MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity

enable soft endstops for delta

Browse Source 
disable delta by default
This commit is contained in:
Jim Morris 2013-07-17 16:21:51 -07:00
parent d01ee7e7b5
commit fb20ceabce
1 changed files with 4 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/Configuration.h
View File

@ -73,8 +73,8 @@
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
// Enable DELTA kinematics
#define DELTA
// Enable DELTA kinematics and most of the default configuration for Deltas
//#define DELTA
// Make delta curves from many straight lines (linear interpolation).
// This is a trade-off between visible corners (not enough segments)
@ -338,17 +338,16 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define X_HOME_DIR 1
#define Y_HOME_DIR 1
#define Z_HOME_DIR 1
#define min_software_endstops false // If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops false // If true, axis won't move to coordinates greater than the defined lengths below.
#else
#define X_HOME_DIR -1
#define Y_HOME_DIR -1
#define Z_HOME_DIR -1
#endif // delta
#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
#endif // delta
// Travel limits after homing
#ifdef DELTA