SAMD51: Some LCD pin fixes (#14915)

This commit is contained in:
Giuliano Zaro 2019-08-11 02:19:52 +02:00 committed by Scott Lahteine
parent d78086ccdc
commit f085199f5b

View File

@ -170,67 +170,69 @@
//
#if HAS_SPI_LCD
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_PINS_D4 48
#define LCD_PINS_D7 53
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 55
#define BEEPER_PIN 54
#define LCD_PINS_D4 48
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 55
#define LCD_PINS_ENABLE 56
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#elif EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 54
#define LCD_PINS_D4 48
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 55
#error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_PINS_D4 48
#define LCD_PINS_D5 -1 // 50 can't be used, it's MISO
#define LCD_PINS_D6 -1 // 52 can't be used, it's SCK
#define LCD_PINS_D7 53
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 55
#define LCD_PINS_ENABLE 56
#elif HAS_SSD1306_OLED_I2C
#error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_SDSS 10
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define BEEPER_PIN 54
#define LCD_SDSS 10
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#elif ENABLED(FYSETC_MINI_12864)
#error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define DOGLCD_CS 56
#define DOGLCD_A0 55
#define BEEPER_PIN 54
#define DOGLCD_CS 56
#define DOGLCD_A0 55
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#error "Pin compatibility check needed!"
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // D5
#define RGB_LED_R_PIN 50 // 50 can't be used, it's MISO
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // D6
#define RGB_LED_G_PIN 52 // 52 can't be used, it's SCK
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53 // D7
#define RGB_LED_B_PIN 53
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#define NEOPIXEL_PIN 50 // D5
#error "Pin compatibility check needed!"
#define NEOPIXEL_PIN 50 // 50 can't be used, it's MISO
#endif
#elif ENABLED(MKS_MINI_12864)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#error "Pin compatibility check needed!"
#define ORIG_BEEPER_PIN 75
#define DOGLCD_A0 52
#define DOGLCD_CS 50
#define DOGLCD_A0 52 // 52 can't be used, it's SCK
#define DOGLCD_CS 50 // 50 can't be used, it's MISO
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#endif