386 lines
13 KiB
C
386 lines
13 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
#define ALLOW_STM32DUINO
|
|
#include "env_validate.h"
|
|
|
|
#if HOTENDS > 3 || E_STEPPERS > 5
|
|
#error "MKS Monster supports up to 3 hotends and 5 E-steppers."
|
|
#elif HAS_FSMC_TFT
|
|
#error "MKS Monster doesn't support FSMC-based TFT displays."
|
|
#endif
|
|
|
|
#define BOARD_INFO_NAME "MKS Monster8 V1.x"
|
|
|
|
#define HAS_OTG_USB_HOST_SUPPORT // USB Flash Drive support
|
|
#define USES_DIAG_JUMPERS
|
|
|
|
//#define DISABLE_DEBUG
|
|
|
|
// Avoid conflict with TIMER_TONE
|
|
#define STEP_TIMER 10
|
|
|
|
// Use one of these or SDCard-based Emulation will be used
|
|
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
|
|
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
|
|
#define I2C_EEPROM // Need use jumpers set i2c for EEPROM
|
|
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
|
|
#define I2C_SCL_PIN PB8 // I2C_SCL and CAN_RX
|
|
#define I2C_SDA_PIN PB9 // I2C_SDA and CAN_TX
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN PA8 // Enable BLTOUCH
|
|
|
|
//
|
|
// Limit Switches for diag signal
|
|
//
|
|
#define X_DIAG_PIN PA14 // Driver0 diag signal is connect to X-
|
|
#define Y_DIAG_PIN PA15 // Driver1 diag signal is connect to Y-
|
|
#define Z_DIAG_PIN PB13 // Driver2 diag signal is connect to Z-
|
|
#define E0_DIAG_PIN PA13 // Driver3 diag signal is connect to X+
|
|
#define E1_DIAG_PIN PC5 // Driver4 diag signal is connect to Y+
|
|
#define E2_DIAG_PIN PB12 // Driver5 diag signal is connect to Z+
|
|
#define E3_DIAG_PIN -1 // Driver6 diag signal is not connect
|
|
#define E4_DIAG_PIN -1 // Driver7 diag signal is not connect
|
|
|
|
// Limit Switches for endstop
|
|
#define X_MIN_PIN PA14
|
|
#define X_MAX_PIN PA13
|
|
#define Y_MIN_PIN PA15
|
|
#define Y_MAX_PIN PC5
|
|
#define Z_MIN_PIN PB13
|
|
#define Z_MAX_PIN PB12
|
|
|
|
//
|
|
// Steppers
|
|
// Driver 0 1 2 3 4 5 6 7
|
|
// For X Y Z E0 E1 E2 E3 E4(default pin settings)
|
|
//
|
|
//Driver0
|
|
#define X_ENABLE_PIN PC15
|
|
#define X_STEP_PIN PC14
|
|
#define X_DIR_PIN PC13
|
|
#ifndef X_CS_PIN
|
|
#define X_CS_PIN PE6
|
|
#endif
|
|
//Driver1
|
|
#define Y_ENABLE_PIN PC15
|
|
#define Y_STEP_PIN PE5
|
|
#define Y_DIR_PIN PE4
|
|
#ifndef Y_CS_PIN
|
|
#define Y_CS_PIN PE3
|
|
#endif
|
|
//Driver2
|
|
#define Z_ENABLE_PIN PE2
|
|
#define Z_STEP_PIN PE1
|
|
#define Z_DIR_PIN PE0
|
|
#ifndef Z_CS_PIN
|
|
#define Z_CS_PIN PB7
|
|
#endif
|
|
//Driver3
|
|
#define E0_ENABLE_PIN PB6
|
|
#define E0_STEP_PIN PB5
|
|
#define E0_DIR_PIN PB4
|
|
#ifndef E0_CS_PIN
|
|
#define E0_CS_PIN PB3
|
|
#endif
|
|
//Driver4
|
|
#define E1_ENABLE_PIN PD7
|
|
#define E1_STEP_PIN PD6
|
|
#define E1_DIR_PIN PD5
|
|
#ifndef E1_CS_PIN
|
|
#define E1_CS_PIN PD4
|
|
#endif
|
|
//Driver5
|
|
#define E2_ENABLE_PIN PD3
|
|
#define E2_STEP_PIN PD2
|
|
#define E2_DIR_PIN PD1
|
|
#ifndef E2_CS_PIN
|
|
#define E2_CS_PIN PD0
|
|
#endif
|
|
//Driver6
|
|
#define E3_ENABLE_PIN PC8
|
|
#define E3_STEP_PIN PC7
|
|
#define E3_DIR_PIN PC6
|
|
#ifndef E3_CS_PIN
|
|
#define E3_CS_PIN PD15
|
|
#endif
|
|
//Driver7
|
|
#define E4_ENABLE_PIN PD14
|
|
#define E4_STEP_PIN PD13
|
|
#define E4_DIR_PIN PD12
|
|
#ifndef E4_CS_PIN
|
|
#define E4_CS_PIN PD11
|
|
#endif
|
|
|
|
//
|
|
// Software SPI pins for TMC2130 stepper drivers
|
|
// This board only supports SW SPI for stepper drivers
|
|
//
|
|
#if HAS_TMC_SPI
|
|
#define TMC_USE_SW_SPI
|
|
#endif
|
|
#if ENABLED(TMC_USE_SW_SPI)
|
|
#if !defined(TMC_SW_MOSI) || TMC_SW_MOSI == -1
|
|
#define TMC_SW_MOSI PE14
|
|
#endif
|
|
#if !defined(TMC_SW_MISO) || TMC_SW_MISO == -1
|
|
#define TMC_SW_MISO PE13
|
|
#endif
|
|
#if !defined(TMC_SW_SCK) || TMC_SW_SCK == -1
|
|
#define TMC_SW_SCK PE12
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_TMC_UART
|
|
//
|
|
// Software serial
|
|
// No Hardware serial for steppers
|
|
//
|
|
#define X_SERIAL_TX_PIN PE6
|
|
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
|
|
|
|
#define Y_SERIAL_TX_PIN PE3
|
|
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
|
|
|
|
#define Z_SERIAL_TX_PIN PB7
|
|
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
|
|
|
|
#define E0_SERIAL_TX_PIN PB3
|
|
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
|
|
|
|
#define E1_SERIAL_TX_PIN PD4
|
|
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
|
|
|
|
#define E2_SERIAL_TX_PIN PD0
|
|
#define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
|
|
|
|
#define E3_SERIAL_TX_PIN PD15
|
|
#define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
|
|
|
|
#define E4_SERIAL_TX_PIN PD11
|
|
#define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
|
|
|
|
// Reduce baud rate to improve software serial reliability
|
|
#define TMC_BAUD_RATE 19200
|
|
#endif
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN PC1 // TH0
|
|
#define TEMP_1_PIN PC2 // TH1
|
|
#define TEMP_2_PIN PC3 // TH2
|
|
#define TEMP_BED_PIN PC0 // TB
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN PB1 // HE0
|
|
#define HEATER_1_PIN PB0 // HE1
|
|
#define HEATER_2_PIN PA3 // HE2
|
|
#define HEATER_BED_PIN PB10 // H-BED
|
|
|
|
#define FAN_PIN PA2 // FAN0
|
|
#define FAN1_PIN PA1 // FAN1
|
|
#define FAN2_PIN PA0 // FAN2
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define PW_DET PC5 // Y+
|
|
#define PW_OFF PB12 // Z+
|
|
#define MT_DET_1_PIN PW_DET
|
|
#define MT_DET_2_PIN PW_OFF
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN MT_DET_1_PIN
|
|
#endif
|
|
#ifndef FIL_RUNOUT2_PIN
|
|
#define FIL_RUNOUT2_PIN MT_DET_2_PIN
|
|
#endif
|
|
|
|
//
|
|
// Power Supply Control
|
|
//
|
|
#if ENABLED(MKS_PWC)
|
|
#define PS_ON_PIN PW_OFF
|
|
#define KILL_PIN PW_DET
|
|
#define KILL_PIN_STATE HIGH
|
|
#endif
|
|
|
|
// Random Info
|
|
#define USB_SERIAL -1 // USB Serial
|
|
|
|
/**
|
|
* ------ ------
|
|
* (BEEPER) PB2 |10 9 | PE10 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK)
|
|
* (LCD_EN) PE11 | 8 7 | PD10 (LCD_RS) (BTN_EN1) PE9 | 8 7 | PA4 (SPI1 CS)
|
|
* (LCD_D4) PD9 6 5 | PD8 (LCD_D5) (BTN_EN2) PE8 6 5 | PA7 (SPI1 MOSI)
|
|
* (LCD_D6) PE15 | 4 3 | PE7 (LCD_D7) (SPI1_RS) PB11 | 4 3 | RESET
|
|
* GND | 2 1 | 5V GND | 2 1 | 3.3V
|
|
* ------ ------
|
|
* EXP1 EXP2
|
|
*/
|
|
#define EXP1_03_PIN PE7
|
|
#define EXP1_04_PIN PE15
|
|
#define EXP1_05_PIN PD8
|
|
#define EXP1_06_PIN PD9
|
|
#define EXP1_07_PIN PD10
|
|
#define EXP1_08_PIN PE11
|
|
#define EXP1_09_PIN PE10
|
|
#define EXP1_10_PIN PB2
|
|
|
|
#define EXP2_03_PIN -1 // RESET
|
|
#define EXP2_04_PIN PB11
|
|
#define EXP2_05_PIN PA7
|
|
#define EXP2_06_PIN PE8
|
|
#define EXP2_07_PIN PA4
|
|
#define EXP2_08_PIN PE9
|
|
#define EXP2_09_PIN PA5
|
|
#define EXP2_10_PIN PA6
|
|
|
|
#ifndef SDCARD_CONNECTION
|
|
#define SDCARD_CONNECTION ONBOARD
|
|
#endif
|
|
|
|
#if SD_CONNECTION_IS(ONBOARD)
|
|
#define ENABLE_SPI3
|
|
#define SD_SS_PIN -1
|
|
#define SDSS PC9
|
|
#define SD_SCK_PIN PC10
|
|
#define SD_MISO_PIN PC11
|
|
#define SD_MOSI_PIN PC12
|
|
#define SD_DETECT_PIN PC4 // SD_DETECT_PIN doesn't work with NO_SD_HOST_DRIVE disabled
|
|
#elif SD_CONNECTION_IS(LCD)
|
|
#define ENABLE_SPI1
|
|
#define SDSS EXP2_07_PIN
|
|
#define SD_SCK_PIN EXP2_09_PIN
|
|
#define SD_MISO_PIN EXP2_10_PIN
|
|
#define SD_MOSI_PIN EXP2_05_PIN
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
#endif
|
|
|
|
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI)
|
|
#define TFT_CS_PIN EXP1_04_PIN
|
|
#define TFT_SCK_PIN EXP2_09_PIN
|
|
#define TFT_MISO_PIN EXP2_10_PIN
|
|
#define TFT_MOSI_PIN EXP2_05_PIN
|
|
#define TFT_DC_PIN EXP1_03_PIN
|
|
#define TFT_RST_PIN EXP1_07_PIN
|
|
#define TFT_A0_PIN TFT_DC_PIN
|
|
|
|
#define TFT_RESET_PIN EXP1_07_PIN
|
|
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
|
|
|
|
#define TOUCH_BUTTONS_HW_SPI
|
|
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
|
|
|
|
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
|
|
#ifndef TFT_WIDTH
|
|
#define TFT_WIDTH 480
|
|
#endif
|
|
#ifndef TFT_HEIGHT
|
|
#define TFT_HEIGHT 320
|
|
#endif
|
|
|
|
#define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS
|
|
#define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK
|
|
#define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO
|
|
#define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI
|
|
|
|
#define LCD_READ_ID 0xD3
|
|
#define LCD_USE_DMA_SPI
|
|
|
|
#define TFT_BUFFER_SIZE 14400
|
|
|
|
#ifndef TOUCH_CALIBRATION_X
|
|
#define TOUCH_CALIBRATION_X -17253
|
|
#endif
|
|
#ifndef TOUCH_CALIBRATION_Y
|
|
#define TOUCH_CALIBRATION_Y 11579
|
|
#endif
|
|
#ifndef TOUCH_OFFSET_X
|
|
#define TOUCH_OFFSET_X 514
|
|
#endif
|
|
#ifndef TOUCH_OFFSET_Y
|
|
#define TOUCH_OFFSET_Y -24
|
|
#endif
|
|
#ifndef TOUCH_ORIENTATION
|
|
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
|
|
#endif
|
|
|
|
#elif HAS_WIRED_LCD
|
|
|
|
#define LCD_PINS_ENABLE EXP1_08_PIN
|
|
#define LCD_PINS_RS EXP1_07_PIN
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
|
|
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|
#if ENABLED(MKS_MINI_12864)
|
|
//#define LCD_BACKLIGHT_PIN -1
|
|
//#define LCD_RESET_PIN -1
|
|
#define DOGLCD_A0 PD11
|
|
#define DOGLCD_CS EXP1_04_PIN
|
|
//#define DOGLCD_SCK EXP2_09_PIN
|
|
//#define DOGLCD_MOSI EXP2_05_PIN
|
|
|
|
#elif ENABLED(MKS_MINI_12864_V3)
|
|
#define DOGLCD_CS EXP1_08_PIN
|
|
#define DOGLCD_A0 EXP1_07_PIN
|
|
#define LCD_PINS_DC DOGLCD_A0
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
#define LCD_RESET_PIN EXP1_06_PIN
|
|
#define NEOPIXEL_PIN EXP1_05_PIN
|
|
#define DOGLCD_MOSI EXP2_05_PIN
|
|
#define DOGLCD_SCK EXP2_09_PIN
|
|
#if SD_CONNECTION_IS(ONBOARD)
|
|
#define FORCE_SOFT_SPI
|
|
#endif
|
|
//#define LCD_SCREEN_ROT_180
|
|
|
|
#else
|
|
|
|
#define LCD_PINS_D4 EXP1_06_PIN
|
|
#if ENABLED(ULTIPANEL)
|
|
#define LCD_PINS_D5 EXP1_05_PIN
|
|
#define LCD_PINS_D6 EXP1_04_PIN
|
|
#define LCD_PINS_D7 EXP1_03_PIN
|
|
#endif
|
|
|
|
#define BOARD_ST7920_DELAY_1 96
|
|
#define BOARD_ST7920_DELAY_2 48
|
|
#define BOARD_ST7920_DELAY_3 600
|
|
|
|
#endif // !MKS_MINI_12864
|
|
|
|
#endif // HAS_WIRED_LCD
|
|
|
|
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
#define BTN_EN1 EXP2_08_PIN
|
|
#define BTN_EN2 EXP2_06_PIN
|
|
#define BTN_ENC EXP1_09_PIN
|
|
#endif
|