/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * STM32F407VET6 with RAMPS-like shield * 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485 * Shield - https://github.com/jmz52/Hardware */ #if !defined(STM32F4) && !defined(STM32F4xx) #error "Oops! Select an STM32F4 board in 'Tools > Board.'" #elif HOTENDS > 2 || E_STEPPERS > 2 #error "Black STM32F4VET6 supports up to 2 hotends / E-steppers." #endif #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Black STM32F4VET6" #endif #define DEFAULT_MACHINE_NAME "STM32F407VET6" //#define I2C_EEPROM //#define E2END 0x1FFF // 8KB #define SRAM_EEPROM_EMULATION // // Servos // #define SERVO0_PIN PC6 #define SERVO1_PIN PC7 // // Limit Switches // #define X_MIN_PIN PC13 #define X_MAX_PIN PA15 #define Y_MIN_PIN PA5 #define Y_MAX_PIN PD12 #define Z_MIN_PIN PD14 #define Z_MAX_PIN PD15 // // Steppers // #define X_STEP_PIN PC4 #define X_DIR_PIN PA4 #define X_ENABLE_PIN PE7 #define Y_STEP_PIN PE5 #define Y_DIR_PIN PE2 #define Y_ENABLE_PIN PE6 #define Z_STEP_PIN PD5 #define Z_DIR_PIN PD3 #define Z_ENABLE_PIN PD6 #define E0_STEP_PIN PD7 #define E0_DIR_PIN PD0 #define E0_ENABLE_PIN PB9 #define E1_STEP_PIN PE0 #define E1_DIR_PIN PE1 #define E1_ENABLE_PIN PB8 // // Temperature Sensors // #define TEMP_0_PIN PC0 // T0 #define TEMP_1_PIN PC1 // T1 #define TEMP_BED_PIN PC2 // TB #ifndef TEMP_CHAMBER_PIN #define TEMP_CHAMBER_PIN PC3 // TC #endif // // Heaters / Fans // #define HEATER_0_PIN PA2 // Heater0 #define HEATER_1_PIN PA3 // Heater1 #define HEATER_BED_PIN PA1 // Hotbed #define FAN_PIN PE9 // Fan0 #define FAN1_PIN PE11 // Fan1 #define FAN2_PIN PE13 // Fan2 #define FAN3_PIN PE14 // Fan3 // // Misc. Functions // #define LED_PIN PA6 //#define LED_PIN PA7 #define KILL_PIN PB1 // // LCD / Controller // //#define SD_DETECT_PIN PC5 //#define SD_DETECT_PIN PA8 // SDIO SD_DETECT_PIN, external SDIO card reader only #define BEEPER_PIN PD10 #define LCD_PINS_RS PE15 #define LCD_PINS_ENABLE PD8 #define LCD_PINS_D4 PE10 #define LCD_PINS_D5 PE12 #define LCD_PINS_D6 PD1 #define LCD_PINS_D7 PE8 #define BTN_ENC PD9 #define BTN_EN1 PD4 #define BTN_EN2 PD13 #define DOGLCD_CS LCD_PINS_D5 #define DOGLCD_A0 LCD_PINS_D6 // // Onboard SD support // #define SDIO_D0_PIN PC8 #define SDIO_D1_PIN PC9 #define SDIO_D2_PIN PC10 #define SDIO_D3_PIN PC11 #define SDIO_CK_PIN PC12 #define SDIO_CMD_PIN PD2 #if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD #define SDIO_SUPPORT // Use SDIO for onboard SD #ifndef SDIO_SUPPORT #define SOFTWARE_SPI // Use soft SPI for onboard SD #define SDSS SDIO_D3_PIN #define SCK_PIN SDIO_CK_PIN #define MISO_PIN SDIO_D0_PIN #define MOSI_PIN SDIO_CMD_PIN #endif #endif