/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Dutch * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html */ #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 namespace Language_nl { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 1; PROGMEM Language_Str LANGUAGE = _UxGT("Dutch"); PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" gereed."); PROGMEM Language_Str MSG_BACK = _UxGT("Terug"); PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Kaart ingestoken"); PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Kaart verwijderd"); PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters PROGMEM Language_Str MSG_MAIN = _UxGT("Hoofdmenu"); PROGMEM Language_Str MSG_AUTOSTART = _UxGT("Autostart"); PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Motoren uit"); PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Debug Menu"); // accepted English terms PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Vooruitgang Test"); PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Klik voor begin"); PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Volgende Plaats"); PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Bed level kompl."); PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Zet home offsets"); PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("H offset toegep."); PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Nulpunt instellen"); #if PREHEAT_COUNT PROGMEM Language_Str MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" voorverwarmen"); PROGMEM Language_Str MSG_PREHEAT_1_H = PREHEAT_1_LABEL _UxGT(" voorverw. ~"); PROGMEM Language_Str MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" voorverw. Einde"); PROGMEM Language_Str MSG_PREHEAT_1_END_E = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ~"); PROGMEM Language_Str MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" voorverw. aan"); PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" voorverw. Bed"); PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" verw. conf"); PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("$ voorverwarmen"); PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("$ voorverw. ~"); PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT("$ voorverw. Einde"); PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT("$ voorverw. Einde ~"); PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT("$ voorverw. aan"); PROGMEM Language_Str MSG_PREHEAT_M_BEDONLY = _UxGT("$ voorverw. Bed"); PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT("$ verw. conf"); #endif PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Afkoelen"); PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Stroom aan"); PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Stroom uit"); PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extrude"); PROGMEM Language_Str MSG_RETRACT = _UxGT("Retract"); PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("As verplaatsen"); PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Bed Leveling"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Level bed"); PROGMEM Language_Str MSG_MOVING = _UxGT("Verplaatsen..."); PROGMEM Language_Str MSG_FREE_XY = _UxGT("Vrij XY"); PROGMEM Language_Str MSG_MOVE_X = _UxGT("Verplaats X"); PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Verplaats Y"); PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Verplaats Z"); PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extruder"); PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Extruder *"); PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Verplaats %smm"); PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Verplaats 0.1mm"); PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Verplaats 1mm"); PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Verplaats 10mm"); PROGMEM Language_Str MSG_SPEED = _UxGT("Snelheid"); PROGMEM Language_Str MSG_BED_Z = _UxGT("Bed Z"); PROGMEM Language_Str MSG_NOZZLE = _UxGT("Nozzle"); PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~"); PROGMEM Language_Str MSG_BED = _UxGT("Bed"); PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan snelheid"); PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan snelheid ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Flow"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Control"); PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min"); PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max"); PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact"); PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp"); PROGMEM Language_Str MSG_LCD_ON = _UxGT("Aan"); PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Uit"); PROGMEM Language_Str MSG_SELECT = _UxGT("Selecteer"); PROGMEM Language_Str MSG_SELECT_E = _UxGT("Selecteer *"); PROGMEM Language_Str MSG_ACC = _UxGT("Versn"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatuur"); PROGMEM Language_Str MSG_MOTION = _UxGT("Beweging"); PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament"); PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K"); // accepted english dutch PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *"); // accepted english dutch PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm³"); PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *"); PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD contrast"); PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Geheugen opslaan"); PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Geheugen laden"); PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("Noodstop reset"); PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ververs"); PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("Info scherm"); PROGMEM Language_Str MSG_PREPARE = _UxGT("Voorbereiden"); PROGMEM Language_Str MSG_TUNE = _UxGT("Afstellen"); PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Print pauzeren"); PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Print hervatten"); PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Print stoppen"); PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print van SD"); PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Geen SD kaart"); PROGMEM Language_Str MSG_DWELL = _UxGT("Slapen..."); PROGMEM Language_Str MSG_USERWAIT = _UxGT("Wachten..."); PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Print afgebroken"); PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Geen beweging."); PROGMEM Language_Str MSG_KILLED = _UxGT("Afgebroken. "); PROGMEM Language_Str MSG_STOPPED = _UxGT("Gestopt. "); PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Retract mm"); // accepted English term in Dutch PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Ruil Retract mm"); PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Retract F"); PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("UnRet mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Ruil UnRet mm"); PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("UnRet F"); PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("AutoRetr."); PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Verv. Filament"); PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Verv. Filament *"); PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("Init. SD kaart"); PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Verv. SD Kaart"); PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z probe uit. bed"); PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Zelf-Test"); PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Home %s%s%s Eerst"); PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Z Offset"); // accepted English term in Dutch PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Babystap X"); PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Babystap Y"); PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Babystap Z"); PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Endstop afbr."); PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Voorverw. fout"); PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Redun. temp fout"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Therm. wegloop"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Max. temp"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Min. temp"); PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER GESTOPT"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset A.U.B."); PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // One character only PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // One character only PROGMEM Language_Str MSG_HEATING = _UxGT("Voorwarmen..."); PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Bed voorverw..."); PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Calibratie"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Kalibreer X"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibreer Y"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibreer Z"); PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibreer Midden"); PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("Auto Calibratie"); PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Zet Delta Hoogte"); PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Case licht"); PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT("Onjuiste printer"); #if LCD_WIDTH >= 20 PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Printed Aantal"); PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Totaal Voltooid"); PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Totale Printtijd"); PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Langste Printtijd"); PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Totaal Extrudeert"); #else PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Aantal"); PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Voltooid"); PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Printtijd "); PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Langste"); PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud."); #endif PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Min Temp"); PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); // accepted English term in Dutch PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Motorstroom"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC Opslaan"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Hervat print"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Nozzle: "); // accepted English term // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 // Up to 3 lines PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Wacht voor start", "filament te", "verwisselen")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament uit", "te laden")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Nozzle verw.", "Wacht a.u.b.")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Laad filament", "en druk knop", "om verder...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament te", "laden")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_3_LINE("Wacht voor print", "om verder", "te gaan")); #else // Up to 2 lines PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Wacht voor", "start...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Wacht voor", "uitladen...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Verwarmen...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("Laad filament", "en druk knop")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Wacht voor", "inladen...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Wacht voor", "printing...")); #endif }