Firmware2/Marlin/src/pins/mega/pins_CNCONTROLS_15.h
2020-07-22 22:20:14 -05:00

128 lines
3.5 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* CNControls V15 for HMS434 pin assignments
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "CN Controls V15"
//
// Servos
//
#define SERVO0_PIN 6
//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 39
#define Z_STOP_PIN 62
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 49
#endif
//
// Steppers
//
#define X_STEP_PIN 14
#define X_DIR_PIN 25
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 11
#define Y_DIR_PIN 12
#define Y_ENABLE_PIN 15
#define Z_STEP_PIN 24
#define Z_DIR_PIN 27
#define Z_ENABLE_PIN 28
#define E0_STEP_PIN 64
#define E0_DIR_PIN 65
#define E0_ENABLE_PIN 63
//
// Temperature Sensors
// Analog Inputs
//
#define TEMP_0_PIN 2 // Analog Input
#define TEMP_BED_PIN 4 // Analog Input
#ifndef TEMP_CHAMBER_PIN
#define TEMP_CHAMBER_PIN 5 // Analog Input
#endif
//
// Heaters
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 32
#define HEATER_CHAMBER_PIN 33
//
// Fans
//
#define FAN_PIN 8
//
// Auto fans
//
#define AUTO_FAN_PIN 30
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E1_AUTO_FAN_PIN
#define E1_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E2_AUTO_FAN_PIN
#define E2_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E3_AUTO_FAN_PIN
#define E3_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef CHAMBER_AUTO_FAN_PIN
//#define CHAMBER_AUTO_FAN_PIN 10
#endif
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 40
// Common I/O
#define FIL_RUNOUT_PIN 9
//#define FIL_RUNOUT_PIN 29 // encoder sensor
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define BEEPER_PIN 13
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // 31