/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #if NOT_TARGET(__STM32F1__, __STM32F4__) #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'" #endif /** * 2017 Victor Perez Marlin for stm32f1 test */ #define BOARD_INFO_NAME "Chitu3D" #define DEFAULT_MACHINE_NAME "STM32F103RET6" // Enable I2C_EEPROM for testing //#define I2C_EEPROM // Ignore temp readings during development. //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // // Steppers // #define X_STEP_PIN PE5 #define X_DIR_PIN PE6 #define X_ENABLE_PIN PC13 #define X_MIN_PIN PG10 #define X_MAX_PIN -1 #define Y_STEP_PIN PE2 #define Y_DIR_PIN PE3 #define Y_ENABLE_PIN PE4 #define Y_MIN_PIN PA12 #define Y_MAX_PIN #define Z_STEP_PIN PB9 #define Z_DIR_PIN PE0 #define Z_ENABLE_PIN PE1 #define Z_MIN_PIN PA14 #define Z_MAX_PIN -1 #define Y2_STEP_PIN -1 #define Y2_DIR_PIN -1 #define Y2_ENABLE_PIN -1 #define Z2_STEP_PIN -1 #define Z2_DIR_PIN -1 #define Z2_ENABLE_PIN -1 #define E0_STEP_PIN PB4 #define E0_DIR_PIN PB5 #define E0_ENABLE_PIN PB8 #define E1_STEP_PIN -1 #define E1_DIR_PIN -1 #define E1_ENABLE_PIN -1 #define E2_STEP_PIN -1 #define E2_DIR_PIN -1 #define E2_ENABLE_PIN -1 // // Misc. Functions // #define SDSS -1 #define LED_PIN -1 #ifndef CASE_LIGHT_PIN #define CASE_LIGHT_PIN PA8 // 8 #endif #define PS_ON_PIN -1 #define KILL_PIN PD6 // LED strip 24v // // Heaters / Fans // #define HEATER_0_PIN PD12 // HOT-END #define HEATER_1_PIN -1 #define HEATER_2_PIN -1 #define HEATER_BED_PIN PG11 // HOT-BED #define HEATER_BED2_PIN -1 // BED2 #define HEATER_BED3_PIN -1 // BED3 #ifndef FAN_PIN #define FAN_PIN PG14 // MAIN BOARD FAN #endif #define FAN_SOFT_PWM // // Temperature Sensors // #define TEMP_BED_PIN PA0 // Analog Input #define TEMP_0_PIN PA1 // Analog Input #define TEMP_1_PIN -1 // Analog Input #define TEMP_2_PIN -1 // Analog Input // // LCD Pins // #if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 #define LCD_PINS_D4 PB12 #define LCD_PINS_D5 PB13 #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 #else #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 #define LCD_PINS_D4 PB12 #define LCD_PINS_D5 PB13 #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 #if !IS_NEWPANEL #define BEEPER_PIN PC1 // 33 // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK PC6 // 38 //#define SHIFT_LD PC10 // 42 //#define SHIFT_OUT PC8 // 40 //#define SHIFT_EN PA1 // 17 #endif #endif #if IS_NEWPANEL #if IS_RRD_SC #define BEEPER_PIN PC5 #define BTN_EN1 PB15 // 31 #define BTN_EN2 PC1 // 33 #define BTN_ENC PC3 // 35 #define SD_DETECT_PIN PD1 // 49 #define KILL_PIN PC9 // 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define LCD_BACKLIGHT_PIN PC7 // 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define BTN_EN1 PE0 // 64 #define BTN_EN2 PD11 // 59 #define BTN_ENC PD15 // 63 #define SD_DETECT_PIN PC10 // 42 #elif ENABLED(LCD_I2C_PANELOLU2) #define BTN_EN1 PC15 // 47 #define BTN_EN2 PC11 // 43 #define BTN_ENC PC0 // 32 #define LCD_SDSS PD5 // 53 #define SD_DETECT_PIN -1 #define KILL_PIN PC9 // 41 #elif ENABLED(LCD_I2C_VIKI) #define BTN_EN1 PB6 // 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 #define LCD_SDSS PD5 // 53 #define SD_DETECT_PIN PD1 // 49 #elif ANY(VIKI2, miniVIKI) #define BEEPER_PIN PC1 // 33 // Pins for DOGM SPI LCD Support #define DOGLCD_A0 PC12 // 44 #define DOGLCD_CS PC13 // 45 #define LCD_SCREEN_ROT_180 #define BTN_EN1 PB6 // 22 #define BTN_EN2 PA7 // 7 #define BTN_ENC PC7 // 39 #define SDSS PD5 // 53 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define KILL_PIN PB15 // 31 #define STAT_LED_RED_PIN PC0 // 32 #define STAT_LED_BLUE_PIN PC3 // 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #define BTN_EN1 PC3 // 35 #define BTN_EN2 PC5 // 37 #define BTN_ENC PB15 // 31 #define SD_DETECT_PIN PD1 // 49 #define LCD_SDSS PD5 // 53 #define KILL_PIN PC9 // 41 #define BEEPER_PIN PB7 // 23 #define DOGLCD_CS PB13 // 29 #define DOGLCD_A0 PB11 // 27 #define LCD_BACKLIGHT_PIN PC1 // 33 #elif ENABLED(MINIPANEL) #define BEEPER_PIN PC10 // 42 // Pins for DOGM SPI LCD Support #define DOGLCD_A0 PC12 // 44 #define DOGLCD_CS PE2 // 66 #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65 #define SDSS PD5 // 53 #define KILL_PIN PE0 // 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button #define BTN_EN1 PC8 // 40 #define BTN_EN2 PD15 // 63 #define BTN_ENC PD11 // 59 // not connected to a pin #define SD_DETECT_PIN PD1 // 49 #else // Beeper on AUX-4 #define BEEPER_PIN PC1 // 33 // Buttons directly attached to AUX-2 #if IS_RRW_KEYPAD #define BTN_EN1 PE0 // 64 #define BTN_EN2 PD11 // 59 #define BTN_ENC PD15 // 63 #define SHIFT_OUT PC8 // 40 #define SHIFT_CLK PC12 // 44 #define SHIFT_LD PC10 // 42 #elif ENABLED(PANEL_ONE) #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 #define BTN_ENC PD1 // 49 // AUX3 PIN 7 #else #define BTN_EN1 PC5 // 37 #define BTN_EN2 PC3 // 35 #define BTN_ENC PB15 // 31 #endif #if ENABLED(G3D_PANEL) #define SD_DETECT_PIN PD1 // 49 #define KILL_PIN PC9 // 41 #else //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif #endif #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD