/** * Marlin 3D Printer Firmware * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * ultralcd_DOGM.h */ #include "../../inc/MarlinConfigPre.h" #include #include "HAL_LCD_class_defines.h" // LCD selection #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define U8G_CLASS U8GLIB_ST7920_128X64_4X #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN) #define U8G_PARAM LCD_PINS_RS #else #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS #endif #elif ENABLED(U8GLIB_ST7920) // RepRap Discount Full Graphics Smart Controller #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN) #define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL #define U8G_PARAM LCD_PINS_RS // 2 stripes, HW SPI (shared with SD card, on AVR does not use standard LCD adapter) #else //#define U8G_CLASS U8GLIB_ST7920_128X64_4X //#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS // Original u8glib device. 2 stripes, SW SPI #define U8G_CLASS U8GLIB_ST7920_128X64_RRD #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT // AVR version ignores these pin settings // HAL version uses these pin settings #endif #elif ENABLED(CARTESIO_UI) // The CartesioUI display //#define U8G_CLASS U8GLIB_DOGM128_2X //#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes #define U8G_CLASS U8GLIB_DOGM128_2X #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes #elif ENABLED(U8GLIB_LM6059_AF) // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250) //#define U8G_CLASS U8GLIB_LM6059 //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes #define U8G_CLASS U8GLIB_LM6059_2X #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes #elif ENABLED(U8GLIB_ST7565_64128N) // The MaKrPanel, Mini Viki, Viki 2.0 & AZSMZ 12864 ST7565 controller #define SMART_RAMPS (MB(RAMPS_SMART_EFB) || MB(RAMPS_SMART_EEB) || MB(RAMPS_SMART_EFF) || MB(RAMPS_SMART_EEF) || MB(RAMPS_SMART_SF)) #if DOGLCD_SCK == SCK_PIN && DOGLCD_MOSI == MOSI_PIN && !SMART_RAMPS #define U8G_CLASS U8GLIB_64128N_2X_HAL #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // using HW-SPI #else #define U8G_CLASS U8GLIB_64128N_2X_HAL #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // using SW-SPI #endif #elif ENABLED(MKS_12864OLED_SSD1306) // MKS 128x64 (SSD1306) OLED I2C LCD #define U8G_CLASS U8GLIB_SSD1306_128X64 #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 8 stripes //#define U8G_CLASS U8GLIB_SSD1306_128X64_2X //#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes #elif ENABLED(U8GLIB_SSD1306) // Generic support for SSD1306 OLED I2C LCDs //#define U8G_CLASS U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE //#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // 4 stripes #define U8G_CLASS U8GLIB_SSD1306_128X64_2X #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // 4 stripes #elif ENABLED(MKS_12864OLED) // MKS 128x64 (SH1106) OLED I2C LCD #define U8G_CLASS U8GLIB_SH1106_128X64 #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 8 stripes //#define U8G_CLASS U8GLIB_SH1106_128X64_2X //#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes #elif ENABLED(U8GLIB_SH1106) // Generic support for SH1106 OLED I2C LCDs //#define U8G_CLASS U8GLIB_SH1106_128X64_2X_I2C_2_WIRE //#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // 4 stripes #define U8G_CLASS U8GLIB_SH1106_128X64_2X #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // 4 stripes #elif ENABLED(U8GLIB_SSD1309) // Generic support for SSD1309 OLED I2C LCDs #define U8G_CLASS U8GLIB_SSD1309_128X64 #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) #elif ENABLED(MINIPANEL) // MINIPanel display //#define U8G_CLASS U8GLIB_MINI12864 //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes #define U8G_CLASS U8GLIB_MINI12864_2X #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes #elif ENABLED(FYSETC_MINI_12864) // The FYSETC_MINI_12864 display #define U8G_CLASS U8GLIB_MINI12864_2X_HAL #if ENABLED(FORCE_SOFT_SPI) #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes SW-SPI #else #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes HW-SPI #endif #elif ENABLED(U8GLIB_SH1106_EINSTART) // Connected via motherboard header #define U8G_CLASS U8GLIB_SH1106_128X64 #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS #elif ENABLED(MKS_ROBIN_TFT) // Unspecified 320x240 TFT pre-initialized by built-in bootloader #define U8G_CLASS U8GLIB_TFT_320X240_UPSCALE_FROM_128X64 #define U8G_PARAM FSMC_CS_PIN, FSMC_RS_PIN #else // for regular DOGM128 display with HW-SPI //#define U8G_CLASS U8GLIB_DOGM128 //#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // HW-SPI Com: CS, A0 // 8 stripes #define U8G_CLASS U8GLIB_DOGM128_2X #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // HW-SPI Com: CS, A0 // 4 stripes #endif #ifndef LCD_PIXEL_WIDTH #define LCD_PIXEL_WIDTH 128 #endif #ifndef LCD_PIXEL_HEIGHT #define LCD_PIXEL_HEIGHT 64 #endif // For selective rendering within a Y range #define PAGE_OVER(ya) ((ya) <= u8g.getU8g()->current_page.y1) // Does the current page follow a region top? #define PAGE_UNDER(yb) ((yb) >= u8g.getU8g()->current_page.y0) // Does the current page precede a region bottom? #define PAGE_CONTAINS(ya, yb) ((yb) >= u8g.getU8g()->current_page.y0 && (ya) <= u8g.getU8g()->current_page.y1) // Do two vertical regions overlap? // Only Western languages support big / small fonts #if DISABLED(DISPLAY_CHARSET_ISO10646_1) #undef USE_BIG_EDIT_FONT #undef USE_SMALL_INFOFONT #endif #define MENU_FONT_NAME ISO10646_1_5x7 #define MENU_FONT_WIDTH 6 #define MENU_FONT_ASCENT 10 #define MENU_FONT_DESCENT 2 #define MENU_FONT_HEIGHT (MENU_FONT_ASCENT + MENU_FONT_DESCENT) #if ENABLED(USE_BIG_EDIT_FONT) #define EDIT_FONT_NAME u8g_font_9x18 #define EDIT_FONT_WIDTH 9 #define EDIT_FONT_ASCENT 10 #define EDIT_FONT_DESCENT 3 #else #define EDIT_FONT_NAME MENU_FONT_NAME #define EDIT_FONT_WIDTH MENU_FONT_WIDTH #define EDIT_FONT_ASCENT MENU_FONT_ASCENT #define EDIT_FONT_DESCENT MENU_FONT_DESCENT #endif #define EDIT_FONT_HEIGHT (EDIT_FONT_ASCENT + EDIT_FONT_DESCENT) // Get the Ascent, Descent, and total Height for the Info Screen font #if ENABLED(USE_SMALL_INFOFONT) extern const u8g_fntpgm_uint8_t u8g_font_6x9[]; #define INFO_FONT_ASCENT 7 #else #define INFO_FONT_ASCENT 8 #endif #define INFO_FONT_DESCENT 2 #define INFO_FONT_HEIGHT (INFO_FONT_ASCENT + INFO_FONT_DESCENT) #define INFO_FONT_WIDTH 6 extern U8G_CLASS u8g;