From f3db2551a6c1b32ba4a694f2ff81e23ba298165c Mon Sep 17 00:00:00 2001 From: MoellerDi Date: Mon, 1 Mar 2021 15:03:41 +0100 Subject: [PATCH] G-code Digital Buttons (#18389) Co-Authored-By: android444 <24375898+android444@users.noreply.github.com> Co-authored-by: Scott Lahteine --- Marlin/Configuration_adv.h | 31 ++++++ Marlin/src/MarlinCore.cpp | 179 ++++++++++++++++++++++++++++++- Marlin/src/pins/pinsDebug_list.h | 75 +++++++++++++ 3 files changed, 284 insertions(+), 1 deletion(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 9032f4d2d8..8bbc50bee4 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -3369,6 +3369,37 @@ #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro #endif +/** + * User-defined buttons to run custom G-code. + * Up to 25 may be defined. + */ +//#define CUSTOM_USER_BUTTONS +#if ENABLED(CUSTOM_USER_BUTTONS) + //#define BUTTON1_PIN -1 + #if PIN_EXISTS(BUTTON1_PIN) + #define BUTTON1_HIT_STATE LOW // State of the triggered button. NC=LOW. NO=HIGH. + #define BUTTON1_WHEN_PRINTING false // Button allowed to trigger during printing? + #define BUTTON1_GCODE "G28" + #define BUTTON1_DESC "Homing" // Optional string to set the LCD status + #endif + + //#define BUTTON2_PIN -1 + #if PIN_EXISTS(BUTTON2_PIN) + #define BUTTON2_HIT_STATE LOW + #define BUTTON2_WHEN_PRINTING false + #define BUTTON2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define BUTTON2_DESC "Preheat for " PREHEAT_1_LABEL + #endif + + //#define BUTTON3_PIN -1 + #if PIN_EXISTS(BUTTON3_PIN) + #define BUTTON3_HIT_STATE LOW + #define BUTTON3_WHEN_PRINTING false + #define BUTTON3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define BUTTON3_DESC "Preheat for " PREHEAT_2_LABEL + #endif +#endif + /** * User-defined menu items to run custom G-code. * Up to 25 may be defined, but the actual number is LCD-dependent. diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index 751d098606..689650c6ab 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -406,6 +406,7 @@ void startOrResumeJob() { * - Check if CHDK_PIN needs to go LOW * - Check for KILL button held down * - Check for HOME button held down + * - Check for CUSTOM USER button held down * - Check if cooling fan needs to be switched on * - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT) * - Pulse FET_SAFETY_PIN if it exists @@ -498,6 +499,102 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) { } #endif + #if ENABLED(CUSTOM_USER_BUTTONS) + // Handle a custom user button if defined + const bool printer_not_busy = !printingIsActive(); + #define HAS_CUSTOM_USER_BUTTON(N) (PIN_EXISTS(BUTTON##N) && defined(BUTTON##N##_HIT_STATE) && defined(BUTTON##N##_GCODE) && defined(BUTTON##N##_DESC)) + #define CHECK_CUSTOM_USER_BUTTON(N) do{ \ + constexpr millis_t CUB_DEBOUNCE_DELAY_##N = 250UL; \ + static millis_t next_cub_ms_##N; \ + if (BUTTON##N##_HIT_STATE == READ(BUTTON##N##_PIN) \ + && (ENABLED(BUTTON##N##_WHEN_PRINTING) || printer_not_busy)) { \ + const millis_t ms = millis(); \ + if (ELAPSED(ms, next_cub_ms_##N)) { \ + next_cub_ms_##N = ms + CUB_DEBOUNCE_DELAY_##N; \ + if (strlen(BUTTON##N##_DESC)) \ + LCD_MESSAGEPGM_P(PSTR(BUTTON##N##_DESC)); \ + queue.inject_P(PSTR(BUTTON##N##_GCODE)); \ + } \ + } \ + }while(0) + + #if HAS_CUSTOM_USER_BUTTON(1) + CHECK_CUSTOM_USER_BUTTON(1); + #endif + #if HAS_CUSTOM_USER_BUTTON(2) + CHECK_CUSTOM_USER_BUTTON(2); + #endif + #if HAS_CUSTOM_USER_BUTTON(3) + CHECK_CUSTOM_USER_BUTTON(3); + #endif + #if HAS_CUSTOM_USER_BUTTON(4) + CHECK_CUSTOM_USER_BUTTON(4); + #endif + #if HAS_CUSTOM_USER_BUTTON(5) + CHECK_CUSTOM_USER_BUTTON(5); + #endif + #if HAS_CUSTOM_USER_BUTTON(6) + CHECK_CUSTOM_USER_BUTTON(6); + #endif + #if HAS_CUSTOM_USER_BUTTON(7) + CHECK_CUSTOM_USER_BUTTON(7); + #endif + #if HAS_CUSTOM_USER_BUTTON(8) + CHECK_CUSTOM_USER_BUTTON(8); + #endif + #if HAS_CUSTOM_USER_BUTTON(9) + CHECK_CUSTOM_USER_BUTTON(9); + #endif + #if HAS_CUSTOM_USER_BUTTON(10) + CHECK_CUSTOM_USER_BUTTON(10); + #endif + #if HAS_CUSTOM_USER_BUTTON(11) + CHECK_CUSTOM_USER_BUTTON(11); + #endif + #if HAS_CUSTOM_USER_BUTTON(12) + CHECK_CUSTOM_USER_BUTTON(12); + #endif + #if HAS_CUSTOM_USER_BUTTON(13) + CHECK_CUSTOM_USER_BUTTON(13); + #endif + #if HAS_CUSTOM_USER_BUTTON(14) + CHECK_CUSTOM_USER_BUTTON(14); + #endif + #if HAS_CUSTOM_USER_BUTTON(15) + CHECK_CUSTOM_USER_BUTTON(15); + #endif + #if HAS_CUSTOM_USER_BUTTON(16) + CHECK_CUSTOM_USER_BUTTON(16); + #endif + #if HAS_CUSTOM_USER_BUTTON(17) + CHECK_CUSTOM_USER_BUTTON(17); + #endif + #if HAS_CUSTOM_USER_BUTTON(18) + CHECK_CUSTOM_USER_BUTTON(18); + #endif + #if HAS_CUSTOM_USER_BUTTON(19) + CHECK_CUSTOM_USER_BUTTON(19); + #endif + #if HAS_CUSTOM_USER_BUTTON(20) + CHECK_CUSTOM_USER_BUTTON(20); + #endif + #if HAS_CUSTOM_USER_BUTTON(21) + CHECK_CUSTOM_USER_BUTTON(21); + #endif + #if HAS_CUSTOM_USER_BUTTON(22) + CHECK_CUSTOM_USER_BUTTON(22); + #endif + #if HAS_CUSTOM_USER_BUTTON(23) + CHECK_CUSTOM_USER_BUTTON(23); + #endif + #if HAS_CUSTOM_USER_BUTTON(24) + CHECK_CUSTOM_USER_BUTTON(24); + #endif + #if HAS_CUSTOM_USER_BUTTON(25) + CHECK_CUSTOM_USER_BUTTON(25); + #endif + #endif + TERN_(USE_CONTROLLER_FAN, controllerFan.update()); // Check if fan should be turned on to cool stepper drivers down TERN_(AUTO_POWER_CONTROL, powerManager.check()); @@ -857,7 +954,7 @@ inline void tmc_standby_setup() { /** * Marlin entry-point: Set up before the program loop - * - Set up the kill pin, filament runout, power hold + * - Set up the kill pin, filament runout, power hold, custom user buttons * - Start the serial port * - Print startup messages and diagnostics * - Get EEPROM or default settings @@ -1131,6 +1228,86 @@ void setup() { SET_INPUT_PULLUP(HOME_PIN); #endif + #if ENABLED(CUSTOM_USER_BUTTONS) + #define INIT_CUSTOM_USER_BUTTON_PIN(N) do{ SET_INPUT(BUTTON##N##_PIN); WRITE(BUTTON##N##_PIN, !BUTTON##N##_HIT_STATE); }while(0) + + #if HAS_CUSTOM_USER_BUTTON(1) + INIT_CUSTOM_USER_BUTTON_PIN(1); + #endif + #if HAS_CUSTOM_USER_BUTTON(2) + INIT_CUSTOM_USER_BUTTON_PIN(2); + #endif + #if HAS_CUSTOM_USER_BUTTON(3) + INIT_CUSTOM_USER_BUTTON_PIN(3); + #endif + #if HAS_CUSTOM_USER_BUTTON(4) + INIT_CUSTOM_USER_BUTTON_PIN(4); + #endif + #if HAS_CUSTOM_USER_BUTTON(5) + INIT_CUSTOM_USER_BUTTON_PIN(5); + #endif + #if HAS_CUSTOM_USER_BUTTON(6) + INIT_CUSTOM_USER_BUTTON_PIN(6); + #endif + #if HAS_CUSTOM_USER_BUTTON(7) + INIT_CUSTOM_USER_BUTTON_PIN(7); + #endif + #if HAS_CUSTOM_USER_BUTTON(8) + INIT_CUSTOM_USER_BUTTON_PIN(8); + #endif + #if HAS_CUSTOM_USER_BUTTON(9) + INIT_CUSTOM_USER_BUTTON_PIN(9); + #endif + #if HAS_CUSTOM_USER_BUTTON(10) + INIT_CUSTOM_USER_BUTTON_PIN(10); + #endif + #if HAS_CUSTOM_USER_BUTTON(11) + INIT_CUSTOM_USER_BUTTON_PIN(11); + #endif + #if HAS_CUSTOM_USER_BUTTON(12) + INIT_CUSTOM_USER_BUTTON_PIN(12); + #endif + #if HAS_CUSTOM_USER_BUTTON(13) + INIT_CUSTOM_USER_BUTTON_PIN(13); + #endif + #if HAS_CUSTOM_USER_BUTTON(14) + INIT_CUSTOM_USER_BUTTON_PIN(14); + #endif + #if HAS_CUSTOM_USER_BUTTON(15) + INIT_CUSTOM_USER_BUTTON_PIN(15); + #endif + #if HAS_CUSTOM_USER_BUTTON(16) + INIT_CUSTOM_USER_BUTTON_PIN(16); + #endif + #if HAS_CUSTOM_USER_BUTTON(17) + INIT_CUSTOM_USER_BUTTON_PIN(17); + #endif + #if HAS_CUSTOM_USER_BUTTON(18) + INIT_CUSTOM_USER_BUTTON_PIN(18); + #endif + #if HAS_CUSTOM_USER_BUTTON(19) + INIT_CUSTOM_USER_BUTTON_PIN(19); + #endif + #if HAS_CUSTOM_USER_BUTTON(20) + INIT_CUSTOM_USER_BUTTON_PIN(20); + #endif + #if HAS_CUSTOM_USER_BUTTON(21) + INIT_CUSTOM_USER_BUTTON_PIN(21); + #endif + #if HAS_CUSTOM_USER_BUTTON(22) + INIT_CUSTOM_USER_BUTTON_PIN(22); + #endif + #if HAS_CUSTOM_USER_BUTTON(23) + INIT_CUSTOM_USER_BUTTON_PIN(23); + #endif + #if HAS_CUSTOM_USER_BUTTON(24) + INIT_CUSTOM_USER_BUTTON_PIN(24); + #endif + #if HAS_CUSTOM_USER_BUTTON(25) + INIT_CUSTOM_USER_BUTTON_PIN(25); + #endif + #endif + #if PIN_EXISTS(STAT_LED_RED) OUT_WRITE(STAT_LED_RED_PIN, LOW); // OFF #endif diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 79a67c34f8..42095fa926 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -183,6 +183,81 @@ #if PIN_EXISTS(JOY_EN) REPORT_NAME_DIGITAL(__LINE__, JOY_EN_PIN) #endif +#if PIN_EXISTS(BUTTON1) + REPORT_NAME_DIGITAL(__LINE__, BUTTON1_PIN) +#endif +#if PIN_EXISTS(BUTTON2) + REPORT_NAME_DIGITAL(__LINE__, BUTTON2_PIN) +#endif +#if PIN_EXISTS(BUTTON3) + REPORT_NAME_DIGITAL(__LINE__, BUTTON3_PIN) +#endif +#if PIN_EXISTS(BUTTON4) + REPORT_NAME_DIGITAL(__LINE__, BUTTON4_PIN) +#endif +#if PIN_EXISTS(BUTTON5) + REPORT_NAME_DIGITAL(__LINE__, BUTTON5_PIN) +#endif +#if PIN_EXISTS(BUTTON6) + REPORT_NAME_DIGITAL(__LINE__, BUTTON6_PIN) +#endif +#if PIN_EXISTS(BUTTON7) + REPORT_NAME_DIGITAL(__LINE__, BUTTON7_PIN) +#endif +#if PIN_EXISTS(BUTTON8) + REPORT_NAME_DIGITAL(__LINE__, BUTTON8_PIN) +#endif +#if PIN_EXISTS(BUTTON9) + REPORT_NAME_DIGITAL(__LINE__, BUTTON9_PIN) +#endif +#if PIN_EXISTS(BUTTON10) + REPORT_NAME_DIGITAL(__LINE__, BUTTON10_PIN) +#endif +#if PIN_EXISTS(BUTTON11) + REPORT_NAME_DIGITAL(__LINE__, BUTTON11_PIN) +#endif +#if PIN_EXISTS(BUTTON12) + REPORT_NAME_DIGITAL(__LINE__, BUTTON12_PIN) +#endif +#if PIN_EXISTS(BUTTON13) + REPORT_NAME_DIGITAL(__LINE__, BUTTON13_PIN) +#endif +#if PIN_EXISTS(BUTTON14) + REPORT_NAME_DIGITAL(__LINE__, BUTTON14_PIN) +#endif +#if PIN_EXISTS(BUTTON15) + REPORT_NAME_DIGITAL(__LINE__, BUTTON15_PIN) +#endif +#if PIN_EXISTS(BUTTON16) + REPORT_NAME_DIGITAL(__LINE__, BUTTON16_PIN) +#endif +#if PIN_EXISTS(BUTTON17) + REPORT_NAME_DIGITAL(__LINE__, BUTTON17_PIN) +#endif +#if PIN_EXISTS(BUTTON18) + REPORT_NAME_DIGITAL(__LINE__, BUTTON18_PIN) +#endif +#if PIN_EXISTS(BUTTON19) + REPORT_NAME_DIGITAL(__LINE__, BUTTON19_PIN) +#endif +#if PIN_EXISTS(BUTTON20) + REPORT_NAME_DIGITAL(__LINE__, BUTTON20_PIN) +#endif +#if PIN_EXISTS(BUTTON21) + REPORT_NAME_DIGITAL(__LINE__, BUTTON21_PIN) +#endif +#if PIN_EXISTS(BUTTON22) + REPORT_NAME_DIGITAL(__LINE__, BUTTON22_PIN) +#endif +#if PIN_EXISTS(BUTTON23) + REPORT_NAME_DIGITAL(__LINE__, BUTTON23_PIN) +#endif +#if PIN_EXISTS(BUTTON24) + REPORT_NAME_DIGITAL(__LINE__, BUTTON24_PIN) +#endif +#if PIN_EXISTS(BUTTON25) + REPORT_NAME_DIGITAL(__LINE__, BUTTON25_PIN) +#endif #if PIN_EXISTS(CASE_LIGHT) REPORT_NAME_DIGITAL(__LINE__, CASE_LIGHT_PIN) #endif