FYSETC_242 OLED 12864 for S6 (#20767)
This commit is contained in:
parent
7836b85c96
commit
f101e19257
@ -107,3 +107,16 @@ public:
|
|||||||
: U8GLIB(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset)
|
: U8GLIB(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset)
|
||||||
{ }
|
{ }
|
||||||
};
|
};
|
||||||
|
|
||||||
|
extern u8g_dev_t u8g_dev_ssd1309_sw_spi;
|
||||||
|
extern u8g_dev_t u8g_dev_ssd1309_hw_spi;
|
||||||
|
|
||||||
|
class U8GLIB_SSD1309_128X64_HAL : public U8GLIB {
|
||||||
|
public:
|
||||||
|
U8GLIB_SSD1309_128X64_HAL(pin_t sck, pin_t mosi, pin_t cs, pin_t a0, pin_t reset = U8G_PIN_NONE)
|
||||||
|
: U8GLIB(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset)
|
||||||
|
{ }
|
||||||
|
U8GLIB_SSD1309_128X64_HAL(pin_t cs, pin_t a0, pin_t reset = U8G_PIN_NONE)
|
||||||
|
: U8GLIB(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset)
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
@ -52,7 +52,9 @@
|
|||||||
|
|
||||||
#elif defined(ARDUINO_ARCH_STM32)
|
#elif defined(ARDUINO_ARCH_STM32)
|
||||||
|
|
||||||
|
uint8_t u8g_com_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
|
||||||
uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
|
uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
|
||||||
|
#define U8G_COM_HAL_SW_SPI_FN u8g_com_std_sw_spi_fn
|
||||||
#define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn
|
#define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn
|
||||||
|
|
||||||
#elif defined(__AVR__)
|
#elif defined(__AVR__)
|
||||||
|
@ -110,11 +110,9 @@
|
|||||||
#define U8G_CLASS U8GLIB_MINI12864_2X // 8 stripes (HW-SPI)
|
#define U8G_CLASS U8GLIB_MINI12864_2X // 8 stripes (HW-SPI)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#elif EITHER(MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864)
|
#elif ENABLED(MKS_12864OLED_SSD1306)
|
||||||
|
|
||||||
// MKS 128x64 (SSD1306) OLED I2C LCD
|
// MKS 128x64 (SSD1306) OLED I2C LCD
|
||||||
// - or -
|
|
||||||
// FYSETC OLED 2.42" 128 × 64 FULL GRAPHICS CONTROLLER
|
|
||||||
|
|
||||||
#define FORCE_SOFT_SPI // SW-SPI
|
#define FORCE_SOFT_SPI // SW-SPI
|
||||||
|
|
||||||
@ -124,6 +122,18 @@
|
|||||||
#define U8G_CLASS U8GLIB_SSD1306_128X64 // 8 stripes
|
#define U8G_CLASS U8GLIB_SSD1306_128X64 // 8 stripes
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(FYSETC_242_OLED_12864)
|
||||||
|
|
||||||
|
// FYSETC OLED 2.42" 128 × 64 FULL GRAPHICS CONTROLLER
|
||||||
|
|
||||||
|
#define FORCE_SOFT_SPI // SW-SPI
|
||||||
|
|
||||||
|
#if ENABLED(ALTERNATIVE_LCD)
|
||||||
|
#define U8G_CLASS U8GLIB_SSD1306_128X64_2X // 4 stripes
|
||||||
|
#else
|
||||||
|
#define U8G_CLASS U8GLIB_SSD1309_128X64_HAL
|
||||||
|
#endif
|
||||||
|
|
||||||
#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
|
#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
|
||||||
|
|
||||||
// Zonestar SSD1306 OLED SPI LCD
|
// Zonestar SSD1306 OLED SPI LCD
|
||||||
|
128
Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp
Normal file
128
Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp
Normal file
@ -0,0 +1,128 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#include "../../inc/MarlinConfigPre.h"
|
||||||
|
|
||||||
|
#if HAS_MARLINUI_U8GLIB
|
||||||
|
|
||||||
|
#include "HAL_LCD_com_defines.h"
|
||||||
|
#include <U8glib.h>
|
||||||
|
|
||||||
|
#define WIDTH 128
|
||||||
|
#define HEIGHT 64
|
||||||
|
#define PAGE_HEIGHT 8
|
||||||
|
|
||||||
|
// SSD1309 init sequence
|
||||||
|
static const uint8_t u8g_dev_ssd1309_128x64_init_seq[] PROGMEM = {
|
||||||
|
U8G_ESC_CS(0), // Disable chip
|
||||||
|
U8G_ESC_ADR(0), // Instruction mode
|
||||||
|
U8G_ESC_RST(1), // Do reset low pulse with (1*16)+2 milliseconds
|
||||||
|
U8G_ESC_CS(1), // Enable chip
|
||||||
|
|
||||||
|
0xFD,0x12, // Command Lock
|
||||||
|
0xAE, // Set Display Off
|
||||||
|
0xD5,0xA0, // Set Display Clock Divide Ratio/Oscillator Frequency
|
||||||
|
0xA8,0x3F, // Set Multiplex Ratio
|
||||||
|
0x3D,0x00, // Set Display Offset
|
||||||
|
0x40, // Set Display Start Line
|
||||||
|
0xA1, // Set Segment Re-Map
|
||||||
|
0xC8, // Set COM Output Scan Direction
|
||||||
|
0xDA,0x12, // Set COM Pins Hardware Configuration
|
||||||
|
0x81,0xDF, // Set Current Control
|
||||||
|
0xD9,0x82, // Set Pre-Charge Period
|
||||||
|
0xDB,0x34, // Set VCOMH Deselect Level
|
||||||
|
0xA4, // Set Entire Display On/Off
|
||||||
|
0xA6, // Set Normal/Inverse Display
|
||||||
|
U8G_ESC_VCC(1), // Power up VCC & Stabilized
|
||||||
|
U8G_ESC_DLY(50),
|
||||||
|
0xAF, // Set Display On
|
||||||
|
U8G_ESC_DLY(50),
|
||||||
|
U8G_ESC_CS(0), // Disable chip
|
||||||
|
U8G_ESC_END // End of sequence
|
||||||
|
};
|
||||||
|
|
||||||
|
// Select one init sequence here
|
||||||
|
#define u8g_dev_ssd1309_128x64_init_seq u8g_dev_ssd1309_128x64_init_seq
|
||||||
|
|
||||||
|
static const uint8_t u8g_dev_ssd1309_128x64_data_start[] PROGMEM = {
|
||||||
|
U8G_ESC_ADR(0), // Instruction mode
|
||||||
|
U8G_ESC_CS(1), // Enable chip
|
||||||
|
0x010, // Set upper 4 bit of the col adr to 0
|
||||||
|
0x000, // Set lower 4 bit of the col adr to 4
|
||||||
|
U8G_ESC_END // End of sequence
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
|
||||||
|
U8G_ESC_ADR(0), // Instruction mode
|
||||||
|
U8G_ESC_CS(1), // Enable chip
|
||||||
|
0x0AE, // Display off
|
||||||
|
U8G_ESC_CS(0), // Disable chip
|
||||||
|
U8G_ESC_END // End of sequence
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
|
||||||
|
U8G_ESC_ADR(0), // Instruction mode
|
||||||
|
U8G_ESC_CS(1), // Enable chip
|
||||||
|
0x0AF, // Display on
|
||||||
|
U8G_ESC_DLY(50), // Delay 50 ms
|
||||||
|
U8G_ESC_CS(0), // Disable chip
|
||||||
|
U8G_ESC_END // End of sequence
|
||||||
|
};
|
||||||
|
|
||||||
|
uint8_t u8g_dev_ssd1309_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
|
||||||
|
switch(msg) {
|
||||||
|
case U8G_DEV_MSG_INIT:
|
||||||
|
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
|
||||||
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1309_128x64_init_seq);
|
||||||
|
break;
|
||||||
|
case U8G_DEV_MSG_STOP:
|
||||||
|
break;
|
||||||
|
case U8G_DEV_MSG_PAGE_NEXT: {
|
||||||
|
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
|
||||||
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1309_128x64_data_start);
|
||||||
|
u8g_WriteByte(u8g, dev, 0x0B0 | pb->p.page); // Select current page (SSD1306)
|
||||||
|
u8g_SetAddress(u8g, dev, 1); // Data mode
|
||||||
|
if (u8g_pb_WriteBuffer(pb, u8g, dev) == 0) return 0;
|
||||||
|
u8g_SetChipSelect(u8g, dev, 0);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case U8G_DEV_MSG_CONTRAST:
|
||||||
|
u8g_SetChipSelect(u8g, dev, 1);
|
||||||
|
u8g_SetAddress(u8g, dev, 0); // Instruction mode
|
||||||
|
u8g_WriteByte(u8g, dev, 0x081);
|
||||||
|
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) ); // 11 Jul 2015: fixed contrast calculation
|
||||||
|
u8g_SetChipSelect(u8g, dev, 0);
|
||||||
|
return 1;
|
||||||
|
case U8G_DEV_MSG_SLEEP_ON:
|
||||||
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
|
||||||
|
return 1;
|
||||||
|
case U8G_DEV_MSG_SLEEP_OFF:
|
||||||
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t u8g_dev_ssd1309_buf[WIDTH*2] U8G_NOCOMMON ;
|
||||||
|
u8g_pb_t u8g_dev_ssd1309_pb = { {8, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1309_buf};
|
||||||
|
u8g_dev_t u8g_dev_ssd1309_sw_spi = { u8g_dev_ssd1309_128x64_fn, &u8g_dev_ssd1309_pb, U8G_COM_HAL_SW_SPI_FN };
|
||||||
|
|
||||||
|
#endif // HAS_MARLINUI_U8GLIB
|
@ -198,7 +198,27 @@
|
|||||||
//
|
//
|
||||||
// LCD / Controller
|
// LCD / Controller
|
||||||
//
|
//
|
||||||
#if HAS_WIRED_LCD
|
#if ENABLED(FYSETC_242_OLED_12864)
|
||||||
|
|
||||||
|
#define BTN_EN1 PC9
|
||||||
|
#define BTN_EN2 PD1
|
||||||
|
#define BTN_ENC PA8
|
||||||
|
|
||||||
|
#define BEEPER_PIN PC6
|
||||||
|
|
||||||
|
#define LCD_PINS_DC PC12
|
||||||
|
#define LCD_PINS_RS PC7 // LCD_RST
|
||||||
|
#define DOGLCD_CS PD2
|
||||||
|
#define DOGLCD_MOSI PC10
|
||||||
|
#define DOGLCD_SCK PC11
|
||||||
|
#define DOGLCD_A0 LCD_PINS_DC
|
||||||
|
#define FORCE_SOFT_SPI
|
||||||
|
|
||||||
|
#define KILL_PIN -1 // NC
|
||||||
|
#define NEOPIXEL_PIN PD0
|
||||||
|
|
||||||
|
#elif HAS_WIRED_LCD
|
||||||
|
|
||||||
#define BEEPER_PIN PC9
|
#define BEEPER_PIN PC9
|
||||||
#define BTN_ENC PA8
|
#define BTN_ENC PA8
|
||||||
|
|
||||||
@ -211,11 +231,6 @@
|
|||||||
#define LCD_PINS_ENABLE PD1
|
#define LCD_PINS_ENABLE PD1
|
||||||
#define LCD_PINS_D4 PC12
|
#define LCD_PINS_D4 PC12
|
||||||
|
|
||||||
// CR10_STOCKDISPLAY default timing is too fast
|
|
||||||
#undef BOARD_ST7920_DELAY_1
|
|
||||||
#undef BOARD_ST7920_DELAY_2
|
|
||||||
#undef BOARD_ST7920_DELAY_3
|
|
||||||
|
|
||||||
#else
|
#else
|
||||||
|
|
||||||
#define LCD_PINS_RS PD2
|
#define LCD_PINS_RS PD2
|
||||||
@ -249,23 +264,23 @@
|
|||||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||||
#define NEOPIXEL_PIN PC12
|
#define NEOPIXEL_PIN PC12
|
||||||
#endif
|
#endif
|
||||||
#endif // !FYSETC_MINI_12864
|
#endif
|
||||||
|
|
||||||
#if IS_ULTIPANEL
|
#if IS_ULTIPANEL
|
||||||
#define LCD_PINS_D5 PC12
|
#define LCD_PINS_D5 PC12
|
||||||
#define LCD_PINS_D6 PD0
|
#define LCD_PINS_D6 PD0
|
||||||
#define LCD_PINS_D7 PD1
|
#define LCD_PINS_D7 PD1
|
||||||
|
|
||||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||||
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Alter timing for graphical display
|
#endif // HAS_WIRED_LCD
|
||||||
#if HAS_MARLINUI_U8GLIB
|
|
||||||
|
// Alter timing for graphical display
|
||||||
|
#if HAS_MARLINUI_U8GLIB
|
||||||
#ifndef BOARD_ST7920_DELAY_1
|
#ifndef BOARD_ST7920_DELAY_1
|
||||||
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
|
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
|
||||||
#endif
|
#endif
|
||||||
@ -275,9 +290,7 @@
|
|||||||
#ifndef BOARD_ST7920_DELAY_3
|
#ifndef BOARD_ST7920_DELAY_3
|
||||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(640)
|
#define BOARD_ST7920_DELAY_3 DELAY_NS(640)
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif // HAS_WIRED_LCD
|
|
||||||
|
|
||||||
#ifndef RGB_LED_R_PIN
|
#ifndef RGB_LED_R_PIN
|
||||||
#define RGB_LED_R_PIN PB6
|
#define RGB_LED_R_PIN PB6
|
||||||
|
Loading…
Reference in New Issue
Block a user