271 lines
6.0 KiB
C
271 lines
6.0 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* RADDS
|
|
*/
|
|
|
|
#ifndef __SAM3X8E__
|
|
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#define BOARD_NAME "RADDS"
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN 5
|
|
#define SERVO1_PIN 6
|
|
#define SERVO2_PIN 39
|
|
#define SERVO3_PIN 40
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 28
|
|
#define X_MAX_PIN 34
|
|
#define Y_MIN_PIN 30
|
|
#define Y_MAX_PIN 36
|
|
#define Z_MIN_PIN 32
|
|
#define Z_MAX_PIN 38
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN 38
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 24
|
|
#define X_DIR_PIN 23
|
|
#define X_ENABLE_PIN 26
|
|
#ifndef X_CS_PIN
|
|
#define X_CS_PIN 25
|
|
#endif
|
|
|
|
#define Y_STEP_PIN 17
|
|
#define Y_DIR_PIN 16
|
|
#define Y_ENABLE_PIN 22
|
|
#ifndef Y_CS_PIN
|
|
#define Y_CS_PIN 27
|
|
#endif
|
|
|
|
#define Z_STEP_PIN 2
|
|
#define Z_DIR_PIN 3
|
|
#define Z_ENABLE_PIN 15
|
|
#ifndef Z_CS_PIN
|
|
#define Z_CS_PIN 29
|
|
#endif
|
|
|
|
#define E0_STEP_PIN 61
|
|
#define E0_DIR_PIN 60
|
|
#define E0_ENABLE_PIN 62
|
|
#ifndef E0_CS_PIN
|
|
#define E0_CS_PIN 31
|
|
#endif
|
|
|
|
#define E1_STEP_PIN 64
|
|
#define E1_DIR_PIN 63
|
|
#define E1_ENABLE_PIN 65
|
|
#ifndef E1_CS_PIN
|
|
#define E1_CS_PIN 33
|
|
#endif
|
|
|
|
#define E2_STEP_PIN 51
|
|
#define E2_DIR_PIN 53
|
|
#define E2_ENABLE_PIN 49
|
|
#ifndef E2_CS_PIN
|
|
#define E2_CS_PIN 35
|
|
#endif
|
|
|
|
/**
|
|
* RADDS Extension Board V2 / V3
|
|
* http://doku.radds.org/dokumentation/extension-board
|
|
*/
|
|
//#define RADDS_EXTENSION 2
|
|
#if RADDS_EXTENSION >= 2
|
|
#define E3_DIR_PIN 33
|
|
#define E3_STEP_PIN 35
|
|
#define E3_ENABLE_PIN 37
|
|
#ifndef E3_CS_PIN
|
|
#define E3_CS_PIN 6
|
|
#endif
|
|
|
|
#if RADDS_EXTENSION == 3
|
|
|
|
#define E4_DIR_PIN 27
|
|
#define E4_STEP_PIN 29
|
|
#define E4_ENABLE_PIN 31
|
|
#ifndef E4_CS_PIN
|
|
#define E4_CS_PIN 39
|
|
#endif
|
|
|
|
#define E5_DIR_PIN 66
|
|
#define E5_STEP_PIN 67
|
|
#define E5_ENABLE_PIN 68
|
|
#ifndef E5_CS_PIN
|
|
#define E5_CS_PIN 6
|
|
#endif
|
|
|
|
#define RADDS_EXT_MSI_PIN 69
|
|
|
|
#define BOARD_INIT() OUT_WRITE(RADDS_EXT_VDD_PIN, HIGH)
|
|
|
|
#else
|
|
|
|
#define E4_DIR_PIN 27
|
|
#define E4_STEP_PIN 29
|
|
#define E4_ENABLE_PIN 31
|
|
#ifndef E4_CS_PIN
|
|
#define E4_CS_PIN 39
|
|
#endif
|
|
|
|
// E3 and E4 share the same MSx pins
|
|
#define E3_MS1_PIN 67
|
|
#define E4_MS1_PIN 67
|
|
#define E3_MS2_PIN 68
|
|
#define E4_MS2_PIN 68
|
|
#define E3_MS3_PIN 69
|
|
#define E4_MS3_PIN 69
|
|
|
|
#define RADDS_EXT_VDD2_PIN 66
|
|
|
|
#define BOARD_INIT() do{ OUT_WRITE(RADDS_EXT_VDD_PIN, HIGH); OUT_WRITE(RADDS_EXT_VDD2_PIN, HIGH); }while(0)
|
|
|
|
#endif
|
|
|
|
#define RADDS_EXT_VDD_PIN 25
|
|
|
|
#endif
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 0 // Analog Input
|
|
#define TEMP_1_PIN 1 // Analog Input
|
|
#define TEMP_2_PIN 2 // Analog Input
|
|
#define TEMP_3_PIN 3 // Analog Input
|
|
#define TEMP_4_PIN 5 // dummy so will compile when PINS_DEBUGGING is enabled
|
|
#define TEMP_BED_PIN 4 // Analog Input
|
|
|
|
// SPI for Max6675 or Max31855 Thermocouple
|
|
#if DISABLED(SDSUPPORT)
|
|
#define MAX6675_SS 53
|
|
#else
|
|
#define MAX6675_SS 49
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 13
|
|
#define HEATER_1_PIN 12
|
|
#define HEATER_2_PIN 11
|
|
#define HEATER_BED_PIN 7 // BED
|
|
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN 9
|
|
#endif
|
|
#define FAN1_PIN 8
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define SDSS 4
|
|
#define SD_DETECT_PIN 14
|
|
#define PS_ON_PIN 40 // SERVO3_PIN
|
|
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN 39 // SERVO2_PIN
|
|
#endif
|
|
|
|
// I2C EEPROM with 8K of space
|
|
#define I2C_EEPROM
|
|
#define E2END 0x1FFF
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
#if ENABLED(ULTRA_LCD)
|
|
|
|
#if ENABLED(RADDS_DISPLAY)
|
|
|
|
#define LCD_PINS_RS 42
|
|
#define LCD_PINS_ENABLE 43
|
|
#define LCD_PINS_D4 44
|
|
#define LCD_PINS_D5 45
|
|
#define LCD_PINS_D6 46
|
|
#define LCD_PINS_D7 47
|
|
|
|
#define BEEPER_PIN 41
|
|
|
|
#define BTN_EN1 50
|
|
#define BTN_EN2 52
|
|
#define BTN_ENC 48
|
|
|
|
#define BTN_BACK 71
|
|
|
|
#undef SDSS
|
|
#define SDSS 10
|
|
#define SD_DETECT_PIN 14
|
|
|
|
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
|
|
|
// The REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER requires
|
|
// an adapter such as https://www.thingiverse.com/thing:1740725
|
|
|
|
#define LCD_PINS_RS 42
|
|
#define LCD_PINS_ENABLE 43
|
|
#define LCD_PINS_D4 44
|
|
|
|
#define BEEPER_PIN 41
|
|
|
|
#define BTN_EN1 50
|
|
#define BTN_EN2 52
|
|
#define BTN_ENC 48
|
|
|
|
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
|
|
|
|
#define BTN_EN1 50
|
|
#define BTN_EN2 52
|
|
#define BTN_ENC 48
|
|
#define BEEPER_PIN 41
|
|
#define LCD_SDSS 10
|
|
#define SD_DETECT_PIN 14
|
|
|
|
#elif ENABLED(SPARK_FULL_GRAPHICS)
|
|
|
|
#define LCD_PINS_D4 29
|
|
#define LCD_PINS_ENABLE 27
|
|
#define LCD_PINS_RS 25
|
|
|
|
#define BTN_EN1 35
|
|
#define BTN_EN2 33
|
|
#define BTN_ENC 37
|
|
|
|
#endif // SPARK_FULL_GRAPHICS
|
|
|
|
#endif // ULTRA_LCD
|