/** * \file * * \brief Descriptors for an USB Composite Device * * Copyright (c) 2009-2016 Atmel Corporation. All rights reserved. * * \asf_license_start * * \page License * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of Atmel may not be used to endorse or promote products derived * from this software without specific prior written permission. * * 4. This software may only be redistributed and used in connection with an * Atmel microcontroller product. * * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * \asf_license_stop * */ /* * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM #include "conf_usb.h" #include "udd.h" #include "udc_desc.h" #if ENABLED(SDSUPPORT) /** * \defgroup udi_group_desc Descriptors for a USB Device * composite * * @{ */ /**INDENT-OFF**/ //! USB Device Descriptor COMPILER_WORD_ALIGNED UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = { .bLength = sizeof(usb_dev_desc_t), .bDescriptorType = USB_DT_DEVICE, .bcdUSB = LE16(USB_V2_0), .bDeviceClass = 0, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE, .idVendor = LE16(USB_DEVICE_VENDOR_ID), .idProduct = LE16(USB_DEVICE_PRODUCT_ID), .bcdDevice = LE16((USB_DEVICE_MAJOR_VERSION << 8) | USB_DEVICE_MINOR_VERSION), #ifdef USB_DEVICE_MANUFACTURE_NAME .iManufacturer = 1, #else .iManufacturer = 0, // No manufacture string #endif #ifdef USB_DEVICE_PRODUCT_NAME .iProduct = 2, #else .iProduct = 0, // No product string #endif #if (defined USB_DEVICE_SERIAL_NAME || defined USB_DEVICE_GET_SERIAL_NAME_POINTER) .iSerialNumber = 3, #else .iSerialNumber = 0, // No serial string #endif .bNumConfigurations = 1 }; #ifdef USB_DEVICE_HS_SUPPORT //! USB Device Qualifier Descriptor for HS COMPILER_WORD_ALIGNED UDC_DESC_STORAGE usb_dev_qual_desc_t udc_device_qual = { .bLength = sizeof(usb_dev_qual_desc_t), .bDescriptorType = USB_DT_DEVICE_QUALIFIER, .bcdUSB = LE16(USB_V2_0), .bDeviceClass = 0, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE, .bNumConfigurations = 1 }; #endif //! Structure for USB Device Configuration Descriptor COMPILER_PACK_SET(1) typedef struct { usb_conf_desc_t conf; UDI_COMPOSITE_DESC_T; } udc_desc_t; COMPILER_PACK_RESET() //! USB Device Configuration Descriptor filled for FS COMPILER_WORD_ALIGNED UDC_DESC_STORAGE udc_desc_t udc_desc_fs = { .conf.bLength = sizeof(usb_conf_desc_t), .conf.bDescriptorType = USB_DT_CONFIGURATION, .conf.wTotalLength = LE16(sizeof(udc_desc_t)), .conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE, .conf.bConfigurationValue = 1, .conf.iConfiguration = 0, .conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR, .conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER), UDI_COMPOSITE_DESC_FS }; #ifdef USB_DEVICE_HS_SUPPORT //! USB Device Configuration Descriptor filled for HS COMPILER_WORD_ALIGNED UDC_DESC_STORAGE udc_desc_t udc_desc_hs = { .conf.bLength = sizeof(usb_conf_desc_t), .conf.bDescriptorType = USB_DT_CONFIGURATION, .conf.wTotalLength = LE16(sizeof(udc_desc_t)), .conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE, .conf.bConfigurationValue = 1, .conf.iConfiguration = 0, .conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR, .conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER), UDI_COMPOSITE_DESC_HS }; #endif /** * \name UDC structures which contains all USB Device definitions */ //@{ //! Associate an UDI for each USB interface UDC_DESC_STORAGE udi_api_t *udi_apis[USB_DEVICE_NB_INTERFACE] = { UDI_COMPOSITE_API }; //! Add UDI with USB Descriptors FS UDC_DESC_STORAGE udc_config_speed_t udc_config_lsfs[1] = {{ .desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_fs, .udi_apis = udi_apis, }}; #ifdef USB_DEVICE_HS_SUPPORT //! Add UDI with USB Descriptors HS UDC_DESC_STORAGE udc_config_speed_t udc_config_hs[1] = {{ .desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_hs, .udi_apis = udi_apis, }}; #endif //! Add all information about USB Device in global structure for UDC UDC_DESC_STORAGE udc_config_t udc_config = { .confdev_lsfs = &udc_device_desc, .conf_lsfs = udc_config_lsfs, #ifdef USB_DEVICE_HS_SUPPORT .confdev_hs = &udc_device_desc, .qualifier = &udc_device_qual, .conf_hs = udc_config_hs, #endif }; //@} /**INDENT-ON**/ //@} #endif // ARDUINO_ARCH_SAM #endif // SDSUPPORT