Commit Graph

Select branches

Hide Pull Requests

kitchen

Mono Color

• 80691206e7 Prevent moving up before homing kitchen Thomas Basler 2023-01-22 22:35:27 +0100
• 1d3a3c6f9c Move up Z axis by 2 mm after homing Thomas Basler 2023-01-22 22:26:06 +0100
• a37e10ea5b Enable Realtime Reporting Thomas Basler 2022-06-04 11:36:59 +0200
• 65efe5ab49 Enable Case Light for target laser Thomas Basler 2020-08-30 23:26:31 +0200
• 9411b6e615 Enabled joystick Thomas Basler 2020-08-28 19:38:46 +0200
• 1fe0f33586 Enable GCODE_MOTION_MODES Thomas Basler 2020-08-26 23:33:39 +0200
• aa29df99d0 Set G0 default feedrate Thomas Basler 2020-08-26 23:31:39 +0200
• b0e3c691c6 Enable G-Code comments Thomas Basler 2020-08-26 21:43:53 +0200
• 9b0b7c55c4 Enable CNC_WORKSPACE_PLANES Thomas Basler 2020-08-26 21:37:49 +0200
• 102d0f4fa4 Enable ARC_P_CIRCLES Thomas Basler 2021-11-21 18:02:04 +0100
• 91c4862878 Enable G5 support Thomas Basler 2020-08-26 21:36:57 +0200
• 11449c172d Enable spindle animation Thomas Basler 2020-08-26 21:32:21 +0200
• b25f9ef79f Made G38 working Thomas Basler 2020-02-23 00:23:25 +0100
• e18caa24e2 Disable not required z min softendstop Thomas Basler 2020-02-22 16:54:54 +0100
• 314fa3495b Don't move Z up if first homing Thomas Basler 2020-02-22 16:15:24 +0100
• 17c806ecdb Prevent moving up before homing Thomas Basler 2020-02-22 15:25:40 +0100
• cd3b57ff00 Disable move to center when homing z axis Thomas Basler 2020-02-22 15:09:07 +0100
• df96e3121e Invert z endstop logic Thomas Basler 2020-02-22 15:08:13 +0100
• 694fa9e53b Set correct z_homing offsets Thomas Basler 2020-02-22 14:50:18 +0100
• 184d79e19c Disable not required menu entries Thomas Basler 2020-02-17 19:55:47 +0100
• 17b140cf1d Disable NO_VOLUMETRICS Thomas Basler 2020-02-17 19:45:42 +0100
• 850bf82c5e Set correct axis direction Thomas Basler 2020-02-16 01:13:09 +0100
• 9b952d6abf Setup Max Feedrate Thomas Basler 2020-02-15 23:30:00 +0100
• 22526ba6ec Set correct acceleration Thomas Basler 2020-02-15 21:49:52 +0100
• eb3f8a4229 Set right Axis Steps Per Unit Thomas Basler 2020-02-15 17:28:56 +0100
• 36ff243c66 Enable hybrid threshold driver mode Thomas Basler 2020-02-13 23:02:11 +0100
• 71de7f9fff Enabled dual endstop Thomas Basler 2020-02-13 22:50:42 +0100
• 3422564493 Enable monitoring of driver status Thomas Basler 2020-02-13 22:40:27 +0100
• 1945a68628 Set stepper deative time to 30minutes Thomas Basler 2020-02-13 20:22:29 +0100
• 0667ec6b73 Enabled coolant control (vaccum and air) Thomas Basler 2020-02-05 20:55:53 +0100
• 50a96dbd68 Enable spindle feature and place it on output HE0 Thomas Basler 2020-02-05 20:40:23 +0100
• c6463a07d1 Set correct stepper driver type Thomas Basler 2020-02-05 19:35:53 +0100
• b912d1cad8 Added user defined menues Thomas Basler 2020-02-05 19:28:38 +0100
• 4053a22357 Enable G38 Thomas Basler 2020-02-05 19:26:29 +0100
• 9a6b87ab17 Add individual home menus Thomas Basler 2020-02-05 19:07:45 +0100
• 492df0c072 Invert encoder direction Thomas Basler 2020-02-05 19:07:17 +0100
• 9d833eab17 Enable inch mode Thomas Basler 2020-02-05 19:06:49 +0100
• b01d201eac Set custom machine name Thomas Basler 2020-02-05 18:58:46 +0100
• e41a589b8e Set Bed Size Thomas Basler 2020-02-05 18:50:01 +0100
• a60beda272 Enable graphic display Thomas Basler 2020-02-04 23:34:47 +0100
• 5b7707c02a Change language to german Thomas Basler 2020-02-04 23:32:51 +0100
• ac6f59fd84 Enable cnc coordinate systems Thomas Basler 2020-02-04 23:30:41 +0100
• 1710eedd65 Remove termal protection Thomas Basler 2020-02-04 23:25:11 +0100
• 12aaac1bf9 Enabled emergency parser Thomas Basler 2020-02-04 22:46:00 +0100
• 611baa0ced Enable eeprom support Thomas Basler 2020-02-04 22:42:53 +0100
• 473d354e7e Set the right serial port Thomas Basler 2020-02-04 22:40:22 +0100
• ae490e1e58 Set dummy temperature reading Thomas Basler 2020-02-04 22:17:13 +0100
• caa2172cc4 Set Extruder count to zero Thomas Basler 2020-08-26 13:02:20 +0200
• 9ab2270a6c Set correct CPU and board information Thomas Basler 2020-02-04 22:14:50 +0100
• 3334582f86 🔖 Version 2.1.2 Scott Lahteine 2022-12-19 14:42:28 -0600
• b2d72de494 📝 Update 2.1.x README Scott Lahteine 2022-12-18 17:22:11 -0600
• cfa747ed08 🧑‍💻 M593 F "min" freq Scott Lahteine 2022-12-18 15:48:47 -0600
• 92b2076dda 🐛 Fix Melzi encoder Scott Lahteine 2022-12-18 15:42:20 -0600
• eff6c407a5 🩹 Fix LCD_FOR_MELZI with Tronxy Melzi Scott Lahteine 2022-12-17 22:00:18 -0600
• 569bbb18d0 🐛 Fix DOGM time overflow, alignment (#25103) EvilGremlin 2022-12-17 07:45:55 +0300
• 471330b56e 🎨 Suppress warning (#25101) ellensp 2022-12-17 17:43:54 +1300
• 2a724bd94e ✨ BTT Octopus with STM32-F407 (#25031) ellensp 2022-12-17 10:01:14 +1300
• cea2ab1d7f ✨ BigTreeTech EBB42 v1.1 (#24964) alextrical 2022-12-16 20:45:14 +0000
• 5198a55457 🔧 Use multi-XYZ 'STOP' pins for MIN/MAX (#24855) ils15 2022-12-16 17:37:56 -0300
• cbb56e3536 ✨ Robin Nano v1 CDC (USB mod) Scott Lahteine 2022-08-24 10:15:57 -0500
• b3f4eaf6fd 🩹 Fix M115_GEOMETRY_REPORT (#25092) Dipl.-Ing. Raoul Rubien, BSc 2022-12-13 04:23:45 +0100
• 7815b20051 🩹 Inverted probe pin flag (K8400) (#25085) ellensp 2022-12-13 12:01:45 +1300
• ffbf6acd6c 🩹 Fix M502 init of default motion Scott Lahteine 2022-12-12 16:46:50 -0600
• 8bafc1d9ae 🩹 Use custom I2C pins for OLED (#24970) alextrical 2022-12-12 22:11:09 +0000
• ac05f0cb8b ✨ SAMD21 HAL / Minitronics v2.0 (#24976) Bart Meijer 2022-12-12 22:36:50 +0100
• ec6349f2ac ✨ TFT_COLOR_UI async DMA SPI (#24980) Alexander Gavrilenko 2022-12-13 00:13:31 +0300
• d082223fee 📝 Replace Twitter with Fosstodon Scott Lahteine 2022-12-11 19:46:55 -0600
• e07a059b2d 🔧 Anycubic alternate Z1/Z2 wiring (#25071) Simon Pilepich 2022-12-12 12:12:28 +1100
• 313716e7fc ✨ JyersUI TMC Settings (#25048) Krzysztof Błażewicz 2022-12-11 20:27:27 +0100
• 726555901c 🔧 Custom Menu Sanity Check (#25079) Keith Bennett 2022-12-11 10:59:25 -0800
• 3ad684b10b 🔨 Updated 'mfconfig init' Scott Lahteine 2022-12-11 12:56:45 -0600
• 408a53bcdd 🔨 No env:mega1280 for MIGHTYBOARD_REVE (#25080) ellensp 2022-12-11 06:44:09 +1300
• eae339b8dc ⚡️ Better IS buffer size calc (#25035) tombrazier 2022-12-10 17:28:48 +0000
• 79b88471f0 ✨ Two controller fans (#24995) Vovodroid 2022-12-10 17:03:54 +0200
• 86a3362bf6 📌 Pins updates for Longer LK5, etc. (#25012) ellensp 2022-12-11 04:00:51 +1300
• 0efeedf262 🚸 Progress display followup (#24879) EvilGremlin 2022-12-08 01:08:53 +0300
• c86f20010d ✨ M150 S default index (#23066) Sebastien BLAISOT 2022-12-07 22:49:38 +0100
• 5a97ffc414 🔨 Return error on mftest exit Scott Lahteine 2022-12-07 12:18:09 -0600
• 2737286021 📝 Update config comments Scott Lahteine 2022-12-05 11:01:08 -0600
• 86a10dc459 🐛 Fix Fast PWM on AVR (#25030) ellensp 2022-12-05 16:38:23 +1300
• ecdf07f055 ✏️ Fix missing ) (#25055) kisslorand 2022-12-05 00:04:11 +0200
• 686ce0c0e2 🔨 Fix CI Test clean step (2) Scott Lahteine 2022-12-04 15:35:45 -0600
• 3c550e0f19 🎨 Misc. cleanup Scott Lahteine 2022-12-03 20:49:46 -0600
• 071dae0c28 🔨 Fix CI Test clean step Scott Lahteine 2022-12-03 20:19:18 -0600
• df2a2488a8 🐛 Fix TMC5160 + Input Shaping overcurrent (#25050) tombrazier 2022-12-04 02:14:31 +0000
• c3090bd4e8 🩹 Ender 3v2 DWIN MarlinUI Fixup (#24984) Taylor Talkington 2022-12-03 20:20:19 -0500
• 0fadb56150 🎨 Trailing whitespace Scott Lahteine 2022-12-03 19:18:03 -0600
• eb125c95b6 🔨 Update renamed.ini (#25042) ellensp 2022-12-04 14:09:02 +1300
• 26edeefeb9 🩹 Fix MSG_MOVE_N_MM substitution (#25043) ellensp 2022-12-04 14:05:22 +1300
• 96b8c28376 🚸 G30 move to logical XY (#24953) kisslorand 2022-12-02 08:19:34 +0200
• db3865520f 🎨 Misc. cleanup Scott Lahteine 2022-12-01 23:39:17 -0600
• 51c1645ceb 🧑‍💻 Use spaces indent for Python Scott Lahteine 2022-10-12 17:52:56 -0500
• 5eb39d5277 📝 Formatted Team Overview (#25029) トトも 2022-11-27 23:52:06 -0500
• 0537e78572 🐛 Fix G-code resend race condition Scott Lahteine 2022-11-27 23:23:00 -0600
• 95019bf526 ✨ Ender-3 V2 DWIN for BTT Octopus V1.1 (#24983) Taylor Talkington 2022-11-27 22:41:27 -0500
• 6f5ad55953 ⚡️ More SCURVE cycles on unoptimized cortex-m0 (#24955) Chris Bagwell 2022-11-27 21:40:11 -0600
• 57f6c93192 ⚡️ Input Shaping improvements (#24951) tombrazier 2022-11-28 03:38:15 +0000
• d2ece1e713 🐛 Fix missing va_end in UnwPrintf (#25027) Trivalik 2022-11-28 02:06:44 +0100
• 12017887f4 🐛 Fix MILLISECONDS_PREHEAT_TIME / mintemp (#24967) studiodyne 2022-11-27 04:29:13 +0100
• 3a28a1fd1d 🩹 Fix ADVANCE_K + DISTINCT_E_FACTORS sanity check (#25007) Marcio T 2022-11-26 20:11:14 -0700