Use #undef in AZTEEG_X3_PRO for RAMPS overrides

This commit is contained in:
Scott Lahteine 2016-04-28 18:04:45 -07:00
parent c6f1337f5c
commit f508c54c6c

View File

@ -28,6 +28,8 @@
#undef FAN_PIN #undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System #define FAN_PIN 6 //Part Cooling System
#undef BEEPER_PIN
#define BEEPER_PIN 33 #define BEEPER_PIN 33
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable) #define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
//Fans/Water Pump to cool the hotend cool side. //Fans/Water Pump to cool the hotend cool side.
@ -55,7 +57,8 @@
#define Z_MIN_PIN 19 #define Z_MIN_PIN 19
#define Z_MAX_PIN 18 #define Z_MAX_PIN 18
#endif #endif
//
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if ENABLED(Z_MIN_PROBE_ENDSTOP)
//#undef Z_MIN_PIN //#undef Z_MIN_PIN
//#define Z_MIN_PIN 15 //#define Z_MIN_PIN 15
@ -95,10 +98,11 @@
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro #define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
// //
//These Servo pins are for when they are defined. Tested for usage with bed leveling // These Servo pins are for when they are defined. Tested for usage with bed leveling
//on a Delta with 1 servo. Running through the Z servo endstop in code. // on a Delta with 1 servo. Running through the Z servo endstop in code.
//Physical wire attachment was done on EXT1 on the GND, 5V, and D47 pins. // Physical wire attachment was done on EXT1 on the GND, 5V, and D47 pins.
// //
#undef SERVO0_PIN
#define SERVO0_PIN 47 #define SERVO0_PIN 47
//LCD Pins// //LCD Pins//