/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#include <Arduino.h>

#ifdef NUM_DIGITAL_PINS  // Only in ST's Arduino core (STM32duino, STM32Core)

/**
 *  Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order)
 *  because the variants in this platform do not always define all the I/O port/pins
 *  that a CPU has.
 *
 *  VARIABLES:
 *     Ard_num - Arduino pin number - defined by the platform. It is used by digitalRead and
 *               digitalWrite commands and by M42.
 *             - does not contain port/pin info
 *             - is not in port/pin order
 *             - typically a variant will only assign Ard_num to port/pins that are actually used
 *     Index - M43 counter - only used to get Ard_num
 *     x - a parameter/argument used to search the pin_array to try to find a signal name
 *         associated with a Ard_num
 *     Port_pin - port number and pin number for use with CPU registers and printing reports
 *
 *  Since M43 uses digitalRead and digitalWrite commands, only the Port_pins with an Ard_num
 *  are accessed and/or displayed.
 *
 *  Three arrays are used.
 *
 *  digitalPin[] is provided by the platform.  It consists of the Port_pin numbers in
 *  Arduino pin number order.
 *
 *  pin_array is a structure generated by the pins/pinsDebug.h header file.  It is generated by
 *  the preprocessor. Only the signals associated with enabled options are in this table.
 *  It contains:
 *    - name of the signal
 *    - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines.
 *        EXAMPLE:  "#define KILL_PIN  PB1" results in Ard_num of 57.  57 is then used as an
 *                  index into digitalPin[] to get the Port_pin number
 *    - if it is a digital or analog signal.  PWMs are considered digital here.
 *
 *  pin_xref is a structure generated by this header file.  It is generated by the
 *  preprocessor. It is in port/pin order.  It contains just the port/pin numbers defined by the
 *  platform for this variant.
 *    - Ard_num
 *    - printable version of Port_pin
 *
 *  Routines with an "x" as a parameter/argument are used to search the pin_array to try to
 *  find a signal name associated with a port/pin.
 *
 *  NOTE -  the Arduino pin number is what is used by the M42 command, NOT the port/pin for that
 *          signal.  The Arduino pin number is listed by the M43 I command.
 */

extern const PinName digitalPin[];  // provided by the platform

////////////////////////////////////////////////////////
//
// make a list of the Arduino pin numbers in the Port/Pin order
//

#define _PIN_ADD_2(NAME_ALPHA, ARDUINO_NUM) { {NAME_ALPHA}, ARDUINO_NUM },
#define _PIN_ADD(NAME_ALPHA, ARDUINO_NUM) { NAME_ALPHA, ARDUINO_NUM },
#define PIN_ADD(NAME) _PIN_ADD(#NAME, NAME)

typedef struct {
  char Port_pin_alpha[5];
  pin_t Ard_num;
} XrefInfo;

const XrefInfo pin_xref[] PROGMEM = {
  #include "pins_Xref.h"
};

////////////////////////////////////////////////////////////

#define MODE_PIN_INPUT  0 // Input mode (reset state)
#define MODE_PIN_OUTPUT 1 // General purpose output mode
#define MODE_PIN_ALT    2 // Alternate function mode
#define MODE_PIN_ANALOG 3 // Analog mode

#define PIN_NUM(P) (P & 0x000F)
#define PIN_NUM_ALPHA_LEFT(P) (((P & 0x000F) < 10) ? ('0' + (P & 0x000F)) : '1')
#define PIN_NUM_ALPHA_RIGHT(P) (((P & 0x000F) > 9)  ? ('0' + (P & 0x000F) - 10) : 0 )
#define PORT_NUM(P) ((P  >> 4) & 0x0007)
#define PORT_ALPHA(P) ('A' + (P  >> 4))

/**
 * Translation of routines & variables used by pinsDebug.h
 */
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL)
#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num)  // must use Arduino pin numbers when doing reads
#define PRINT_PIN(Q)
#define PRINT_PORT(ANUM) port_print(ANUM)
#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1  // will report analog pin number in the print port routine
#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num

// x is a variable used to search pin_array
#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin

#ifndef M43_NEVER_TOUCH
  #define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP)
  #ifdef KILL_PIN
    #define M43_NEVER_TOUCH(Index) m43_never_touch(Index)

    bool m43_never_touch(const pin_t Index) {
      static pin_t M43_kill_index = -1;
      if (M43_kill_index < 0)
        for (M43_kill_index = 0; M43_kill_index < NUMBER_PINS_TOTAL; M43_kill_index++)
          if (KILL_PIN == GET_PIN_MAP_PIN_M43(M43_kill_index)) break;
      return _M43_NEVER_TOUCH(Index) || Index == M43_kill_index; // KILL_PIN and SERIAL/USB
    }
  #else
    #define M43_NEVER_TOUCH(Index) _M43_NEVER_TOUCH(Index)
  #endif
#endif

uint8_t get_pin_mode(const pin_t Ard_num) {
  uint32_t mode_all = 0;
  const PinName dp = digitalPin[Ard_num];
  switch (PORT_ALPHA(dp)) {
    case 'A' : mode_all = GPIOA->MODER; break;
    case 'B' : mode_all = GPIOB->MODER; break;
    case 'C' : mode_all = GPIOC->MODER; break;
    case 'D' : mode_all = GPIOD->MODER; break;
    #ifdef PE_0
      case 'E' : mode_all = GPIOE->MODER; break;
    #elif defined (PF_0)
      case 'F' : mode_all = GPIOF->MODER; break;
    #elif defined (PG_0)
      case 'G' : mode_all = GPIOG->MODER; break;
    #elif defined (PH_0)
      case 'H' : mode_all = GPIOH->MODER; break;
    #elif defined (PI_0)
      case 'I' : mode_all = GPIOI->MODER; break;
    #elif defined (PJ_0)
      case 'J' : mode_all = GPIOJ->MODER; break;
    #elif defined (PK_0)
      case 'K' : mode_all = GPIOK->MODER; break;
    #elif defined (PL_0)
      case 'L' : mode_all = GPIOL->MODER; break;
    #endif
  }
  return (mode_all >> (2 * uint8_t(PIN_NUM(dp)))) & 0x03;
}

bool GET_PINMODE(const pin_t Ard_num) {
  const uint8_t pin_mode = get_pin_mode(Ard_num);
  return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT;  // assume all alt definitions are PWM
}

int8_t digital_pin_to_analog_pin(pin_t Ard_num) {
  Ard_num -= NUM_ANALOG_FIRST;
  return (Ard_num >= 0 && Ard_num < NUM_ANALOG_INPUTS) ? Ard_num : -1;
}

bool IS_ANALOG(const pin_t Ard_num) {
  return get_pin_mode(Ard_num) == MODE_PIN_ANALOG;
}

bool is_digital(const pin_t x) {
  const uint8_t pin_mode = get_pin_mode(pin_array[x].pin);
  return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT;
}

void port_print(const pin_t Ard_num) {
  char buffer[16];
  pin_t Index;
  for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++)
    if (Ard_num == GET_PIN_MAP_PIN_M43(Index)) break;

  char * const ppa = pin_xref[Index].Port_pin_alpha;
  sprintf_P(buffer, PSTR("%s"), ppa);
  SERIAL_ECHO(buffer);
  if (ppa[3] == '\0') SERIAL_CHAR(' ');

  // print analog pin number
  const int8_t Port_pin = digital_pin_to_analog_pin(Ard_num);
  if (Port_pin >= 0) {
    sprintf_P(buffer, PSTR(" (A%d) "), Port_pin);
    SERIAL_ECHO(buffer);
    if (Port_pin < 10) SERIAL_CHAR(' ');
  }
  else
    SERIAL_ECHO_SP(7);

  // Print number to be used with M42
  sprintf_P(buffer, PSTR(" M42 P%d "), Ard_num);
  SERIAL_ECHO(buffer);
  if (Ard_num < 10) SERIAL_CHAR(' ');
  if (Ard_num < 100) SERIAL_CHAR(' ');
}

bool pwm_status(const pin_t Ard_num) {
  return get_pin_mode(Ard_num) == MODE_PIN_ALT;
}

void pwm_details(const pin_t Ard_num) {
  if (pwm_status(Ard_num)) {
    uint32_t alt_all = 0;
    const PinName dp = digitalPin[Ard_num];
    pin_t pin_number = uint8_t(PIN_NUM(dp));
    const bool over_7 = pin_number >= 8;
    const uint8_t ind = over_7 ? 1 : 0;
    switch (PORT_ALPHA(dp)) {  // get alt function
      case 'A' : alt_all = GPIOA->AFR[ind]; break;
      case 'B' : alt_all = GPIOB->AFR[ind]; break;
      case 'C' : alt_all = GPIOC->AFR[ind]; break;
      case 'D' : alt_all = GPIOD->AFR[ind]; break;
      #ifdef PE_0
        case 'E' : alt_all = GPIOE->AFR[ind]; break;
      #elif defined (PF_0)
        case 'F' : alt_all = GPIOF->AFR[ind]; break;
      #elif defined (PG_0)
        case 'G' : alt_all = GPIOG->AFR[ind]; break;
      #elif defined (PH_0)
        case 'H' : alt_all = GPIOH->AFR[ind]; break;
      #elif defined (PI_0)
        case 'I' : alt_all = GPIOI->AFR[ind]; break;
      #elif defined (PJ_0)
        case 'J' : alt_all = GPIOJ->AFR[ind]; break;
      #elif defined (PK_0)
        case 'K' : alt_all = GPIOK->AFR[ind]; break;
      #elif defined (PL_0)
        case 'L' : alt_all = GPIOL->AFR[ind]; break;
      #endif
    }
    if (over_7) pin_number -= 8;

    uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F;
    SERIAL_ECHOPAIR("Alt Function: ", alt_func);
    if (alt_func < 10) SERIAL_CHAR(' ');
    SERIAL_ECHOPGM(" - ");
    switch (alt_func) {
      case  0 : SERIAL_ECHOPGM("system (misc. I/O)"); break;
      case  1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break;
      case  2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break;
      case  3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break;
      case  4 : SERIAL_ECHOPGM("I2C1..3"); break;
      case  5 : SERIAL_ECHOPGM("SPI1/SPI2"); break;
      case  6 : SERIAL_ECHOPGM("SPI3"); break;
      case  7 : SERIAL_ECHOPGM("USART1..3"); break;
      case  8 : SERIAL_ECHOPGM("USART4..6"); break;
      case  9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14  (probably PWM)"); break;
      case 10 : SERIAL_ECHOPGM("OTG"); break;
      case 11 : SERIAL_ECHOPGM("ETH"); break;
      case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break;
      case 13 : SERIAL_ECHOPGM("DCMI"); break;
      case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break;
      case 15 : SERIAL_ECHOPGM("EVENTOUT"); break;
    }
  }
} // pwm_details

#endif // NUM_DIGITAL_PINS