/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * IMPORTANT NOTE: * Rambo users should be sure to compile Marlin using either the RAMBo * board type if using the Arduino IDE - available via the link below - or * the 'rambo' environment if using platformio, by specifying '-e rambo' on * the command line or by changing the value of the 'env_default' variable to * 'rambo' in the supplied platformio.ini. * * If you don't compile using the proper board type, the RAMBo's extended * pins will likely be unavailable and accessories/addons may not work. * * Instructions for installing the Arduino RAMBo board type for the * Arduino IDE are available at: * https://reprap.org/wiki/Rambo_firmware */ /** * Rambo pin assignments */ #include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Rambo" #endif // // Servos // #ifndef SERVO0_PIN #define SERVO0_PIN 22 // Motor header MX1 #endif #define SERVO1_PIN 23 // Motor header MX2 #ifndef SERVO2_PIN #define SERVO2_PIN 24 // Motor header MX3 #endif #define SERVO3_PIN 5 // PWM header pin 5 // // Limit Switches // #define X_MIN_PIN 12 #define X_MAX_PIN 24 #define Y_MIN_PIN 11 #define Y_MAX_PIN 23 #ifndef Z_MIN_PIN #define Z_MIN_PIN 10 #endif #define Z_MAX_PIN 30 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN 30 #endif #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 5 #endif // // Steppers // #define X_STEP_PIN 37 #define X_DIR_PIN 48 #define X_ENABLE_PIN 29 #define Y_STEP_PIN 36 #define Y_DIR_PIN 49 #define Y_ENABLE_PIN 28 #define Z_STEP_PIN 35 #define Z_DIR_PIN 47 #define Z_ENABLE_PIN 27 #define E0_STEP_PIN 34 #define E0_DIR_PIN 43 #define E0_ENABLE_PIN 26 #define E1_STEP_PIN 33 #define E1_DIR_PIN 42 #define E1_ENABLE_PIN 25 // Microstepping pins - Mapping not from fastio.h (?) #define X_MS1_PIN 40 #define X_MS2_PIN 41 #define Y_MS1_PIN 69 #define Y_MS2_PIN 39 #define Z_MS1_PIN 68 #define Z_MS2_PIN 67 #define E0_MS1_PIN 65 #define E0_MS2_PIN 66 #define E1_MS1_PIN 63 #define E1_MS2_PIN 64 #define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } // X Y Z E0 E1 digipot channels to stepper driver mapping #ifndef DIGIPOT_MOTOR_CURRENT #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) #endif // // Temperature Sensors // #define TEMP_0_PIN 0 // Analog Input #define TEMP_1_PIN 1 // Analog Input #define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // #define HEATER_0_PIN 9 #define HEATER_1_PIN 7 #define HEATER_2_PIN 6 #define HEATER_BED_PIN 3 #ifndef FAN_PIN #define FAN_PIN 8 #endif #ifndef FAN1_PIN #define FAN1_PIN 6 #endif #ifndef FAN2_PIN #define FAN2_PIN 2 #endif // // Misc. Functions // #define SDSS 53 #define LED_PIN 13 #define PS_ON_PIN 4 #ifndef CASE_LIGHT_PIN #define CASE_LIGHT_PIN 46 #endif #ifndef FILWIDTH_PIN #define FILWIDTH_PIN 3 // Analog Input #endif // // M3/M4/M5 - Spindle/Laser Control // #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM #define SPINDLE_LASER_ENA_PIN 31 // Pullup! #define SPINDLE_DIR_PIN 32 // // SPI for Max6675 or Max31855 Thermocouple // #ifndef MAX6675_SS_PIN #define MAX6675_SS_PIN 32 // SPINDLE_DIR_PIN / STAT_LED_BLUE_PIN #endif // // M7/M8/M9 - Coolant Control // #define COOLANT_MIST_PIN 22 #define COOLANT_FLOOD_PIN 44 // // Průša i3 MK2 Multiplexer Support // #define E_MUX0_PIN 17 #define E_MUX1_PIN 16 #define E_MUX2_PIN 84 // 84 in MK2 Firmware // // LCD / Controller // #if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 80 #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL #define LCD_PINS_RS 70 #define LCD_PINS_ENABLE 71 #define LCD_PINS_D4 72 #define LCD_PINS_D5 73 #define LCD_PINS_D6 74 #define LCD_PINS_D7 75 #if ANY(VIKI2, miniVIKI) #define BEEPER_PIN 44 // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the // beeper/buzzer is connected to pin 33; however, the pin used in the // diagram is actually pin 44, so this is correct. #define DOGLCD_A0 70 #define DOGLCD_CS 71 #define LCD_SCREEN_ROT_180 #define BTN_EN1 85 #define BTN_EN2 84 #define BTN_ENC 83 #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define STAT_LED_RED_PIN 22 #define STAT_LED_BLUE_PIN 32 #else // !VIKI2 && !miniVIKI #define BEEPER_PIN 79 // AUX-4 // AUX-2 #ifndef BTN_EN1 #define BTN_EN1 76 #endif #ifndef BTN_EN2 #define BTN_EN2 77 #endif #define BTN_ENC 78 #define SD_DETECT_PIN 81 #endif // !VIKI2 && !miniVIKI #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder #endif #else // !IS_NEWPANEL - old style panel with shift register // No Beeper added #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK_PIN 38 //#define SHIFT_LD_PIN 42 //#define SHIFT_OUT_PIN 40 //#define SHIFT_EN_PIN 17 #define LCD_PINS_RS 75 #define LCD_PINS_ENABLE 17 #define LCD_PINS_D4 23 #define LCD_PINS_D5 25 #define LCD_PINS_D6 27 #define LCD_PINS_D7 29 #endif // !IS_NEWPANEL #endif // HAS_WIRED_LCD