepper current values in % (Amps):");
SERIAL_ECHO_START(); SERIAL_ECHO_START();
SERIAL_ECHOPAIR_P( SP_X_LBL, dac_perc(X_AXIS), PSTR(" ("), dac_amps(X_AXIS), PSTR(")")); SERIAL_ECHOPAIR_P(SP_X_LBL, dac_perc(X_AXIS), PSTR(" ("), dac_amps(X_AXIS), PSTR(")"));
SERIAL_ECHOPAIR_P( SP_Y_LBL, dac_perc(Y_AXIS), PSTR(" ("), dac_amps(Y_AXIS), PSTR(")")); #if HAS_Y_AXIS
SERIAL_ECHOPAIR_P( SP_Z_LBL, dac_perc(Z_AXIS), PSTR(" ("), dac_amps(Z_AXIS), PSTR(")")); SERIAL_ECHOPAIR_P(SP_Y_LBL, dac_perc(Y_AXIS), PSTR(" ("), dac_amps(Y_AXIS), PSTR(")"));
SERIAL_ECHOLNPAIR_P(SP_E_LBL, dac_perc(E_AXIS), PSTR(" ("), dac_amps(E_AXIS), PSTR(")")); #endif
#if HAS_Z_AXIS
SERIAL_ECHOPAIR_P(SP_Z_LBL, dac_perc(Z_AXIS), PSTR(" ("), dac_amps(Z_AXIS), PSTR(")"));
#endif
#if HAS_EXTRUDERS
SERIAL_ECHOLNPAIR_P(SP_E_LBL, dac_perc(E_AXIS), PSTR(" ("), dac_amps(E_AXIS), PSTR(")"));
#endif
} }
void StepperDAC::commit_eeprom() { void StepperDAC::commit_eeprom() {

55
Marlin/src/gcode/feature/L6470/M906.cpp
View File

@ -32,31 +32,6 @@
#define DEBUG_OUT ENABLED(L6470_CHITCHAT) #define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../../core/debug_out.h" #include "../../../core/debug_out.h"
/**
* M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the
* PWMs to the steppers
*
* On L6474 this sets the TVAL register (same address).
*
* I - select which driver(s) to change on multi-driver axis
* 0 - (default) all drivers on the axis or E0
* 1 - monitor only X, Y, Z or E1
* 2 - monitor only X2, Y2, Z2 or E2
* 3 - monitor only Z3 or E3
* 4 - monitor only Z4 or E4
* 5 - monitor only E5
* Xxxx, Yxxx, Zxxx, Exxx - axis to change (optional)
* L6474 - current in mA (4A max)
* All others - 0-255
*/
/**
* Sets KVAL_HOLD wich affects the current being driven through the stepper.
*
* L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx
* that affects the effective voltage seen by the stepper.
*/
/** /**
* MACRO to fetch information on the items associated with current limiting * MACRO to fetch information on the items associated with current limiting
* and maximum voltage output. * and maximum voltage output.
@ -220,6 +195,28 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
} }
} }
/**
* M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the
* PWMs to the steppers
*
* On L6474 this sets the TVAL register (same address).
*
* I - select which driver(s) to change on multi-driver axis
* 0 - (default) all drivers on the axis or E0
* 1 - monitor only X, Y, Z or E1
* 2 - monitor only X2, Y2, Z2 or E2
* 3 - monitor only Z3 or E3
* 4 - monitor only Z4 or E4
* 5 - monitor only E5
* Xxxx, Yxxx, Zxxx, Exxx - axis to change (optional)
* L6474 - current in mA (4A max)
* All others - 0-255
*
* Sets KVAL_HOLD wich affects the current being driven through the stepper.
*
* L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx
* that affects the effective voltage seen by the stepper.
*/
void GcodeSuite::M906() { void GcodeSuite::M906() {
L64xxManager.pause_monitor(true); // Keep monitor_driver() from stealing status L64xxManager.pause_monitor(true); // Keep monitor_driver() from stealing status
@ -281,11 +278,11 @@ void GcodeSuite::M906() {
break; break;
#endif #endif
#if HAS_EXTRUDERS #if E_STEPPERS
case E_AXIS: { case E_AXIS: {
const int8_t target_extruder = get_target_extruder_from_command(); const int8_t target_e_stepper = get_target_e_stepper_from_command();
if (target_extruder < 0) return; if (target_e_stepper < 0) return;
switch (target_extruder) { switch (target_e_stepper) {
#if AXIS_IS_L64XX(E0) #if AXIS_IS_L64XX(E0)
case 0: L6470_SET_KVAL_HOLD(E0); break; case 0: L6470_SET_KVAL_HOLD(E0); break;
#endif #endif

2
Marlin/src/gcode/feature/pause/M125.cpp
View File

@ -56,7 +56,7 @@
*/ */
void GcodeSuite::M125() { void GcodeSuite::M125() {
// Initial retract before move to filament change position // Initial retract before move to filament change position
const float retract = -ABS(parser.axisunitsval('L', E_AXIS, PAUSE_PARK_RETRACT_LENGTH)); const float retract = TERN0(HAS_EXTRUDERS, -ABS(parser.axisunitsval('L', E_AXIS, PAUSE_PARK_RETRACT_LENGTH)));
xyz_pos_t park_point = NOZZLE_PARK_POINT; xyz_pos_t park_point = NOZZLE_PARK_POINT;

26
Marlin/src/gcode/feature/trinamic/M569.cpp
View File

@ -40,7 +40,7 @@ void tmc_set_stealthChop(TMC &st, const bool enable) {
st.refresh_stepping_mode(); st.refresh_stepping_mode();
} }
static void set_stealth_status(const bool enable, const int8_t target_extruder) { static void set_stealth_status(const bool enable, const int8_t target_e_stepper) {
#define TMC_SET_STEALTH(Q) tmc_set_stealthChop(stepper##Q, enable) #define TMC_SET_STEALTH(Q) tmc_set_stealthChop(stepper##Q, enable)
#if X_HAS_STEALTHCHOP || Y_HAS_STEALTHCHOP || Z_HAS_STEALTHCHOP \ #if X_HAS_STEALTHCHOP || Y_HAS_STEALTHCHOP || Z_HAS_STEALTHCHOP \
@ -82,17 +82,19 @@ static void set_stealth_status(const bool enable, const int8_t target_extruder)
case K_AXIS: TMC_SET_STEALTH(K); break; case K_AXIS: TMC_SET_STEALTH(K); break;
#endif #endif
#if HAS_EXTRUDERS #if E_STEPPERS
case E_AXIS: { case E_AXIS: {
if (target_extruder < 0) return; if (target_e_stepper < 0) return;
OPTCODE(E0_HAS_STEALTHCHOP, else if (target_extruder == 0) TMC_SET_STEALTH(E0)) switch (target_e_stepper) {
OPTCODE(E1_HAS_STEALTHCHOP, else if (target_extruder == 1) TMC_SET_STEALTH(E1)) TERN_(E0_HAS_STEALTHCHOP, case 0: TMC_SET_STEALTH(E0); break;)
OPTCODE(E2_HAS_STEALTHCHOP, else if (target_extruder == 2) TMC_SET_STEALTH(E2)) TERN_(E1_HAS_STEALTHCHOP, case 1: TMC_SET_STEALTH(E1); break;)
OPTCODE(E3_HAS_STEALTHCHOP, else if (target_extruder == 3) TMC_SET_STEALTH(E3)) TERN_(E2_HAS_STEALTHCHOP, case 2: TMC_SET_STEALTH(E2); break;)
OPTCODE(E4_HAS_STEALTHCHOP, else if (target_extruder == 4) TMC_SET_STEALTH(E4)) TERN_(E3_HAS_STEALTHCHOP, case 3: TMC_SET_STEALTH(E3); break;)
OPTCODE(E5_HAS_STEALTHCHOP, else if (target_extruder == 5) TMC_SET_STEALTH(E5)) TERN_(E4_HAS_STEALTHCHOP, case 4: TMC_SET_STEALTH(E4); break;)
OPTCODE(E6_HAS_STEALTHCHOP, else if (target_extruder == 6) TMC_SET_STEALTH(E6)) TERN_(E5_HAS_STEALTHCHOP, case 5: TMC_SET_STEALTH(E5); break;)
OPTCODE(E7_HAS_STEALTHCHOP, else if (target_extruder == 7) TMC_SET_STEALTH(E7)) TERN_(E6_HAS_STEALTHCHOP, case 6: TMC_SET_STEALTH(E6); break;)
TERN_(E7_HAS_STEALTHCHOP, case 7: TMC_SET_STEALTH(E7); break;)
}
} break; } break;
#endif #endif
} }
@ -131,7 +133,7 @@ static void say_stealth_status() {
*/ */
void GcodeSuite::M569() { void GcodeSuite::M569() {
if (parser.seen('S')) if (parser.seen('S'))
set_stealth_status(parser.value_bool(), get_target_extruder_from_command()); set_stealth_status(parser.value_bool(), get_target_e_stepper_from_command());
else else
say_stealth_status(); say_stealth_status();
} }

8
Marlin/src/gcode/feature/trinamic/M906.cpp
View File

@ -102,11 +102,11 @@ void GcodeSuite::M906() {
case K_AXIS: TMC_SET_CURRENT(K); break; case K_AXIS: TMC_SET_CURRENT(K); break;
#endif #endif
#if HAS_EXTRUDERS #if E_STEPPERS
case E_AXIS: { case E_AXIS: {
const int8_t target_extruder = get_target_extruder_from_command(); const int8_t target_e_stepper = get_target_e_stepper_from_command();
if (target_extruder < 0) return; if (target_e_stepper < 0) return;
switch (target_extruder) { switch (target_e_stepper) {
#if AXIS_IS_TMC(E0) #if AXIS_IS_TMC(E0)
case 0: TMC_SET_CURRENT(E0); break; case 0: TMC_SET_CURRENT(E0); break;
#endif #endif

30
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View File

@ -265,20 +265,22 @@
TERN_(Z3_HAS_STEALTCHOP, if (index == 0 || index == 3) TMC_SET_PWMTHRS(Z,Z3)); TERN_(Z3_HAS_STEALTCHOP, if (index == 0 || index == 3) TMC_SET_PWMTHRS(Z,Z3));
TERN_(Z4_HAS_STEALTCHOP, if (index == 0 || index == 4) TMC_SET_PWMTHRS(Z,Z4)); TERN_(Z4_HAS_STEALTCHOP, if (index == 0 || index == 4) TMC_SET_PWMTHRS(Z,Z4));
break; break;
case E_AXIS: { #if E_STEPPERS
#if E_STEPPERS case E_AXIS: {
const int8_t target_extruder = get_target_extruder_from_command(); const int8_t target_e_stepper = get_target_e_stepper_from_command();
if (target_extruder < 0) return; if (target_e_stepper < 0) return;
TERN_(E0_HAS_STEALTHCHOP, else if (target_extruder == 0) TMC_SET_PWMTHRS_E(0)); switch (target_e_stepper) {
TERN_(E1_HAS_STEALTHCHOP, else if (target_extruder == 1) TMC_SET_PWMTHRS_E(1)); TERN_(E0_HAS_STEALTHCHOP, case 0: TMC_SET_PWMTHRS_E(0); break;)
TERN_(E2_HAS_STEALTHCHOP, else if (target_extruder == 2) TMC_SET_PWMTHRS_E(2)); TERN_(E1_HAS_STEALTHCHOP, case 1: TMC_SET_PWMTHRS_E(1); break;)
TERN_(E3_HAS_STEALTHCHOP, else if (target_extruder == 3) TMC_SET_PWMTHRS_E(3)); TERN_(E2_HAS_STEALTHCHOP, case 2: TMC_SET_PWMTHRS_E(2); break;)
TERN_(E4_HAS_STEALTHCHOP, else if (target_extruder == 4) TMC_SET_PWMTHRS_E(4)); TERN_(E3_HAS_STEALTHCHOP, case 3: TMC_SET_PWMTHRS_E(3); break;)
TERN_(E5_HAS_STEALTHCHOP, else if (target_extruder == 5) TMC_SET_PWMTHRS_E(5)); TERN_(E4_HAS_STEALTHCHOP, case 4: TMC_SET_PWMTHRS_E(4); break;)
TERN_(E6_HAS_STEALTHCHOP, else if (target_extruder == 6) TMC_SET_PWMTHRS_E(6)); TERN_(E5_HAS_STEALTHCHOP, case 5: TMC_SET_PWMTHRS_E(5); break;)
TERN_(E7_HAS_STEALTHCHOP, else if (target_extruder == 7) TMC_SET_PWMTHRS_E(7)); TERN_(E6_HAS_STEALTHCHOP, case 6: TMC_SET_PWMTHRS_E(6); break;)
#endif // E_STEPPERS TERN_(E7_HAS_STEALTHCHOP, case 7: TMC_SET_PWMTHRS_E(7); break;)
} break; }
} break;
#endif // E_STEPPERS
} }
} }

10
Marlin/src/gcode/host/M114.cpp
View File

@ -216,10 +216,12 @@ void GcodeSuite::M114() {
report_current_position_detail(); report_current_position_detail();
return; return;
} }
if (parser.seen_test('E')) { #if HAS_EXTRUDERS
SERIAL_ECHOLNPAIR("Count E:", stepper.position(E_AXIS)); if (parser.seen_test('E')) {
return; SERIAL_ECHOLNPAIR("Count E:", stepper.position(E_AXIS));
} return;
}
#endif
#endif #endif
#if ENABLED(M114_REALTIME) #if ENABLED(M114_REALTIME)

8
Marlin/src/gcode/parser.h
View File

@ -311,7 +311,13 @@ public:
} }
static inline float axis_unit_factor(const AxisEnum axis) { static inline float axis_unit_factor(const AxisEnum axis) {
return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); return (
#if HAS_EXTRUDERS
axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor
#else
linear_unit_factor
#endif
);
} }
static inline float linear_value_to_mm(const_float_t v) { return v * linear_unit_factor; } static inline float linear_value_to_mm(const_float_t v) { return v * linear_unit_factor; }

17
Marlin/src/module/motion.cpp
View File

@ -266,7 +266,18 @@ void report_current_position_projected() {
get_cartesian_from_steppers(); get_cartesian_from_steppers();
const xyz_pos_t lpos = cartes.asLogical(); const xyz_pos_t lpos = cartes.asLogical();
SERIAL_ECHOPAIR("X:", lpos.x, " Y:", lpos.y, " Z:", lpos.z, " E:", current_position.e); SERIAL_ECHOPAIR(
"X:", lpos.x
#if HAS_Y_AXIS
, " Y:", lpos.y
#endif
#if HAS_Z_AXIS
, " Z:", lpos.z
#endif
#if HAS_EXTRUDERS
, " E:", current_position.e
#endif
);
stepper.report_positions(); stepper.report_positions();
#if IS_SCARA #if IS_SCARA
@ -929,7 +940,7 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
float cartesian_mm = diff.magnitude(); float cartesian_mm = diff.magnitude();
// If the move is very short, check the E move distance // If the move is very short, check the E move distance
if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(diff.e); TERN_(HAS_EXTRUDERS, if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(diff.e));
// No E move either? Game over. // No E move either? Game over.
if (UNEAR_ZERO(cartesian_mm)) return true; if (UNEAR_ZERO(cartesian_mm)) return true;
@ -1008,7 +1019,7 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
// If the move is very short, check the E move distance // If the move is very short, check the E move distance
// No E move either? Game over. // No E move either? Game over.
float cartesian_mm = diff.magnitude(); float cartesian_mm = diff.magnitude();
if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(diff.e); TERN_(HAS_EXTRUDERS, if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(diff.e));
if (UNEAR_ZERO(cartesian_mm)) return; if (UNEAR_ZERO(cartesian_mm)) return;
// The length divided by the segment size // The length divided by the segment size