542 lines
42 KiB
C++
542 lines
42 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* French
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
namespace Language_fr {
|
|
using namespace Language_en; // Inherit undefined strings from English
|
|
|
|
constexpr uint8_t CHARSIZE = 2;
|
|
PROGMEM Language_Str LANGUAGE = _UxGT("Français");
|
|
|
|
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" prête.");
|
|
PROGMEM Language_Str MSG_YES = _UxGT("Oui");
|
|
PROGMEM Language_Str MSG_NO = _UxGT("Non");
|
|
PROGMEM Language_Str MSG_BACK = _UxGT("Retour");
|
|
PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("Annulation...");
|
|
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Média inséré");
|
|
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Média retiré");
|
|
PROGMEM Language_Str MSG_MEDIA_RELEASED = _UxGT("Média libéré");
|
|
PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("Attente média");
|
|
PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("Err lecture média");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB débranché");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("Erreur média USB");
|
|
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("Butées");
|
|
PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("Butées SW");
|
|
PROGMEM Language_Str MSG_MAIN = _UxGT("Menu principal");
|
|
PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("Config. avancée");
|
|
PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("Configuration");
|
|
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("Exéc. auto#.gcode");
|
|
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Arrêter moteurs");
|
|
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Menu debug");
|
|
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Test barre progress.");
|
|
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Origine auto");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Origine X auto");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Origine Y auto");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Origine Z auto");
|
|
PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("Align. Z auto");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("Origine XYZ...");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Clic pour commencer");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Point suivant");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Mise à niveau OK!");
|
|
PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("Hauteur lissée");
|
|
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Régl. décal origine");
|
|
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Décalages appliqués");
|
|
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Régler origine");
|
|
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("Préchauffage ") PREHEAT_1_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("Préchauffage ") PREHEAT_1_LABEL " ~";
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("Préch. ") PREHEAT_1_LABEL _UxGT(" buse");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("Préch. ") PREHEAT_1_LABEL _UxGT(" buse ~");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("Préch. ") PREHEAT_1_LABEL _UxGT(" Tout");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("Préch. ") PREHEAT_1_LABEL _UxGT(" lit");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("Régler préch. ") PREHEAT_1_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("Préchauffage ") PREHEAT_2_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H = _UxGT("Préchauffage ") PREHEAT_2_LABEL " ~";
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("Préch. ") PREHEAT_2_LABEL _UxGT(" buse");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E = _UxGT("Préch. ") PREHEAT_2_LABEL _UxGT(" buse ~");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("Préch. ") PREHEAT_2_LABEL _UxGT(" Tout");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("Préch. ") PREHEAT_2_LABEL _UxGT(" lit");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("Régler préch. ") PREHEAT_2_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("Préchauf. perso");
|
|
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Refroidir");
|
|
PROGMEM Language_Str MSG_LASER_MENU = _UxGT("Contrôle Laser");
|
|
PROGMEM Language_Str MSG_LASER_POWER = _UxGT("Puissance");
|
|
PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("Inverser broches");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Allumer alim.");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Eteindre alim.");
|
|
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extrusion");
|
|
PROGMEM Language_Str MSG_RETRACT = _UxGT("Rétraction");
|
|
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Déplacer un axe");
|
|
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Régler Niv. lit");
|
|
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Niveau du lit");
|
|
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("Niveau des coins");
|
|
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Coin suivant");
|
|
PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Modif. maille"); // 13 car. max
|
|
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Modifier grille");
|
|
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("Modification arrêtée");
|
|
PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("Mesure point");
|
|
PROGMEM Language_Str MSG_MESH_X = _UxGT("Index X");
|
|
PROGMEM Language_Str MSG_MESH_Y = _UxGT("Index Y");
|
|
PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Valeur Z");
|
|
PROGMEM Language_Str MSG_USER_MENU = _UxGT("Commandes perso");
|
|
|
|
PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("Mesure point");
|
|
PROGMEM Language_Str MSG_M48_TEST = _UxGT("Ecart sonde Z M48");
|
|
PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("Ecart");
|
|
PROGMEM Language_Str MSG_M48_POINT = _UxGT("Point M48");
|
|
PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("Mode IDEX");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT("Auto-Park");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplication");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Copie miroir");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT("Contrôle complet");
|
|
PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("Offsets Outil");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_X = _UxGT("Buse 2 X");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_Y = _UxGT("Buse 2 Y");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_Z = _UxGT("Buse 2 Z");
|
|
PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26: Chauffage du lit");
|
|
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("Buse en chauffe...");
|
|
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Amorce manuelle...");
|
|
PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("Amorce longueur fixe");
|
|
PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("Amorce terminée");
|
|
PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26 annulé");
|
|
PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("Sortie G26");
|
|
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("G29 en cours");
|
|
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("Outils UBL");
|
|
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("Niveau lit unifié");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("Maillage manuel");
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("Poser câle & mesurer");
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("Mesure");
|
|
PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT("ôter et mesurer lit");
|
|
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("Aller au suivant");
|
|
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("Activer l'UBL");
|
|
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("Désactiver l'UBL");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("Température lit");
|
|
PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("Température lit");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("Température buse");
|
|
PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("Température buse");
|
|
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("Modifier grille");
|
|
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("Modif. grille perso");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("Réglage fin");
|
|
PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT("Terminer");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT("Créer la grille");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M1 = _UxGT("Créer grille ") PREHEAT_1_LABEL;
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M2 = _UxGT("Créer grille ") PREHEAT_2_LABEL;
|
|
PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("Créer grille ...");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT("Mesure à froid");
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Ajuster haut. couche");
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Hauteur (x0.1mm)");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Vérifier grille");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1 = _UxGT("Impr. grille ") PREHEAT_1_LABEL;
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2 = _UxGT("Impr. grille ") PREHEAT_2_LABEL;
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Impr. grille ...");
|
|
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("Continuer grille");
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("Niveau par mailles");
|
|
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("Niveau à 3 points");
|
|
PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT("Niveau par grille");
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT("Effectuer mesures");
|
|
PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT("Points latéraux");
|
|
PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT("Type de carte");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("Exporter grille");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("Export pour hôte");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("Export en CSV");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("Export sauvegarde");
|
|
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("Infos debug UBL");
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("Nombre de points");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("Remplissage manuel");
|
|
PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT("Remplissage auto");
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT("Remplissage grille");
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT("Tout effacer");
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Effacer le + près");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT("Réglage fin (tous)");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("Réglage fin + près");
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("Stockage grille");
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Slot mémoire");
|
|
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Charger la grille");
|
|
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Stocker la grille");
|
|
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("Grille %i chargée");
|
|
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("Grille %i enreg.");
|
|
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("Pas de mémoire");
|
|
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Err: Enreg. UBL");
|
|
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("Err: Ouvrir UBL");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Z-Offset: ");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Décal. Z arrêté");
|
|
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("Assistant UBL");
|
|
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Mesure à froid");
|
|
PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2.Compléter auto.");
|
|
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3.Vérifier grille");
|
|
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Réglage fin");
|
|
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5.Vérifier grille");
|
|
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Réglage fin");
|
|
PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7.Stocker grille");
|
|
|
|
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("Contrôle LED");
|
|
PROGMEM Language_Str MSG_LEDS = _UxGT("Lumière");
|
|
PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("Préregl. LED");
|
|
PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("Rouge");
|
|
PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("Orange");
|
|
PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("Jaune");
|
|
PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT("Vert");
|
|
PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT("Bleu");
|
|
PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT("Indigo");
|
|
PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("Violet");
|
|
PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("Blanc");
|
|
PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("Defaut");
|
|
PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("LEDs perso.");
|
|
PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("Intensité rouge");
|
|
PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("Intensité vert");
|
|
PROGMEM Language_Str MSG_INTENSITY_B = _UxGT("Intensité bleu");
|
|
PROGMEM Language_Str MSG_INTENSITY_W = _UxGT("Intensité blanc");
|
|
PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT("Luminosité");
|
|
|
|
PROGMEM Language_Str MSG_MOVING = _UxGT("Déplacement...");
|
|
PROGMEM Language_Str MSG_FREE_XY = _UxGT("Débloquer XY");
|
|
PROGMEM Language_Str MSG_MOVE_X = _UxGT("Déplacer X");
|
|
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Déplacer Y");
|
|
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Déplacer Z");
|
|
PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extrudeur");
|
|
PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Extrudeur *");
|
|
PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("Buse trop froide");
|
|
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Déplacer %smm");
|
|
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Déplacer 0.1mm");
|
|
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Déplacer 1mm");
|
|
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Déplacer 10mm");
|
|
PROGMEM Language_Str MSG_SPEED = _UxGT("Vitesse");
|
|
PROGMEM Language_Str MSG_BED_Z = _UxGT("Lit Z");
|
|
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Buse");
|
|
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Buse ~");
|
|
PROGMEM Language_Str MSG_BED = _UxGT("Lit");
|
|
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Caisson");
|
|
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vit. ventil. "); // 15 car. max
|
|
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vit. ventil. ~");
|
|
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Vit. enreg. ~");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra ventil. ");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra ventil. ~");
|
|
|
|
PROGMEM Language_Str MSG_FLOW = _UxGT("Flux");
|
|
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flux ~");
|
|
PROGMEM Language_Str MSG_CONTROL = _UxGT("Contrôler");
|
|
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
|
|
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
|
|
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Facteur");
|
|
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Temp. Auto.");
|
|
PROGMEM Language_Str MSG_LCD_ON = _UxGT("Marche");
|
|
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Arrêt");
|
|
PROGMEM Language_Str MSG_SELECT = _UxGT("Sélectionner");
|
|
PROGMEM Language_Str MSG_SELECT_E = _UxGT("Sélectionner *");
|
|
PROGMEM Language_Str MSG_ACC = _UxGT("Accélération");
|
|
PROGMEM Language_Str MSG_JERK = _UxGT("Jerk");
|
|
PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT(" jerk");
|
|
PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT(" jerk");
|
|
PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT(" jerk");
|
|
PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve jerk");
|
|
PROGMEM Language_Str MSG_VELOCITY = _UxGT("Vélocité");
|
|
PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Déviat. jonct.");
|
|
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vmin course");
|
|
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Accélération");
|
|
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Acc.rétraction");
|
|
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("Acc.course");
|
|
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Pas/mm");
|
|
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" pas/mm");
|
|
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" pas/mm");
|
|
PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" pas/mm");
|
|
PROGMEM Language_Str MSG_E_STEPS = _UxGT("E pas/mm");
|
|
PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* pas/mm");
|
|
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Température");
|
|
PROGMEM Language_Str MSG_MOTION = _UxGT("Mouvement");
|
|
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament");
|
|
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E en mm³");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Diamètre fil.");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Diamètre fil. *");
|
|
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Retrait mm");
|
|
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Charger mm");
|
|
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Avance K");
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Avance K *");
|
|
PROGMEM Language_Str MSG_CONTRAST = _UxGT("Contraste LCD");
|
|
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Enregistrer config.");
|
|
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Charger config.");
|
|
PROGMEM Language_Str MSG_RESTORE_FAILSAFE = _UxGT("Restaurer défauts");
|
|
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("Initialiser EEPROM");
|
|
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("MaJ Firmware SD");
|
|
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("RaZ imprimante");
|
|
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Actualiser");
|
|
PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("Surveiller");
|
|
PROGMEM Language_Str MSG_PREPARE = _UxGT("Préparer");
|
|
PROGMEM Language_Str MSG_TUNE = _UxGT("Régler");
|
|
PROGMEM Language_Str MSG_START_PRINT = _UxGT("Démarrer impression");
|
|
PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("Suivant");
|
|
PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("Init.");
|
|
PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("Stop");
|
|
PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("Imprimer");
|
|
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("Reset");
|
|
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("Annuler");
|
|
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("Terminé");
|
|
PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("Retour");
|
|
PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("Procéder");
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pause impression");
|
|
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Reprendre impr.");
|
|
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Arrêter impr.");
|
|
PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("Impression objet");
|
|
PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("Annuler objet");
|
|
PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("Annuler objet =");
|
|
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Récup. coup.");
|
|
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Impression SD");
|
|
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Pas de média");
|
|
PROGMEM Language_Str MSG_DWELL = _UxGT("Repos...");
|
|
PROGMEM Language_Str MSG_USERWAIT = _UxGT("Attente utilis.");
|
|
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("Impr. en pause");
|
|
PROGMEM Language_Str MSG_PRINTING = _UxGT("Impression");
|
|
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Impr. annulée");
|
|
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Moteurs bloqués");
|
|
PROGMEM Language_Str MSG_KILLED = _UxGT("KILLED");
|
|
PROGMEM Language_Str MSG_STOPPED = _UxGT("STOPPÉ");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Rétraction mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Ech. rétr. mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Vit. rétract°");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Saut Z mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("Rét.reprise mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Ech.reprise mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("V.rét. reprise");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("V.éch. reprise");
|
|
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("Rétraction auto");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("Changement outil");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Augmenter Z");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD = _UxGT("Vitesse primaire");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD = _UxGT("Vitesse rétract°");
|
|
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Attente buse");
|
|
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("Longueur retrait");
|
|
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("Longueur de purge");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Changer filament");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Changer filament *");
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Charger filament");
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("Charger filament *");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("Retrait filament");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("Retrait filament *");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("Retirer tout");
|
|
PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("Charger le média");
|
|
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Actualiser média");
|
|
PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("Retirer le média");
|
|
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonde Z hors lit");
|
|
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Facteur écart");
|
|
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: Self-Test");
|
|
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: Reset");
|
|
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Ranger");
|
|
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Déployer");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: Mode SW");
|
|
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: Mode 5V");
|
|
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: Mode OD");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Appliquer Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Mise en 5V");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Mise en OD");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Afficher Mode");
|
|
PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("Init. TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Test décalage Z");
|
|
PROGMEM Language_Str MSG_TOUCHMI_SAVE = _UxGT("Sauvegarde");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("Déployer TouchMI");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("Déployer Sonde Z");
|
|
PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("Ranger Sonde Z");
|
|
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Origine %s%s%s Premier");
|
|
PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT("Position sonde Z");
|
|
PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("Décalage X");
|
|
PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("Décalage Y");
|
|
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Décalage Z");
|
|
PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("Total");
|
|
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Butée abandon");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Err de chauffe");
|
|
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Err TEMP. REDONDANTE");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Err THERMIQUE");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err TEMP. MAX");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err TEMP. MIN");
|
|
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("Origine XY Premier");
|
|
|
|
PROGMEM Language_Str MSG_HALTED = _UxGT("IMPR. STOPPÉE");
|
|
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Redémarrer SVP");
|
|
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("j"); // One character only
|
|
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // One character only
|
|
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // One character only
|
|
|
|
PROGMEM Language_Str MSG_HEATING = _UxGT("En chauffe...");
|
|
PROGMEM Language_Str MSG_COOLING = _UxGT("Refroidissement");
|
|
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Lit en chauffe...");
|
|
PROGMEM Language_Str MSG_BED_COOLING = _UxGT("Refroid. du lit...");
|
|
PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("Chauffe caisson...");
|
|
PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("Refroid. caisson...");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Calibration Delta");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Calibrer X");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Calibrer Y");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Calibrer Z");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Calibrer centre");
|
|
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("Réglages Delta");
|
|
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("Calibration Auto");
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Hauteur Delta");
|
|
PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE = _UxGT("Delta Z sonde");
|
|
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("Diagonale");
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("Hauteur");
|
|
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("Rayon");
|
|
|
|
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("Infos imprimante");
|
|
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("Infos imprimante");
|
|
PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("Niveau à 3 points");
|
|
PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("Niveau linéaire");
|
|
PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("Niveau bilinéaire");
|
|
PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("Niveau lit unifié");
|
|
PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("Niveau par grille");
|
|
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("Stats. imprimante");
|
|
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Infos carte");
|
|
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistances");
|
|
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("Extrudeurs");
|
|
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("Bauds");
|
|
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("Protocole");
|
|
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Lumière caisson");
|
|
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Luminosité");
|
|
|
|
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("Imprimante incorrecte");
|
|
|
|
#if LCD_WIDTH >= 20
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Nbre impressions");
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Terminées");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Tps impr. total");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Impr. la + longue");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Total filament");
|
|
#else
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Impressions");
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Terminées");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("+ long");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Filament");
|
|
#endif
|
|
|
|
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Temp Min");
|
|
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp Max");
|
|
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Alimentation");
|
|
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Puiss. moteur ");
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %");
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %");
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %");
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %");
|
|
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM sauv.");
|
|
PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ERREUR CONNEXION TMC");
|
|
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("CHANGER FILAMENT");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("IMPR. PAUSE");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("CHARGER FIL");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("DECHARGER FIL");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("OPTIONS REPRISE:");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Purger encore");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Reprendre impr.");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Buse: ");
|
|
PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("Capteur fil.");
|
|
PROGMEM Language_Str MSG_LCD_HOMING_FAILED = _UxGT("Echec origine");
|
|
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("Echec sonde");
|
|
PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: Trop froid");
|
|
|
|
PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("CHOISIR FILAMENT");
|
|
PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU");
|
|
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU ne répond plus");
|
|
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Continuer impr.");
|
|
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Reprise...");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Charger filament");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Charger tous");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Charger dans buse");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Ejecter filament");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Ejecter fil. ~");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Retrait filament");
|
|
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Chargem. fil. %i...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("Ejection fil...");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Retrait fil....");
|
|
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("Tous");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("Filament ~");
|
|
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("Réinit. MMU");
|
|
PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT("Réinit. MMU...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("Retrait, click");
|
|
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("Composante ~");
|
|
PROGMEM Language_Str MSG_MIXER = _UxGT("Mixeur");
|
|
PROGMEM Language_Str MSG_GRADIENT = _UxGT("Dégradé");
|
|
PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("Dégradé complet");
|
|
PROGMEM Language_Str MSG_TOGGLE_MIX = _UxGT("Toggle mix");
|
|
PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("Cycle mix");
|
|
PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("Mix dégradé");
|
|
PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("Inverser dégradé");
|
|
PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("Active V-tool");
|
|
PROGMEM Language_Str MSG_START_VTOOL = _UxGT("Début V-tool");
|
|
PROGMEM Language_Str MSG_END_VTOOL = _UxGT(" Fin V-tool");
|
|
PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("Alias V-tool");
|
|
PROGMEM Language_Str MSG_RESET_VTOOLS = _UxGT("Réinit. V-tools");
|
|
PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("Valider Mix V-tool");
|
|
PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("V-tools réinit. ok");
|
|
PROGMEM Language_Str MSG_START_Z = _UxGT("Début Z:");
|
|
PROGMEM Language_Str MSG_END_Z = _UxGT(" Fin Z:");
|
|
PROGMEM Language_Str MSG_GAMES = _UxGT("Jeux");
|
|
PROGMEM Language_Str MSG_BRICKOUT = _UxGT("Casse-briques");
|
|
PROGMEM Language_Str MSG_INVADERS = _UxGT("Invaders");
|
|
PROGMEM Language_Str MSG_SNAKE = _UxGT("Sn4k3");
|
|
PROGMEM Language_Str MSG_MAZE = _UxGT("Labyrinthe");
|
|
|
|
#if LCD_HEIGHT >= 4
|
|
// Up to 3 lines allowed
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Presser bouton", "pour reprendre"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_INIT = _UxGT(MSG_1_LINE("Parking..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Attente filament", "pour démarrer"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Insérer filament", "et app. bouton", "pour continuer..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Presser le bouton", "pour chauffer..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Buse en chauffe", "Patienter SVP..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Attente", "retrait du filament"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Attente", "chargement filament"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("Attente", "Purge filament"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("Presser pour finir", "la purge du filament"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Attente reprise", "impression"));
|
|
#else // LCD_HEIGHT < 4
|
|
// Up to 2 lines allowed
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("Clic pour continuer"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Patience..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Insérer fil."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Chauffer ?"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Chauffage..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Retrait fil..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Chargement..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Purge..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Terminer ?"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Reprise..."));
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("Courant driver");
|
|
PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT("Seuil hybride");
|
|
PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT("Home sans capteur");
|
|
PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT("Mode pas à pas");
|
|
PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop activé");
|
|
PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("Réinit.");
|
|
PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" dans:");
|
|
PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Correction");
|
|
PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Lissage");
|
|
}
|