/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Arduino Mega for Tronxy X5S-2E, etc. */ #ifndef __AVR_ATmega2560__ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #elif HOTENDS > 2 || E_STEPPERS > 2 #error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue." #endif #define BOARD_INFO_NAME "TRONXY-V3-1.0" // // Servos // #define SERVO1_PIN 12 // 2560 PIN 25/PB6 // // Import RAMPS 1.4 pins // #include "pins_RAMPS.h" /** * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== AUX-1 connector ===== * * 2 4 6 8 * #----------------# * #2 | ° ° ° ° | * #1 | ° ° ° ° | * NOTCH #------ ------# * 1 3 5 7 * * ################################### * # Pin | ATMEGA2560 Pin | Arduino # * ################################### * # 1 | VCC | + # * # 2 | VCC | + # * # 3 | GND | - # * # 4 | GND | - # * # 5 | N/C | # * # 6 | 3 / PE1 (TXD0) | D1 # * # 7 | N/C | # * # 8 | 2 / PE0 (RXD0) | D0 # * ################################### * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== Limit Switch connectors ===== * * ############## X+ ################# * X+ # Pin | ATMEGA2560 Pin | Arduino # * 1 2 3 ################################### * #- --- -# # 1 | 6 / PE4 (INT4) | D2 # * | ° ° ° | # 2 | GND | - # * #-------# # 3 | VCC | + # * ################################### * * ############## X- ################# * X- # Pin | ATMEGA2560 Pin | Arduino # * 1 2 3 ################################### * #- --- -# # 1 | 7 / PE5 (INT5) | D3 # * | ° ° ° | # 2 | GND | - # * #-------# # 3 | VCC | + # * ################################### * * ############## Y+ ################# * Y+ # Pin | ATMEGA2560 Pin | Arduino # * 1 2 3 ################################### * #- --- -# # 1 | 63/PJ0 (PCINT9) | D15 # * | ° ° ° | # 2 | GND | - # * #-------# # 3 | VCC | + # * ################################### * * ############## Y- ################# * Y- # Pin | ATMEGA2560 Pin | Arduino # * 1 2 3 ################################### * #- --- -# # 1 | 64/PJ1 (PCINT10)| D14 # * | ° ° ° | # 2 | GND | - # * #-------# # 3 | VCC | + # * ################################### * * ############## Z+ ################# * Z+ # Pin | ATMEGA2560 Pin | Arduino # * 1 2 3 ################################### * #- --- -# # 1 | 45 / PD2 (INT2) | D19 # * | ° ° ° | # 2 | GND | - # * #-------# # 3 | VCC | + # * ################################### * * ############## Z- ################# * Z- # Pin | ATMEGA2560 Pin | Arduino # * 1 2 3 ################################### * #- --- -# # 1 | 46 / PD3 (INT3) | D18 # * | ° ° ° | # 2 | GND | - # * #-------# # 3 | VCC | + # * ################################### * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== EXP1/EXP2 connectors ===== * * (NOTE ORDER) EXP2 EXP1 * 2 4 6 8 10 2 4 6 8 10 * #-------------------# #-------------------# * #2 | ° ° ° ° ° | #2 | ° ° ° ° ° | * #1 | ° ° ° ° ° | #1 | ° ° ° ° ° | * NOTCH #-------- -------# NOTCH #-------- -------# * 1 3 5 7 9 1 3 5 7 9 * * ############# EXP1 ################ * # Pin | ATMEGA2560 Pin | Arduino # * ################################### * # 1 | 53 / PC0 | D37 # * # 2 | 55 / PC2 | D35 # * # 3 | 12 / PH0 (RXD2) | D17 # * # 4 | 13 / PH1 (TXD2) | D16 # * # 5 | 77 / PA1 | D23 # * # 6 | 75 / PA3 | D25 # * # 7 | 73 / PA5 | D27 # * # 8 | 71 / PA7 | D29 # * # 9 | GND | - # * # 10 | VCC | + # * ################################### * * ############# EXP2 ################ * # Pin | ATMEGA2560 Pin | Arduino # * ################################### * # 1 | 22 / PB3 (MISO) | D50 # * # 2 | 20 / PB1 (SCK) | D52 # * # 3 | 59 / PC6 | D31 # * # 4 | N/C | # * # 5 | 57 / PC4 | D33 # * # 6 | 21 / PB2 (MOSI) | D51 # * # 7 | N/C | # * # 8 | 30 / !RESET | RESET # * # 9 | GND | - # * # 10 | 51 / PG0 | D41 # * ################################### * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== ICSP connector ===== * * 2 4 6 * #---------# * | ° ° ° | * | ° ° ° | * #---------# * 1 3 5 * * ################################## * # Pin | ATMEGA2560 Pin | Arduino # * ################################## * # 1 | 22 / PB3 (MISO)| 50 # * # 2 | VCC | + # * # 3 | 20 / PB1 (SCK) | 52 # * # 4 | 21 / PB2 (MOSI)| 51 # * # 5 | 30 / !RESET | RESET # * # 6 | GND | - # * ################################## * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== SERVOS connector ===== * * 2 4 6 * #---------# * | ° ° ° | * | ° ° ° | * #---------# * 1 3 5 * * ################################## * # Pin | ATMEGA2560 Pin | Arduino # * ################################## * # 1 | 25 / PB6 (OC1B)| D12 # * # 2 | 24 / PB5 (OC1A)| D11 # * # 3 | GND | - # * # 4 | GND | - # * # 5 | VCC | + # * # 6 | VCC | + # * ################################## * * NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs. * * NOTE: Check servo wiring before connecting, for example: * + Airtronics (non-Z) use: Red = +; Black = -; Black & White, White or Orange = signal. * + Airtronics-Z use: Red = +; Black = -; Blue = signal. * + Futaba use: Red = +; Black = -; White = signal. * + Hitec use: Red = +; Black = -; Yellow = signal. * + JR use: Red = +; Brown = -; Orange = signal. * * NOTE: Test your servo limits: * Due to effects of component tolerances and/or age, the usable range of S-values for individual servos may be less than the settable 0-255 range. For example: * 1. One servo may have a fully usable range of M280 P0 S0 through M280 P0 S255. * 2. A different servo (of the same brand and model) may have a usable range of only M280 P0 S0 through M280 P0 S165 after which you experience binding. * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== Thermistor connectors ===== * * (NOTE ORDER) TH2 TH1 TB * 1 2 1 2 1 2 * #- -# #- -# #- -# * | ° ° | | ° ° | | ° ° | * #-----# #-----# #-----# * * ############## TB ################# * # Pin | ATMEGA2560 Pin | Arduino # * ################################### * # 1 | GND | - # * # 2 | 83 / PK6 (ADC14)| A14 # * ################################### * * ############## TH1 ################ * # Pin | ATMEGA2560 Pin | Arduino # * ################################### * # 1 | GND | - # * # 2 | 84 / PK5 (ADC13)| A13 # * ################################### * * ############## TH2 ################ * # Pin | ATMEGA2560 Pin | Arduino # * ################################### * # 1 | GND | - # * # 2 | 82 / PK7 (ADC15)| A15 # * ################################### * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ * * ===== XS3 connector ===== * * 2 4 6 * #---------# * | ° ° ° | * | ° ° ° | * #---------# * 1 3 5 * * ################################## * # Pin | ATMEGA2560 Pin | Arduino # * ################################## * # 1 | 85 / ADC12 | A12 # * # 2 | 86 / ADC11 | A11 # * # 3 | GND | - # * # 4 | GND | - # * # 5 | VCC | + # * # 6 | VCC | + # * ################################## * * NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs. * * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ */