Clean up, update config comments

This commit is contained in:
Scott Lahteine 2019-02-08 15:13:28 -06:00
parent ae03753ef1
commit f3b6cb4d34
89 changed files with 97 additions and 616 deletions

View File

@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,8 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -217,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -195,7 +195,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -206,9 +206,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -219,9 +216,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -195,7 +195,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -206,8 +206,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +216,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -202,7 +202,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -213,9 +213,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -226,9 +223,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -195,7 +195,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -206,9 +206,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -219,9 +216,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -203,7 +203,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -214,9 +214,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -227,9 +224,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,8 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -217,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER
@ -1771,7 +1766,7 @@
// //
// //
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
// //
//#define SAV_3DLCD //#define SAV_3DLCD

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -235,7 +235,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -246,9 +246,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -259,9 +256,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -197,7 +197,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -208,9 +208,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -221,9 +218,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -198,7 +198,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -209,9 +209,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -222,9 +219,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -199,7 +199,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -210,9 +210,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -223,9 +220,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -214,7 +214,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -225,9 +225,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -238,9 +235,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -199,7 +199,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -210,9 +210,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -223,9 +220,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -195,7 +195,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -206,8 +206,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +216,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,8 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -217,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -197,7 +197,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -208,9 +208,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -221,9 +218,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -225,7 +225,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -236,9 +236,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -249,9 +246,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -216,7 +216,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -227,9 +227,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -240,9 +237,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,8 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -217,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -214,7 +214,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -225,9 +225,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -238,9 +235,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -213,7 +213,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -224,8 +224,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -236,9 +234,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER
@ -1798,11 +1793,18 @@
// //
// //
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//============================================================================= //=============================================================================
//======================= LCD / Controller Selection ======================= //======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ======================== //========================= (Graphical LCDs) ========================

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -209,7 +209,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -220,9 +220,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -233,9 +230,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -199,7 +199,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -210,9 +210,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -223,9 +220,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,8 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -217,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -198,7 +198,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -209,9 +209,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -222,9 +219,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -199,7 +199,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -210,9 +210,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -223,9 +220,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER

View File

@ -194,7 +194,7 @@
#endif #endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
//#define SWITCHING_NOZZLE //#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define SWITCHING_NOZZLE_SERVO_NR 0 #define SWITCHING_NOZZLE_SERVO_NR 0
@ -205,9 +205,6 @@
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
* via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define PARKING_EXTRUDER //#define PARKING_EXTRUDER
@ -218,9 +215,6 @@
* project : https://www.thingiverse.com/thing:3080893 * project : https://www.thingiverse.com/thing:3080893
* movements : https://youtu.be/0xCEiG9VS3k * movements : https://youtu.be/0xCEiG9VS3k
* https://youtu.be/Bqbcs0CU2FE * https://youtu.be/Bqbcs0CU2FE
*
* for cooling multi extruder with separate fans
* see on Configuration_adv.h and look for "Part-Cooling"
*/ */
//#define MAGNETIC_PARKING_EXTRUDER //#define MAGNETIC_PARKING_EXTRUDER