MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

📝 Tweak G26 Q description

Browse Source
This commit is contained in:
Scott Lahteine 2021-02-15 04:10:17 -06:00
parent 1d0ca179b5
commit f33ec4aacf
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -71,8 +71,8 @@
* pliers while holding the LCD Click wheel in a depressed state. If you do not have * pliers while holding the LCD Click wheel in a depressed state. If you do not have
* an LCD, you must specify a value if you use P. * an LCD, you must specify a value if you use P.
* *
* Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and * Q # Multiplier Retraction Multiplier. (Normally not needed.) During G26 retraction will use the length
* un-retraction is at 1.2mm These numbers will be scaled by the specified amount * specified by this parameter (1mm by default). Recover will be 1.2x the retract distance.
* *
* R # Repeat Prints the number of patterns given as a parameter, starting at the current location. * R # Repeat Prints the number of patterns given as a parameter, starting at the current location.
* If a parameter isn't given, every point will be printed unless G26 is interrupted. * If a parameter isn't given, every point will be printed unless G26 is interrupted.