From fd77251fdd3aed6d44f8fb0e3424d5237bc8e2d9 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 25 Feb 2021 10:24:58 -0600 Subject: [PATCH] Chamber followup --- Marlin/Configuration_adv.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0431b002f3..2846f9a675 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -151,12 +151,9 @@ #endif #if TEMP_SENSOR_CHAMBER - // Make sure you define where your heater is connected, the following works on a BTT SKR 1.4 Turbo - // using the secondary tool heater output. (FAN1 by default). - //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (SKR 1.4 Turbo specific) - //#define HEATER_CHAMBER_PIN P2_04 // Chamber heater on/off pin (HE1 connector on SKR 1.4 Turbo) - + //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false + //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN)