![luzpaz](/assets/img/avatar_default.png)
codespell -q 3 --builtin=clear,rare,informal,code -S ./Marlin/src/lcd/language -L alo,amin,endcode,stdio,uint
323 lines
14 KiB
C
323 lines
14 KiB
C
/*
|
|
*******************************************************************************
|
|
* Copyright (c) 2017, STMicroelectronics
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*******************************************************************************
|
|
*/
|
|
#pragma once
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif // __cplusplus
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Pins
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#ifdef STM32F405RX
|
|
#define STM32F4X_PIN_NUM 64 //64 pins mcu, 51 gpio
|
|
#define STM32F4X_GPIO_NUM 51
|
|
#define STM32F4X_ADC_NUM 16
|
|
#elif defined(STM32F407_5VX)
|
|
#define STM32F4X_PIN_NUM 100 //100 pins mcu, 82 gpio
|
|
#define STM32F4X_GPIO_NUM 82
|
|
#define STM32F4X_ADC_NUM 16
|
|
#elif defined(STM32F407_5ZX)
|
|
#define STM32F4X_PIN_NUM 144 //144 pins mcu, 114 gpio
|
|
#define STM32F4X_GPIO_NUM 114
|
|
#define STM32F4X_ADC_NUM 24
|
|
#elif defined(STM32F407IX)
|
|
#define STM32F4X_PIN_NUM 176 //176 pins mcu, 140 gpio
|
|
#define STM32F4X_GPIO_NUM 140
|
|
#define STM32F4X_ADC_NUM 24
|
|
#else
|
|
#error "no match MCU defined"
|
|
#endif
|
|
|
|
#if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio
|
|
#define PC13 0
|
|
#define PC14 1 //OSC32_IN
|
|
#define PC15 2 //OSC32_OUT
|
|
#define PH0 3 //OSC_IN
|
|
#define PH1 4 //OSC_OUT
|
|
#define PB2 5 //BOOT1
|
|
#define PB10 6 //1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3
|
|
#define PB11 7 //1:I2C2_SDA / USART3_RX / TIM2_CH4
|
|
#define PB12 8 //1:SPI2_NSS / OTG_HS_ID
|
|
#define PB13 9 //1:SPI2_SCK 2:OTG_HS_VBUS
|
|
#define PB14 10 //1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM
|
|
#define PB15 11 //SPI2_MOSI / TIM12_CH2 / OTG_HS_DP
|
|
#define PC6 12 //1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1
|
|
#define PC7 13 //1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2
|
|
#define PC8 14 //1:TIM8_CH3 / SDIO_D0 / TIM3_CH3
|
|
#define PC9 15 //1:TIM8_CH4 / SDIO_D1 / TIM3_CH4
|
|
#define PA8 16 //1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF
|
|
#define PA9 17 //1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS
|
|
#define PA10 18 //1:USART1_RX / TIM1_CH3 / OTG_FS_ID
|
|
#define PA11 19 //1:TIM1_CH4 / OTG_FS_DM
|
|
#define PA12 20 //1:OTG_FS_DP
|
|
#define PA13 21 //0:JTMS-SWDIO
|
|
#define PA14 22 //0:JTCK-SWCLK
|
|
#define PA15 23 //0:JTDI 1:SPI3_NSS / SPI1_NSS
|
|
#define PC10 24 //1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX
|
|
#define PC11 25 //1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX
|
|
#define PC12 26 //1:UART5_TX / SPI3_MOSI / SDIO_CK
|
|
#define PD2 27 //1:UART5_RX / SDIO_CMD
|
|
#define PB3 28 //0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK
|
|
#define PB4 29 //0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO
|
|
#define PB5 30 //1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI
|
|
#define PB6 31 //1:I2C1_SCL / TIM4_CH1 / USART1_TX
|
|
#define PB7 32 //1:I2C1_SDA / TIM4_CH2 / USART1_RX
|
|
#define PB8 33 //1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1
|
|
#define PB9 34 //1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS
|
|
#define PA0 35 //1:UART4_TX / TIM5_CH1 2:ADC123_IN0
|
|
#define PA1 36 //1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1
|
|
#define PA2 37 //1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2
|
|
#define PA3 38 //1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3
|
|
#define PA4 39 //NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1
|
|
#define PA5 40 //NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2
|
|
#define PA6 41 //1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6
|
|
#define PA7 42 //1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7
|
|
#define PB0 43 //1:TIM3_CH3 2:ADC12_IN8
|
|
#define PB1 44 //1:TIM3_CH4 2:ADC12_IN9
|
|
#define PC0 45 //1: 2:ADC123_IN10
|
|
#define PC1 46 //1: 2:ADC123_IN11
|
|
#define PC2 47 //1:SPI2_MISO 2:ADC123_IN12
|
|
#define PC3 48 //1:SPI2_MOSI 2:ADC123_IN13
|
|
#define PC4 49 //1: 2:ADC12_IN14
|
|
#define PC5 50 //1: 2:ADC12_IN15
|
|
#if STM32F4X_PIN_NUM >= 144
|
|
#define PF3 51 //1:FSMC_A3 2:ADC3_IN9
|
|
#define PF4 52 //1:FSMC_A4 2:ADC3_IN14
|
|
#define PF5 53 //1:FSMC_A5 2:ADC3_IN15
|
|
#define PF6 54 //1:TIM10_CH1 2:ADC3_IN4
|
|
#define PF7 55 //1:TIM11_CH1 2:ADC3_IN5
|
|
#define PF8 56 //1:TIM13_CH1 2:ADC3_IN6
|
|
#define PF9 57 //1;TIM14_CH1 2:ADC3_IN7
|
|
#define PF10 58 //2:ADC3_IN8
|
|
#endif
|
|
#endif
|
|
#if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio
|
|
#define PE2 (35+STM32F4X_ADC_NUM) //1:FSMC_A23
|
|
#define PE3 (36+STM32F4X_ADC_NUM) //1:FSMC_A19
|
|
#define PE4 (37+STM32F4X_ADC_NUM) //1:FSMC_A20
|
|
#define PE5 (38+STM32F4X_ADC_NUM) //1:FSMC_A21
|
|
#define PE6 (39+STM32F4X_ADC_NUM) //1:FSMC_A22
|
|
#define PE7 (40+STM32F4X_ADC_NUM) //1:FSMC_D4
|
|
#define PE8 (41+STM32F4X_ADC_NUM) //1:FSMC_D5
|
|
#define PE9 (42+STM32F4X_ADC_NUM) //1:FSMC_D6 / TIM1_CH1
|
|
#define PE10 (43+STM32F4X_ADC_NUM) //1:FSMC_D7
|
|
#define PE11 (44+STM32F4X_ADC_NUM) //1:FSMC_D8 / TIM1_CH2
|
|
#define PE12 (45+STM32F4X_ADC_NUM) //1:FSMC_D9
|
|
#define PE13 (46+STM32F4X_ADC_NUM) //1:FSMC_D10 / TIM1_CH3
|
|
#define PE14 (47+STM32F4X_ADC_NUM) //1:FSMC_D11 / TIM1_CH4
|
|
#define PE15 (48+STM32F4X_ADC_NUM) //1:FSMC_D12
|
|
#define PD8 (49+STM32F4X_ADC_NUM) //1:FSMC_D13 / USART3_TX
|
|
#define PD9 (50+STM32F4X_ADC_NUM) //1:FSMC_D14 / USART3_RX
|
|
#define PD10 (51+STM32F4X_ADC_NUM) //1:FSMC_D15
|
|
#define PD11 (52+STM32F4X_ADC_NUM) //1:FSMC_A16
|
|
#define PD12 (53+STM32F4X_ADC_NUM) //1:FSMC_A17 / TIM4_CH1
|
|
#define PD13 (54+STM32F4X_ADC_NUM) //1:FSMC_A18 / TIM4_CH2
|
|
#define PD14 (55+STM32F4X_ADC_NUM) //1:FSMC_D0 / TIM4_CH3
|
|
#define PD15 (56+STM32F4X_ADC_NUM) //1:FSMC_D1 / TIM4_CH4
|
|
#define PD0 (57+STM32F4X_ADC_NUM) //1:FSMC_D2
|
|
#define PD1 (58+STM32F4X_ADC_NUM) //1:FSMC_D3
|
|
#define PD3 (59+STM32F4X_ADC_NUM) //1:FSMC_CLK
|
|
#define PD4 (60+STM32F4X_ADC_NUM) //1:FSMC_NOE
|
|
#define PD5 (61+STM32F4X_ADC_NUM) //1:USART2_TX
|
|
#define PD6 (62+STM32F4X_ADC_NUM) //1:USART2_RX
|
|
#define PD7 (63+STM32F4X_ADC_NUM)
|
|
#define PE0 (64+STM32F4X_ADC_NUM)
|
|
#define PE1 (65+STM32F4X_ADC_NUM)
|
|
#endif
|
|
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
|
#define PF0 (66+STM32F4X_ADC_NUM) //1:FSMC_A0 / I2C2_SDA
|
|
#define PF1 (67+STM32F4X_ADC_NUM) //1:FSMC_A1 / I2C2_SCL
|
|
#define PF2 (68+STM32F4X_ADC_NUM) //1:FSMC_A2
|
|
#define PF11 (69+STM32F4X_ADC_NUM)
|
|
#define PF12 (70+STM32F4X_ADC_NUM) //1:FSMC_A6
|
|
#define PF13 (71+STM32F4X_ADC_NUM) //1:FSMC_A7
|
|
#define PF14 (72+STM32F4X_ADC_NUM) //1:FSMC_A8
|
|
#define PF15 (73+STM32F4X_ADC_NUM) //1:FSMC_A9
|
|
#define PG0 (74+STM32F4X_ADC_NUM) //1:FSMC_A10
|
|
#define PG1 (75+STM32F4X_ADC_NUM) //1:FSMC_A11
|
|
#define PG2 (76+STM32F4X_ADC_NUM) //1:FSMC_A12
|
|
#define PG3 (77+STM32F4X_ADC_NUM) //1:FSMC_A13
|
|
#define PG4 (78+STM32F4X_ADC_NUM) //1:FSMC_A14
|
|
#define PG5 (79+STM32F4X_ADC_NUM) //1:FSMC_A15
|
|
#define PG6 (80+STM32F4X_ADC_NUM)
|
|
#define PG7 (81+STM32F4X_ADC_NUM)
|
|
#define PG8 (82+STM32F4X_ADC_NUM)
|
|
#define PG9 (83+STM32F4X_ADC_NUM) //1:USART6_RX
|
|
#define PG10 (84+STM32F4X_ADC_NUM) //1:FSMC_NE3
|
|
#define PG11 (85+STM32F4X_ADC_NUM)
|
|
#define PG12 (86+STM32F4X_ADC_NUM) //1:FSMC_NE4
|
|
#define PG13 (87+STM32F4X_ADC_NUM) //1:FSMC_A24
|
|
#define PG14 (88+STM32F4X_ADC_NUM) //1:FSMC_A25 / USART6_TX
|
|
#define PG15 (89+STM32F4X_ADC_NUM)
|
|
#endif
|
|
#if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio
|
|
#define PI8 (90+STM32F4X_ADC_NUM)
|
|
#define PI9 (91+STM32F4X_ADC_NUM)
|
|
#define PI10 (92+STM32F4X_ADC_NUM)
|
|
#define PI11 (93+STM32F4X_ADC_NUM)
|
|
#define PH2 (94+STM32F4X_ADC_NUM)
|
|
#define PH3 (95+STM32F4X_ADC_NUM)
|
|
#define PH4 (96+STM32F4X_ADC_NUM) //1:I2C2_SCL
|
|
#define PH5 (97+STM32F4X_ADC_NUM) //1:I2C2_SDA
|
|
#define PH6 (98+STM32F4X_ADC_NUM) //1:TIM12_CH1
|
|
#define PH7 (99+STM32F4X_ADC_NUM) //1:I2C3_SCL
|
|
#define PH8 (100+STM32F4X_ADC_NUM) //1:I2C3_SDA
|
|
#define PH9 (101+STM32F4X_ADC_NUM) //1:TIM12_CH2
|
|
#define PH10 (102+STM32F4X_ADC_NUM) //1:TIM5_CH1
|
|
#define PH11 (103+STM32F4X_ADC_NUM) //1:TIM5_CH2
|
|
#define PH12 (104+STM32F4X_ADC_NUM) //1:TIM5_CH3
|
|
#define PH13 (105+STM32F4X_ADC_NUM)
|
|
#define PH14 (106+STM32F4X_ADC_NUM)
|
|
#define PH15 (107+STM32F4X_ADC_NUM)
|
|
#define PI0 (108+STM32F4X_ADC_NUM) //1:TIM5_CH4 / SPI2_NSS
|
|
#define PI1 (109+STM32F4X_ADC_NUM) //1:SPI2_SCK
|
|
#define PI2 (110+STM32F4X_ADC_NUM) //1:TIM8_CH4 /SPI2_MISO
|
|
#define PI3 (111+STM32F4X_ADC_NUM) //1:SPI2_MOS
|
|
#define PI4 (112+STM32F4X_ADC_NUM)
|
|
#define PI5 (113+STM32F4X_ADC_NUM) //1:TIM8_CH1
|
|
#define PI6 (114+STM32F4X_ADC_NUM) //1:TIM8_CH2
|
|
#define PI7 (115+STM32F4X_ADC_NUM) //1:TIM8_CH3
|
|
#endif
|
|
|
|
|
|
// This must be a literal
|
|
#define NUM_DIGITAL_PINS (STM32F4X_GPIO_NUM)
|
|
// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
|
|
#define NUM_ANALOG_INPUTS (STM32F4X_ADC_NUM)
|
|
#define NUM_ANALOG_FIRST 35
|
|
|
|
// Below ADC, DAC and PWM definitions already done in the core
|
|
// Could be redefined here if needed
|
|
// ADC resolution is 12bits
|
|
//#define ADC_RESOLUTION 12
|
|
//#define DACC_RESOLUTION 12
|
|
|
|
// PWM resolution
|
|
/*
|
|
* BEWARE:
|
|
* Changing this value from the default (1000) will affect the PWM output value of analogWrite (to a PWM pin)
|
|
* Since the pin is toggled on capture, if you change the frequency of the timer you have to adapt the compare value (analogWrite thinks you did)
|
|
*/
|
|
//#define PWM_FREQUENCY 20000
|
|
//The bottom values are the default and don't need to be redefined
|
|
//#define PWM_RESOLUTION 8
|
|
//#define PWM_MAX_DUTY_CYCLE 255
|
|
|
|
// On-board LED pin number
|
|
#define LED_BUILTIN PA7
|
|
#define LED_GREEN LED_BUILTIN
|
|
|
|
// Below SPI and I2C definitions already done in the core
|
|
// Could be redefined here if differs from the default one
|
|
// SPI Definitions
|
|
#define PIN_SPI_MOSI PB15
|
|
#define PIN_SPI_MISO PB14
|
|
#define PIN_SPI_SCK PB13
|
|
#define PIN_SPI_SS PB12
|
|
|
|
// I2C Definitions
|
|
#if STM32F4X_PIN_NUM >= 176
|
|
#define PIN_WIRE_SDA PH5
|
|
#define PIN_WIRE_SCL PH4
|
|
#else
|
|
#define PIN_WIRE_SDA PB7
|
|
#define PIN_WIRE_SCL PB6
|
|
#endif
|
|
|
|
// Timer Definitions
|
|
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
|
|
#define TIMER_TONE TIM10
|
|
#define TIMER_SERVO TIM5
|
|
#define TIMER_SERIAL TIM7
|
|
|
|
// UART Definitions
|
|
//#define ENABLE_HWSERIAL1 done automatically by the #define SERIAL_UART_INSTANCE below
|
|
#define ENABLE_HWSERIAL3
|
|
#define ENABLE_HWSERIAL6
|
|
|
|
// Define here Serial instance number to map on Serial generic name (if not already used by SerialUSB)
|
|
#define SERIAL_UART_INSTANCE 1 //1 for Serial = Serial1 (USART1)
|
|
|
|
// DEBUG_UART could be redefined to print on another instance than 'Serial'
|
|
//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3
|
|
// DEBUG_UART baudrate, default: 9600 if not defined
|
|
//#define DEBUG_UART_BAUDRATE x
|
|
// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
|
|
//#define DEBUG_PINNAME_TX PX_n // PinName used for TX
|
|
|
|
// Default pin used for 'Serial' instance (ex: ST-Link)
|
|
// Mandatory for Firmata
|
|
#define PIN_SERIAL_RX PA10
|
|
#define PIN_SERIAL_TX PA9
|
|
|
|
// Optional PIN_SERIALn_RX and PIN_SERIALn_TX where 'n' is the U(S)ART number
|
|
// Used when user instantiate a hardware Serial using its peripheral name.
|
|
// Example: HardwareSerial mySerial(USART3);
|
|
// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined.
|
|
#define PIN_SERIAL1_RX PA10
|
|
#define PIN_SERIAL1_TX PA9
|
|
#define PIN_SERIAL3_RX PD9
|
|
#define PIN_SERIAL3_TX PD8
|
|
#define PIN_SERIAL6_RX PC7
|
|
#define PIN_SERIAL6_TX PC6
|
|
//#define PIN_SERIALLP1_RX x // For LPUART1 RX
|
|
//#define PIN_SERIALLP1_TX x // For LPUART1 TX
|
|
|
|
#ifdef __cplusplus
|
|
} // extern "C"
|
|
#endif
|
|
/*----------------------------------------------------------------------------
|
|
* Arduino objects - C++ only
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#ifdef __cplusplus
|
|
// These serial port names are intended to allow libraries and architecture-neutral
|
|
// sketches to automatically default to the correct port name for a particular type
|
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
|
//
|
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
|
//
|
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
|
//
|
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
|
//
|
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
|
//
|
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
|
// pins are NOT connected to anything by default.
|
|
#define SERIAL_PORT_MONITOR Serial
|
|
#define SERIAL_PORT_HARDWARE Serial1
|
|
#define SERIAL_PORT_HARDWARE_OPEN Serial3
|
|
#define SERIAL_PORT_HARDWARE_OPEN1 Serial6
|
|
#endif
|