Merge remote-tracking branch 'upstream/bugfix-2.0.x' into 2.0.x
This commit is contained in:
Scott Lahteine
commit
f9aec2685c
|
|
@ -0,0 +1,19 @@
|
|||
# editorconfig.org
|
||||
root = true
|
||||
|
||||
[{*.patch,syntax_test_*}]
|
||||
trim_trailing_whitespace = false
|
||||
|
||||
[{*.c,*.cpp,*.h}]
|
||||
charset = utf-8
|
||||
|
||||
[{*.c,*.cpp,*.h,Makefile}]
|
||||
trim_trailing_whitespace = true
|
||||
insert_final_newline = true
|
||||
end_of_line = lf
|
||||
indent_style = space
|
||||
indent_size = 2
|
||||
|
||||
[{*.py,*.conf,*.sublime-project}]
|
||||
indent_style = tab
|
||||
indent_size = 4
|
||||
|
|
@ -32,6 +32,7 @@ jobs:
|
|||
- megaatmega2560
|
||||
- teensy31
|
||||
- teensy35
|
||||
- SAMD51_grandcentral_m4
|
||||
|
||||
# Extended AVR Environments
|
||||
|
||||
|
|
@ -75,7 +76,6 @@ jobs:
|
|||
#- mks_robin_lite
|
||||
#- mks_robin_mini
|
||||
#- mks_robin_nano
|
||||
#- SAMD51_grandcentral_m4
|
||||
|
||||
steps:
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#
|
||||
# Marlin 3D Printer Firmware
|
||||
# Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
#
|
||||
# Based on Sprinter and grbl.
|
||||
# Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -146,6 +146,9 @@ Marlin/*/*/readme.txt
|
|||
Marlin/*/*/*/readme.txt
|
||||
Marlin/*/*/*/*/readme.txt
|
||||
|
||||
# Secure Credentials
|
||||
Configuration_Secure.h
|
||||
|
||||
#Visual Studio
|
||||
*.sln
|
||||
*.vcxproj
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -36,7 +36,7 @@
|
|||
* Advanced settings can be found in Configuration_adv.h
|
||||
*
|
||||
*/
|
||||
#define CONFIGURATION_H_VERSION 020000
|
||||
#define CONFIGURATION_H_VERSION 020004
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
|
|
@ -1065,12 +1065,14 @@
|
|||
|
||||
// @section homing
|
||||
|
||||
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
|
||||
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
|
||||
|
||||
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
|
||||
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
|
||||
|
||||
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure you have this distance over your Z_MAX_POS in case.
|
||||
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
|
||||
|
||||
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
|
||||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
|
|
@ -1232,6 +1234,7 @@
|
|||
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
||||
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
|
||||
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1311,10 +1314,10 @@
|
|||
//#define LEVEL_BED_CORNERS
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
|
||||
#define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
|
||||
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -31,7 +31,7 @@
|
|||
* Basic settings can be found in Configuration.h
|
||||
*
|
||||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 020000
|
||||
#define CONFIGURATION_ADV_H_VERSION 020004
|
||||
|
||||
// @section temperature
|
||||
|
||||
|
|
@ -668,11 +668,37 @@
|
|||
*/
|
||||
//#define Z_STEPPER_AUTO_ALIGN
|
||||
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
||||
// Define probe X and Y positions for Z1, Z2 [, Z3]
|
||||
#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
|
||||
// Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
|
||||
// If not defined, probe limits will be used.
|
||||
// Override with 'M422 S<index> X<pos> Y<pos>'
|
||||
//#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
|
||||
|
||||
/**
|
||||
* Orientation for the automatically-calculated probe positions.
|
||||
* Override Z stepper align points with 'M422 S<index> X<pos> Y<pos>'
|
||||
*
|
||||
* 2 Steppers: (0) (1)
|
||||
* | | 2 |
|
||||
* | 1 2 | |
|
||||
* | | 1 |
|
||||
*
|
||||
* 3 Steppers: (0) (1) (2) (3)
|
||||
* | 3 | 1 | 2 1 | 2 |
|
||||
* | | 3 | | 3 |
|
||||
* | 1 2 | 2 | 3 | 1 |
|
||||
*
|
||||
* 4 Steppers: (0) (1) (2) (3)
|
||||
* | 4 3 | 1 4 | 2 1 | 3 2 |
|
||||
* | | | | |
|
||||
* | 1 2 | 2 3 | 3 4 | 4 1 |
|
||||
*
|
||||
*/
|
||||
#ifndef Z_STEPPER_ALIGN_XY
|
||||
//#define Z_STEPPERS_ORIENTATION 0
|
||||
#endif
|
||||
|
||||
// Provide Z stepper positions for more rapid convergence in bed alignment.
|
||||
// Currently requires triple stepper drivers.
|
||||
// Requires triple stepper drivers (i.e., set NUM_Z_STEPPER_DRIVERS to 3)
|
||||
//#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
|
||||
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
||||
// Define Stepper XY positions for Z1, Z2, Z3 corresponding to
|
||||
|
|
@ -680,23 +706,16 @@
|
|||
// Define one position per Z stepper in stepper driver order.
|
||||
#define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
|
||||
#else
|
||||
// Amplification factor. Used to scale the correction step up or down.
|
||||
// In case the stepper (spindle) position is further out than the test point.
|
||||
// Use a value > 1. NOTE: This may cause instability
|
||||
#define Z_STEPPER_ALIGN_AMP 1.0
|
||||
// Amplification factor. Used to scale the correction step up or down in case
|
||||
// the stepper (spindle) position is farther out than the test point.
|
||||
#define Z_STEPPER_ALIGN_AMP 1.0 // Use a value > 1.0 NOTE: This may cause instability!
|
||||
#endif
|
||||
|
||||
// Set number of iterations to align
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3
|
||||
|
||||
// Enable to restore leveling setup after operation
|
||||
#define RESTORE_LEVELING_AFTER_G34
|
||||
|
||||
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle
|
||||
|
||||
// Stop criterion. If the accuracy is better than this stop iterating early
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
|
||||
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
|
||||
#endif
|
||||
|
||||
// @section motion
|
||||
|
|
@ -821,8 +840,8 @@
|
|||
|
||||
// Define the pin to read during calibration
|
||||
#ifndef CALIBRATION_PIN
|
||||
#define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
|
||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
|
||||
//#define CALIBRATION_PIN -1 // Define here to override the default pin
|
||||
#define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
|
||||
//#define CALIBRATION_PIN_PULLDOWN
|
||||
#define CALIBRATION_PIN_PULLUP
|
||||
#endif
|
||||
|
|
@ -1314,9 +1333,11 @@
|
|||
//#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
|
||||
//#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
|
||||
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
|
||||
//#define S6_TFT_PINMAP // FYSETC S6 pin mapping
|
||||
|
||||
//#define OTHER_PIN_LAYOUT // Define pins manually below
|
||||
#if ENABLED(OTHER_PIN_LAYOUT)
|
||||
// The pins for CS and MOD_RESET (PD) must be chosen.
|
||||
// Pins for CS and MOD_RESET (PD) must be chosen
|
||||
#define CLCD_MOD_RESET 9
|
||||
#define CLCD_SPI_CS 10
|
||||
|
||||
|
|
@ -1426,6 +1447,7 @@
|
|||
*/
|
||||
//#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||
|
|
@ -1554,7 +1576,7 @@
|
|||
|
||||
// Add additional compensation depending on hotend temperature
|
||||
// Note: this values cannot be calibrated and have to be set manually
|
||||
#ifdef PROBE_TEMP_COMPENSATION
|
||||
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
||||
// Max temperature that can be reached by heated bed.
|
||||
// This is required only for the calibration process.
|
||||
#define PTC_MAX_BED_TEMP 110
|
||||
|
|
@ -2765,6 +2787,10 @@
|
|||
*/
|
||||
#define FASTER_GCODE_PARSER
|
||||
|
||||
#if ENABLED(FASTER_GCODE_PARSER)
|
||||
//#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
|
||||
#endif
|
||||
|
||||
/**
|
||||
* CNC G-code options
|
||||
* Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
|
||||
|
|
@ -3004,11 +3030,19 @@
|
|||
//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
|
||||
|
||||
#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
|
||||
#define WIFI_SSID "Wifi SSID"
|
||||
#define WIFI_PWD "Wifi Password"
|
||||
//#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
|
||||
//#define OTASUPPORT // Support over-the-air firmware updates
|
||||
//#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
|
||||
|
||||
/**
|
||||
* To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
|
||||
* the following defines, customized for your network. This specific file is excluded via
|
||||
* .gitignore to prevent it from accidentally leaking to the public.
|
||||
*
|
||||
* #define WIFI_SSID "WiFi SSID"
|
||||
* #define WIFI_PWD "WiFi Password"
|
||||
*/
|
||||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
141
Marlin/Makefile
141
Marlin/Makefile
|
|
@ -180,88 +180,93 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
|
||||
# MKS v1.5 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
# MKS v1.6 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
|
||||
# MKS GEN v1.3 or 1.4
|
||||
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
|
||||
# MKS GEN L
|
||||
# MKS GEN v1.3 or 1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
# MKS GEN L
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
|
||||
# BigTreeTech or BIQU KFB2.0
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
# BigTreeTech or BIQU KFB2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
|
||||
# Invent-A-Part RigidBoard
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
|
||||
# Invent-A-Part RigidBoard V2
|
||||
# Invent-A-Part RigidBoard
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
|
||||
# Sainsmart 2-in-1 board
|
||||
# Invent-A-Part RigidBoard V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
|
||||
# Ultimaker
|
||||
# Sainsmart 2-in-1 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
# Ultimaker
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
||||
MCU ?= atmega1280
|
||||
|
||||
# Azteeg X3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
|
||||
# Rumba
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
|
||||
# Raise3D Rumba
|
||||
# Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
|
||||
# Rapide Lite RL200 Rumba
|
||||
# Raise3D Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
|
||||
# Formbot T-Rex 2 Plus
|
||||
# Rapide Lite RL200 Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
|
||||
# Formbot T-Rex 3
|
||||
# Formbot T-Rex 2 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
|
||||
# Formbot Raptor
|
||||
# Formbot T-Rex 3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
|
||||
# Formbot Raptor 2
|
||||
# Formbot Raptor
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
|
||||
# bq ZUM Mega 3D
|
||||
# Formbot Raptor 2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
# bq ZUM Mega 3D
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
|
||||
# Creality: Ender-4, CR-8
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
# Creality: Ender-4, CR-8
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
|
||||
# Dagoma F5
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
|
||||
# FYSETC F6
|
||||
# Dagoma F5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
|
||||
# Duplicator i3 Plus
|
||||
# FYSETC F6 1.3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
|
||||
# VORON
|
||||
# FYSETC F6 1.5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
|
||||
# TRONXY V3 1.0
|
||||
# Duplicator i3 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
|
||||
# Z-Bolt X Series
|
||||
# VORON
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
|
||||
# TT OSCAR
|
||||
# TRONXY V3 1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
|
||||
# Overlord/Overlord Pro
|
||||
# Z-Bolt X Series
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
|
||||
# ADIMLab Gantry v1
|
||||
# TT OSCAR
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
|
||||
# ADIMLab Gantry v2
|
||||
# Overlord/Overlord Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
|
||||
# BIQU Tango V1
|
||||
# ADIMLab Gantry v1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1146)
|
||||
# MKS GEN L V2
|
||||
# ADIMLab Gantry v2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1147)
|
||||
# BIQU Tango V1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
|
||||
# MKS GEN L V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
|
||||
|
||||
#
|
||||
# RAMBo and derivatives
|
||||
|
|
@ -784,11 +789,11 @@ sym: $(BUILD_DIR)/$(TARGET).sym
|
|||
# Do not try to reset an Arduino if it's not one
|
||||
upload: $(BUILD_DIR)/$(TARGET).hex
|
||||
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
||||
stty hup < $(UPLOAD_PORT); true
|
||||
stty hup < $(UPLOAD_PORT); true
|
||||
endif
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
|
||||
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
||||
stty -hup < $(UPLOAD_PORT); true
|
||||
stty -hup < $(UPLOAD_PORT); true
|
||||
endif
|
||||
|
||||
# Display size of file.
|
||||
|
|
@ -796,10 +801,10 @@ HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
|
|||
ELFSIZE = $(SIZE) $(SIZE_FLAGS) $(BUILD_DIR)/$(TARGET).elf; \
|
||||
$(SIZE) $(BUILD_DIR)/$(TARGET).elf
|
||||
sizebefore:
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
|
||||
|
||||
sizeafter: build
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
||||
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
|
|
@ -811,71 +816,71 @@ COFFCONVERT=$(OBJCOPY) --debugging \
|
|||
|
||||
|
||||
coff: $(BUILD_DIR)/$(TARGET).elf
|
||||
$(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
|
||||
|
||||
extcoff: $(TARGET).elf
|
||||
$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
|
||||
|
||||
.SUFFIXES: .elf .hex .eep .lss .sym .bin
|
||||
.PRECIOUS: .o
|
||||
|
||||
.elf.hex:
|
||||
$(Pecho) " COPY $@"
|
||||
$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
$(Pecho) " COPY $@"
|
||||
$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
|
||||
.elf.bin:
|
||||
$(Pecho) " COPY $@"
|
||||
$P $(OBJCOPY) -O binary -R .eeprom $< $@
|
||||
$(Pecho) " COPY $@"
|
||||
$P $(OBJCOPY) -O binary -R .eeprom $< $@
|
||||
|
||||
.elf.eep:
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
.elf.lss:
|
||||
$(OBJDUMP) -h -S $< > $@
|
||||
$(OBJDUMP) -h -S $< > $@
|
||||
|
||||
# Create a symbol table from ELF output file.
|
||||
.elf.sym:
|
||||
$(NM) -n $< > $@
|
||||
$(NM) -n $< > $@
|
||||
|
||||
# Link: create ELF output file from library.
|
||||
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
|
||||
# Object files that were found in "src" will be stored in $(BUILD_DIR)
|
||||
# in directories that mirror the structure of "src"
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@
|
||||
|
||||
# Object files for Arduino libs will be created in $(BUILD_DIR)/arduino
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(LIBWARN) $< -o $@
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(LIBWARN) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.S $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@
|
||||
|
||||
# Target: clean project.
|
||||
clean:
|
||||
$(Pecho) " RMDIR $(BUILD_DIR)/"
|
||||
$P rm -rf $(BUILD_DIR)
|
||||
$(Pecho) " RMDIR $(BUILD_DIR)/"
|
||||
$P rm -rf $(BUILD_DIR)
|
||||
|
||||
|
||||
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
|
|
@ -53,8 +53,8 @@
|
|||
//#define analogInputToDigitalPin(IO) IO
|
||||
|
||||
#ifndef CRITICAL_SECTION_START
|
||||
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli()
|
||||
#define CRITICAL_SECTION_END SREG = _sreg
|
||||
#define CRITICAL_SECTION_START() unsigned char _sreg = SREG; cli()
|
||||
#define CRITICAL_SECTION_END() SREG = _sreg
|
||||
#endif
|
||||
#define ISRS_ENABLED() TEST(SREG, SREG_I)
|
||||
#define ENABLE_ISRS() sei()
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -60,6 +60,6 @@
|
|||
#error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
|
||||
#endif
|
||||
|
||||
#if TMC_HAS_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
|
||||
#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
|
||||
#error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,3 +1,24 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/* EEPROM emulation over flash with reduced wear
|
||||
*
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||
*
|
||||
|
|
@ -119,8 +119,8 @@ typedef int8_t pin_t;
|
|||
//
|
||||
// Interrupts
|
||||
//
|
||||
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
|
||||
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
|
||||
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
|
||||
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
|
||||
#define ISRS_ENABLED() (!__get_PRIMASK())
|
||||
#define ENABLE_ISRS() __enable_irq()
|
||||
#define DISABLE_ISRS() __disable_irq()
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -63,13 +63,13 @@ static pfnISR_Handler* get_relocated_table_addr() {
|
|||
memcpy(&ram_tab, romtab, sizeof(ram_tab));
|
||||
|
||||
// Disable global interrupts
|
||||
CRITICAL_SECTION_START;
|
||||
CRITICAL_SECTION_START();
|
||||
|
||||
// Set the vector table base address to the SRAM copy
|
||||
SCB->VTOR = (uint32_t)(&ram_tab);
|
||||
|
||||
// Reenable interrupts
|
||||
CRITICAL_SECTION_END;
|
||||
CRITICAL_SECTION_END();
|
||||
|
||||
// Return the address of the table
|
||||
return (pfnISR_Handler*)(&ram_tab);
|
||||
|
|
@ -80,7 +80,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
|
|||
pfnISR_Handler *isrtab = get_relocated_table_addr();
|
||||
|
||||
// Disable global interrupts
|
||||
CRITICAL_SECTION_START;
|
||||
CRITICAL_SECTION_START();
|
||||
|
||||
// Get the original handler
|
||||
pfnISR_Handler oldHandler = isrtab[irq + 16];
|
||||
|
|
@ -89,7 +89,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
|
|||
isrtab[irq + 16] = newHandler;
|
||||
|
||||
// Reenable interrupts
|
||||
CRITICAL_SECTION_END;
|
||||
CRITICAL_SECTION_END();
|
||||
|
||||
// Return the original one
|
||||
return oldHandler;
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -56,6 +56,6 @@
|
|||
#error "FAST_PWM_FAN is not yet implemented for this platform."
|
||||
#endif
|
||||
|
||||
#if TMC_HAS_SW_SERIAL
|
||||
#if HAS_TMC_SW_SERIAL
|
||||
#error "TMC220x Software Serial is not supported on this platform."
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
|
||||
*
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
*
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -172,6 +172,12 @@ void HAL_adc_init() {
|
|||
#if HAS_TEMP_ADC_5
|
||||
adc1_set_attenuation(get_channel(TEMP_5_PIN), ADC_ATTEN_11db);
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_6
|
||||
adc2_set_attenuation(get_channel(TEMP_6_PIN), ADC_ATTEN_11db);
|
||||
#endif
|
||||
#if HAS_TEMP_ADC_7
|
||||
adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db);
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db);
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
|
|
@ -65,8 +65,8 @@ extern portMUX_TYPE spinlock;
|
|||
#define NUM_SERIAL 1
|
||||
#endif
|
||||
|
||||
#define CRITICAL_SECTION_START portENTER_CRITICAL(&spinlock)
|
||||
#define CRITICAL_SECTION_END portEXIT_CRITICAL(&spinlock)
|
||||
#define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)
|
||||
#define CRITICAL_SECTION_END() portEXIT_CRITICAL(&spinlock)
|
||||
#define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL)
|
||||
#define ENABLE_ISRS() if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
|
||||
#define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -153,8 +153,8 @@ void stepperTask(void* parameter) {
|
|||
remaining--;
|
||||
}
|
||||
else {
|
||||
Stepper::stepper_pulse_phase_isr();
|
||||
remaining = Stepper::stepper_block_phase_isr();
|
||||
Stepper::pulse_phase_isr();
|
||||
remaining = Stepper::block_phase_isr();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -308,7 +308,7 @@ int i2s_init() {
|
|||
esp_intr_enable(i2s_isr_handle);
|
||||
|
||||
// Create the task that will feed the buffer
|
||||
xTaskCreate(stepperTask, "StepperTask", 10000, nullptr, 1, nullptr);
|
||||
xTaskCreatePinnedToCore(stepperTask, "StepperTask", 10000, nullptr, 1, nullptr, CONFIG_ARDUINO_RUNNING_CORE); // run I2S stepper task on same core as rest of Marlin
|
||||
|
||||
// Route the i2s pins to the appropriate GPIO
|
||||
gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -29,7 +29,7 @@
|
|||
#error "FAST_PWM_FAN is not yet implemented for this platform."
|
||||
#endif
|
||||
|
||||
#if TMC_HAS_SW_SERIAL
|
||||
#if HAS_TMC_SW_SERIAL
|
||||
#error "TMC220x Software Serial is not supported on this platform."
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -106,7 +106,7 @@ void HAL_timer_start(const uint8_t timer_num, uint32_t frequency) {
|
|||
|
||||
timer_enable_intr(timer.group, timer.idx);
|
||||
|
||||
timer_isr_register(timer.group, timer.idx, timer_isr, (void*)timer_num, 0, nullptr);
|
||||
timer_isr_register(timer.group, timer.idx, timer_isr, (void*)(uint32_t)timer_num, 0, nullptr);
|
||||
|
||||
timer_start(timer.group, timer.idx);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -26,6 +26,8 @@
|
|||
|
||||
#if BOTH(WIFISUPPORT, WEBSUPPORT)
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#undef DISABLED // esp32-hal-gpio.h
|
||||
#include <SPIFFS.h>
|
||||
#include "wifi.h"
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue