/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * Adapted from Arduino Sd2Card Library * Copyright (c) 2009 by William Greiman */ /** * HAL for AVR - SPI functions */ #ifdef __AVR__ #include "../../inc/MarlinConfig.h" void spiBegin() { OUT_WRITE(SD_SS_PIN, HIGH); SET_OUTPUT(SD_SCK_PIN); SET_INPUT(SD_MISO_PIN); SET_OUTPUT(SD_MOSI_PIN); #if DISABLED(SOFTWARE_SPI) // SS must be in output mode even it is not chip select //SET_OUTPUT(SD_SS_PIN); // set SS high - may be chip select for another SPI device //#if SET_SPI_SS_HIGH //WRITE(SD_SS_PIN, HIGH); //#endif // set a default rate spiInit(1); #endif } #if NONE(SOFTWARE_SPI, FORCE_SOFT_SPI) // ------------------------ // Hardware SPI // ------------------------ // make sure SPCR rate is in expected bits #if (SPR0 != 0 || SPR1 != 1) #error "unexpected SPCR bits" #endif /** * Initialize hardware SPI * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] */ void spiInit(uint8_t spiRate) { // See avr processor documentation CBI( #ifdef PRR PRR #elif defined(PRR0) PRR0 #endif , PRSPI); SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1); SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X); } /** SPI receive a byte */ uint8_t spiRec() { SPDR = 0xFF; while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } return SPDR; } /** SPI read data */ void spiRead(uint8_t *buf, uint16_t nbyte) { if (nbyte-- == 0) return; SPDR = 0xFF; for (uint16_t i = 0; i < nbyte; i++) { while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } buf[i] = SPDR; SPDR = 0xFF; } while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } buf[nbyte] = SPDR; } /** SPI send a byte */ void spiSend(uint8_t b) { SPDR = b; while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } } /** SPI send block */ void spiSendBlock(uint8_t token, const uint8_t *buf) { SPDR = token; for (uint16_t i = 0; i < 512; i += 2) { while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } SPDR = buf[i]; while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } SPDR = buf[i + 1]; } while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } } /** begin spi transaction */ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { // Based on Arduino SPI library // Clock settings are defined as follows. Note that this shows SPI2X // inverted, so the bits form increasing numbers. Also note that // fosc/64 appears twice // SPR1 SPR0 ~SPI2X Freq // 0 0 0 fosc/2 // 0 0 1 fosc/4 // 0 1 0 fosc/8 // 0 1 1 fosc/16 // 1 0 0 fosc/32 // 1 0 1 fosc/64 // 1 1 0 fosc/64 // 1 1 1 fosc/128 // We find the fastest clock that is less than or equal to the // given clock rate. The clock divider that results in clock_setting // is 2 ^^ (clock_div + 1). If nothing is slow enough, we'll use the // slowest (128 == 2 ^^ 7, so clock_div = 6). uint8_t clockDiv; // When the clock is known at compiletime, use this if-then-else // cascade, which the compiler knows how to completely optimize // away. When clock is not known, use a loop instead, which generates // shorter code. if (__builtin_constant_p(spiClock)) { if (spiClock >= F_CPU / 2) clockDiv = 0; else if (spiClock >= F_CPU / 4) clockDiv = 1; else if (spiClock >= F_CPU / 8) clockDiv = 2; else if (spiClock >= F_CPU / 16) clockDiv = 3; else if (spiClock >= F_CPU / 32) clockDiv = 4; else if (spiClock >= F_CPU / 64) clockDiv = 5; else clockDiv = 6; } else { uint32_t clockSetting = F_CPU / 2; clockDiv = 0; while (clockDiv < 6 && spiClock < clockSetting) { clockSetting /= 2; clockDiv++; } } // Compensate for the duplicate fosc/64 if (clockDiv == 6) clockDiv = 7; // Invert the SPI2X bit clockDiv ^= 0x1; SPCR = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) | (dataMode << CPHA) | ((clockDiv >> 1) << SPR0); SPSR = clockDiv | 0x01; } #else // SOFTWARE_SPI || FORCE_SOFT_SPI // ------------------------ // Software SPI // ------------------------ // nop to tune soft SPI timing #define nop asm volatile ("\tnop\n") void spiInit(uint8_t) { /* do nothing */ } // Begin SPI transaction, set clock, bit order, data mode void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { /* do nothing */ } // Soft SPI receive byte uint8_t spiRec() { uint8_t data = 0; // no interrupts during byte receive - about 8µs cli(); // output pin high - like sending 0xFF WRITE(SD_MOSI_PIN, HIGH); LOOP_L_N(i, 8) { WRITE(SD_SCK_PIN, HIGH); nop; // adjust so SCK is nice nop; data <<= 1; if (READ(SD_MISO_PIN)) data |= 1; WRITE(SD_SCK_PIN, LOW); } sei(); return data; } // Soft SPI read data void spiRead(uint8_t *buf, uint16_t nbyte) { for (uint16_t i = 0; i < nbyte; i++) buf[i] = spiRec(); } // Soft SPI send byte void spiSend(uint8_t data) { // no interrupts during byte send - about 8µs cli(); LOOP_L_N(i, 8) { WRITE(SD_SCK_PIN, LOW); WRITE(SD_MOSI_PIN, data & 0x80); data <<= 1; WRITE(SD_SCK_PIN, HIGH); } nop; // hold SCK high for a few ns nop; nop; nop; WRITE(SD_SCK_PIN, LOW); sei(); } // Soft SPI send block void spiSendBlock(uint8_t token, const uint8_t *buf) { spiSend(token); for (uint16_t i = 0; i < 512; i++) spiSend(buf[i]); } #endif // SOFTWARE_SPI || FORCE_SOFT_SPI #endif // __AVR__