665 lines
37 KiB
C
665 lines
37 KiB
C
/**
|
|
* \file
|
|
*
|
|
* \brief USB Device Driver for UOTGHS. Compliant with common UDD driver.
|
|
*
|
|
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
|
|
*
|
|
* \asf_license_start
|
|
*
|
|
* \page License
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* 3. The name of Atmel may not be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* 4. This software may only be redistributed and used in connection with an
|
|
* Atmel microcontroller product.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* \asf_license_stop
|
|
*
|
|
*/
|
|
/*
|
|
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
|
*/
|
|
|
|
#ifndef UOTGHS_DEVICE_DUE_H_INCLUDED
|
|
#define UOTGHS_DEVICE_DUE_H_INCLUDED
|
|
|
|
//#include "compiler.h"
|
|
|
|
/// @cond 0
|
|
/**INDENT-OFF**/
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
/**INDENT-ON**/
|
|
/// @endcond
|
|
|
|
//! \ingroup udd_group
|
|
//! \defgroup udd_udphs_group USB On-The-Go High-Speed Port for device mode (UOTGHS)
|
|
//! UOTGHS low-level driver for USB device mode
|
|
//!
|
|
//! @{
|
|
|
|
#ifndef UOTGHS_DEVEPTCFG_EPDIR_Pos
|
|
// Bit pos is not defined in SAM header file but we need it.
|
|
# define UOTGHS_DEVEPTCFG_EPDIR_Pos 8
|
|
#endif
|
|
|
|
//! @name UOTGHS Device IP properties
|
|
//! These macros give access to IP properties
|
|
//! @{
|
|
//! Get maximal number of endpoints
|
|
#define udd_get_endpoint_max_nbr() (9)
|
|
#define UDD_MAX_PEP_NB (udd_get_endpoint_max_nbr() + 1)
|
|
//! Get maximal number of banks of endpoints
|
|
#define udd_get_endpoint_bank_max_nbr(ep) ((ep == 0) ? 1 : (( ep <= 2) ? 3 : 2))
|
|
//! Get maximal size of endpoint (3X, 1024/64)
|
|
#define udd_get_endpoint_size_max(ep) (((ep) == 0) ? 64 : 1024)
|
|
//! Get DMA support of endpoints
|
|
#define Is_udd_endpoint_dma_supported(ep) ((((ep) >= 1) && ((ep) <= 6)) ? true : false)
|
|
//! Get High Band Width support of endpoints
|
|
#define Is_udd_endpoint_high_bw_supported(ep) (((ep) >= 2) ? true : false)
|
|
//! @}
|
|
|
|
//! @name UOTGHS Device speeds management
|
|
//! @{
|
|
//! Enable/disable device low-speed mode
|
|
#define udd_low_speed_enable() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_LS))
|
|
#define udd_low_speed_disable() (Clr_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_LS))
|
|
//! Test if device low-speed mode is forced
|
|
#define Is_udd_low_speed_enable() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_LS))
|
|
|
|
#ifdef UOTGHS_DEVCTRL_SPDCONF_HIGH_SPEED
|
|
//! Enable high speed mode
|
|
# define udd_high_speed_enable() (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_SPDCONF_Msk, 0))
|
|
//! Disable high speed mode
|
|
# define udd_high_speed_disable() (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_SPDCONF_Msk, 3))
|
|
//! Test if controller is in full speed mode
|
|
# define Is_udd_full_speed_mode() (Rd_bitfield(UOTGHS->UOTGHS_SR, UOTGHS_SR_SPEED_Msk) == UOTGHS_SR_SPEED_FULL_SPEED)
|
|
#else
|
|
# define udd_high_speed_enable() do { } while (0)
|
|
# define udd_high_speed_disable() do { } while (0)
|
|
# define Is_udd_full_speed_mode() true
|
|
#endif
|
|
//! @}
|
|
|
|
//! @name UOTGHS Device HS test mode management
|
|
//! @{
|
|
#ifdef UOTGHS_DEVCTRL_SPDCONF_HIGH_SPEED
|
|
//! Enable high speed test mode
|
|
# define udd_enable_hs_test_mode() (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_SPDCONF_Msk, 2))
|
|
# define udd_enable_hs_test_mode_j() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_TSTJ))
|
|
# define udd_enable_hs_test_mode_k() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_TSTK))
|
|
# define udd_enable_hs_test_mode_packet() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_TSTPCKT))
|
|
#endif
|
|
//! @}
|
|
|
|
//! @name UOTGHS Device vbus management
|
|
//! @{
|
|
#define udd_enable_vbus_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
|
|
#define udd_disable_vbus_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
|
|
#define Is_udd_vbus_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
|
|
#define Is_udd_vbus_high() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUS))
|
|
#define Is_udd_vbus_low() (!Is_udd_vbus_high())
|
|
#define udd_ack_vbus_transition() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_VBUSTIC)
|
|
#define udd_raise_vbus_transition() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_VBUSTIS)
|
|
#define Is_udd_vbus_transition() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
|
|
//! @}
|
|
|
|
|
|
//! @name UOTGHS device attach control
|
|
//! These macros manage the UOTGHS Device attach.
|
|
//! @{
|
|
//! Detaches from USB bus
|
|
#define udd_detach_device() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
|
|
//! Attaches to USB bus
|
|
#define udd_attach_device() (Clr_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
|
|
//! Test if the device is detached
|
|
#define Is_udd_detached() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
|
|
//! @}
|
|
|
|
|
|
//! @name UOTGHS device bus events control
|
|
//! These macros manage the UOTGHS Device bus events.
|
|
//! @{
|
|
|
|
//! Initiates a remote wake-up event
|
|
//! @{
|
|
#define udd_initiate_remote_wake_up() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_RMWKUP))
|
|
#define Is_udd_pending_remote_wake_up() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_RMWKUP))
|
|
//! @}
|
|
|
|
//! Manage upstream resume event (=remote wakeup)
|
|
//! The USB driver sends a resume signal called "Upstream Resume"
|
|
//! @{
|
|
#define udd_enable_remote_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_UPRSMES)
|
|
#define udd_disable_remote_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_UPRSMEC)
|
|
#define Is_udd_remote_wake_up_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_UPRSME))
|
|
#define udd_ack_remote_wake_up_start() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_UPRSMC)
|
|
#define udd_raise_remote_wake_up_start() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_UPRSMS)
|
|
#define Is_udd_remote_wake_up_start() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_UPRSM))
|
|
//! @}
|
|
|
|
//! Manage downstream resume event (=remote wakeup from host)
|
|
//! The USB controller detects a valid "End of Resume" signal initiated by the host
|
|
//! @{
|
|
#define udd_enable_resume_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_EORSMES)
|
|
#define udd_disable_resume_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_EORSMEC)
|
|
#define Is_udd_resume_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_EORSME))
|
|
#define udd_ack_resume() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_EORSMC)
|
|
#define udd_raise_resume() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_EORSMS)
|
|
#define Is_udd_resume() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_EORSM))
|
|
//! @}
|
|
|
|
//! Manage wake-up event (=usb line activity)
|
|
//! The USB controller is reactivated by a filtered non-idle signal from the lines
|
|
//! @{
|
|
#define udd_enable_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_WAKEUPES)
|
|
#define udd_disable_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_WAKEUPEC)
|
|
#define Is_udd_wake_up_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_WAKEUPE))
|
|
#define udd_ack_wake_up() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_WAKEUPC)
|
|
#define udd_raise_wake_up() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_WAKEUPS)
|
|
#define Is_udd_wake_up() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_WAKEUP))
|
|
//! @}
|
|
|
|
//! Manage reset event
|
|
//! Set when a USB "End of Reset" has been detected
|
|
//! @{
|
|
#define udd_enable_reset_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_EORSTES)
|
|
#define udd_disable_reset_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_EORSTEC)
|
|
#define Is_udd_reset_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_EORSTE))
|
|
#define udd_ack_reset() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_EORSTC)
|
|
#define udd_raise_reset() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_EORSTS)
|
|
#define Is_udd_reset() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_EORST))
|
|
//! @}
|
|
|
|
//! Manage start of frame event
|
|
//! @{
|
|
#define udd_enable_sof_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_SOFES)
|
|
#define udd_disable_sof_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_SOFEC)
|
|
#define Is_udd_sof_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_SOFE))
|
|
#define udd_ack_sof() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_SOFC)
|
|
#define udd_raise_sof() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_SOFS)
|
|
#define Is_udd_sof() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_SOF))
|
|
#define udd_frame_number() (Rd_bitfield(UOTGHS->UOTGHS_DEVFNUM, UOTGHS_DEVFNUM_FNUM_Msk))
|
|
#define Is_udd_frame_number_crc_error() (Tst_bits(UOTGHS->UOTGHS_DEVFNUM, UOTGHS_DEVFNUM_FNCERR))
|
|
//! @}
|
|
|
|
//! Manage Micro start of frame event (High Speed Only)
|
|
//! @{
|
|
#define udd_enable_msof_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_MSOFES)
|
|
#define udd_disable_msof_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_MSOFEC)
|
|
#define Is_udd_msof_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_MSOFE))
|
|
#define udd_ack_msof() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVIMR_MSOFE)
|
|
#define udd_raise_msof() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_MSOFS)
|
|
#define Is_udd_msof() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_MSOF))
|
|
#define udd_micro_frame_number() \
|
|
(Rd_bitfield(UOTGHS->UOTGHS_DEVFNUM, (UOTGHS_DEVFNUM_FNUM_Msk|UOTGHS_DEVFNUM_MFNUM_Msk)))
|
|
//! @}
|
|
|
|
//! Manage suspend event
|
|
//! @{
|
|
#define udd_enable_suspend_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_SUSPES)
|
|
#define udd_disable_suspend_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_SUSPEC)
|
|
#define Is_udd_suspend_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_SUSPE))
|
|
#define udd_ack_suspend() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_SUSPC)
|
|
#define udd_raise_suspend() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_SUSPS)
|
|
#define Is_udd_suspend() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_SUSP))
|
|
//! @}
|
|
|
|
//! @}
|
|
|
|
//! @name UOTGHS device address control
|
|
//! These macros manage the UOTGHS Device address.
|
|
//! @{
|
|
//! enables USB device address
|
|
#define udd_enable_address() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_ADDEN))
|
|
//! disables USB device address
|
|
#define udd_disable_address() (Clr_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_ADDEN))
|
|
#define Is_udd_address_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_ADDEN))
|
|
//! configures the USB device address
|
|
#define udd_configure_address(addr) (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk, addr))
|
|
//! gets the currently configured USB device address
|
|
#define udd_get_configured_address() (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
|
|
//! @}
|
|
|
|
|
|
//! @name UOTGHS Device endpoint drivers
|
|
//! These macros manage the common features of the endpoints.
|
|
//! @{
|
|
|
|
//! Generic macro for UOTGHS registers that can be arrayed
|
|
//! @{
|
|
#define UOTGHS_ARRAY(reg,index) ((&(UOTGHS->reg))[(index)])
|
|
//! @}
|
|
|
|
//! @name UOTGHS Device endpoint configuration
|
|
//! @{
|
|
//! enables the selected endpoint
|
|
#define udd_enable_endpoint(ep) (Set_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPEN0 << (ep)))
|
|
//! disables the selected endpoint
|
|
#define udd_disable_endpoint(ep) (Clr_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPEN0 << (ep)))
|
|
//! tests if the selected endpoint is enabled
|
|
#define Is_udd_endpoint_enabled(ep) (Tst_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPEN0 << (ep)))
|
|
//! resets the selected endpoint
|
|
#define udd_reset_endpoint(ep) \
|
|
do { \
|
|
Set_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPRST0 << (ep)); \
|
|
Clr_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPRST0 << (ep)); \
|
|
} while (0)
|
|
//! Tests if the selected endpoint is being reset
|
|
#define Is_udd_resetting_endpoint(ep) (Tst_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPRST0 << (ep)))
|
|
|
|
//! Configures the selected endpoint type
|
|
#define udd_configure_endpoint_type(ep, type) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPTYPE_Msk, type))
|
|
//! Gets the configured selected endpoint type
|
|
#define udd_get_endpoint_type(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPTYPE_Msk))
|
|
//! Enables the bank autoswitch for the selected endpoint
|
|
#define udd_enable_endpoint_bank_autoswitch(ep) (Set_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_AUTOSW))
|
|
//! Disables the bank autoswitch for the selected endpoint
|
|
#define udd_disable_endpoint_bank_autoswitch(ep) (Clr_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_AUTOSW))
|
|
#define Is_udd_endpoint_bank_autoswitch_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_AUTOSW))
|
|
//! Configures the selected endpoint direction
|
|
#define udd_configure_endpoint_direction(ep, dir) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPDIR, dir))
|
|
//! Gets the configured selected endpoint direction
|
|
#define udd_get_endpoint_direction(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPDIR))
|
|
#define Is_udd_endpoint_in(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPDIR))
|
|
//! Bounds given integer size to allowed range and rounds it up to the nearest
|
|
//! available greater size, then applies register format of UOTGHS controller
|
|
//! for endpoint size bit-field.
|
|
#undef udd_format_endpoint_size
|
|
#define udd_format_endpoint_size(size) (32 - clz(((uint32_t)MIN(MAX(size, 8), 1024) << 1) - 1) - 1 - 3)
|
|
//! Configures the selected endpoint size
|
|
#define udd_configure_endpoint_size(ep, size) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPSIZE_Msk, udd_format_endpoint_size(size)))
|
|
//! Gets the configured selected endpoint size
|
|
#define udd_get_endpoint_size(ep) (8 << Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPSIZE_Msk))
|
|
//! Configures the selected endpoint number of banks
|
|
#define udd_configure_endpoint_bank(ep, bank) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPBK_Msk, bank))
|
|
//! Gets the configured selected endpoint number of banks
|
|
#define udd_get_endpoint_bank(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPBK_Msk)+1)
|
|
//! Allocates the configuration selected endpoint in DPRAM memory
|
|
#define udd_allocate_memory(ep) (Set_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_ALLOC))
|
|
//! un-allocates the configuration selected endpoint in DPRAM memory
|
|
#define udd_unallocate_memory(ep) (Clr_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_ALLOC))
|
|
#define Is_udd_memory_allocated(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_ALLOC))
|
|
|
|
//! Configures selected endpoint in one step
|
|
#define udd_configure_endpoint(ep, type, dir, size, bank) (\
|
|
Wr_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPTYPE_Msk |\
|
|
UOTGHS_DEVEPTCFG_EPDIR |\
|
|
UOTGHS_DEVEPTCFG_EPSIZE_Msk |\
|
|
UOTGHS_DEVEPTCFG_EPBK_Msk , \
|
|
(((uint32_t)(type) << UOTGHS_DEVEPTCFG_EPTYPE_Pos) & UOTGHS_DEVEPTCFG_EPTYPE_Msk) |\
|
|
(((uint32_t)(dir ) << UOTGHS_DEVEPTCFG_EPDIR_Pos ) & UOTGHS_DEVEPTCFG_EPDIR) |\
|
|
( (uint32_t)udd_format_endpoint_size(size) << UOTGHS_DEVEPTCFG_EPSIZE_Pos) |\
|
|
(((uint32_t)(bank) << UOTGHS_DEVEPTCFG_EPBK_Pos) & UOTGHS_DEVEPTCFG_EPBK_Msk))\
|
|
)
|
|
//! Tests if current endpoint is configured
|
|
#define Is_udd_endpoint_configured(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_CFGOK))
|
|
//! Returns the control direction
|
|
#define udd_control_direction() (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], EP_CONTROL), UOTGHS_DEVEPTISR_CTRLDIR))
|
|
|
|
//! Resets the data toggle sequence
|
|
#define udd_reset_data_toggle(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_RSTDTS)
|
|
//! Tests if the data toggle sequence is being reset
|
|
#define Is_udd_data_toggle_reset(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_RSTDT))
|
|
//! Returns data toggle
|
|
#define udd_data_toggle(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
|
|
//! @}
|
|
|
|
|
|
//! @name UOTGHS Device control endpoint
|
|
//! These macros control the endpoints.
|
|
//! @{
|
|
|
|
//! @name UOTGHS Device control endpoint interrupts
|
|
//! These macros control the endpoints interrupts.
|
|
//! @{
|
|
//! Enables the selected endpoint interrupt
|
|
#define udd_enable_endpoint_interrupt(ep) (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_PEP_0 << (ep))
|
|
//! Disables the selected endpoint interrupt
|
|
#define udd_disable_endpoint_interrupt(ep) (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_PEP_0 << (ep))
|
|
//! Tests if the selected endpoint interrupt is enabled
|
|
#define Is_udd_endpoint_interrupt_enabled(ep) (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_PEP_0 << (ep)))
|
|
//! Tests if an interrupt is triggered by the selected endpoint
|
|
#define Is_udd_endpoint_interrupt(ep) (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_PEP_0 << (ep)))
|
|
//! Returns the lowest endpoint number generating an endpoint interrupt or MAX_PEP_NB if none
|
|
#define udd_get_interrupt_endpoint_number() (ctz(((UOTGHS->UOTGHS_DEVISR >> UOTGHS_DEVISR_PEP_Pos) & \
|
|
(UOTGHS->UOTGHS_DEVIMR >> UOTGHS_DEVIMR_PEP_Pos)) | \
|
|
(1 << MAX_PEP_NB)))
|
|
#define UOTGHS_DEVISR_PEP_Pos 12
|
|
#define UOTGHS_DEVIMR_PEP_Pos 12
|
|
//! @}
|
|
|
|
//! @name UOTGHS Device control endpoint errors
|
|
//! These macros control the endpoint errors.
|
|
//! @{
|
|
//! Enables the STALL handshake
|
|
#define udd_enable_stall_handshake(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_STALLRQS)
|
|
//! Disables the STALL handshake
|
|
#define udd_disable_stall_handshake(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_STALLRQC)
|
|
//! Tests if STALL handshake request is running
|
|
#define Is_udd_endpoint_stall_requested(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_STALLRQ))
|
|
//! Tests if STALL sent
|
|
#define Is_udd_stall(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_STALLEDI))
|
|
//! ACKs STALL sent
|
|
#define udd_ack_stall(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_STALLEDIC)
|
|
//! Raises STALL sent
|
|
#define udd_raise_stall(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_STALLEDIS)
|
|
//! Enables STALL sent interrupt
|
|
#define udd_enable_stall_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_STALLEDES)
|
|
//! Disables STALL sent interrupt
|
|
#define udd_disable_stall_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_STALLEDEC)
|
|
//! Tests if STALL sent interrupt is enabled
|
|
#define Is_udd_stall_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_STALLEDE))
|
|
|
|
//! Tests if NAK OUT received
|
|
#define Is_udd_nak_out(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_NAKOUTI))
|
|
//! ACKs NAK OUT received
|
|
#define udd_ack_nak_out(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_NAKOUTIC)
|
|
//! Raises NAK OUT received
|
|
#define udd_raise_nak_out(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NAKOUTIS)
|
|
//! Enables NAK OUT interrupt
|
|
#define udd_enable_nak_out_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_NAKOUTES)
|
|
//! Disables NAK OUT interrupt
|
|
#define udd_disable_nak_out_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_NAKOUTEC)
|
|
//! Tests if NAK OUT interrupt is enabled
|
|
#define Is_udd_nak_out_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_NAKOUTE))
|
|
|
|
//! Tests if NAK IN received
|
|
#define Is_udd_nak_in(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_NAKINI))
|
|
//! ACKs NAK IN received
|
|
#define udd_ack_nak_in(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_NAKINIC)
|
|
//! Raises NAK IN received
|
|
#define udd_raise_nak_in(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NAKINIS)
|
|
//! Enables NAK IN interrupt
|
|
#define udd_enable_nak_in_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_NAKINES)
|
|
//! Disables NAK IN interrupt
|
|
#define udd_disable_nak_in_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_NAKINEC)
|
|
//! Tests if NAK IN interrupt is enabled
|
|
#define Is_udd_nak_in_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_NAKINE))
|
|
|
|
//! ACKs endpoint isochronous overflow interrupt
|
|
#define udd_ack_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_OVERFIC)
|
|
//! Raises endpoint isochronous overflow interrupt
|
|
#define udd_raise_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_OVERFIS)
|
|
//! Tests if an overflow occurs
|
|
#define Is_udd_overflow(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_OVERFI))
|
|
//! Enables overflow interrupt
|
|
#define udd_enable_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_OVERFES)
|
|
//! Disables overflow interrupt
|
|
#define udd_disable_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_OVERFEC)
|
|
//! Tests if overflow interrupt is enabled
|
|
#define Is_udd_overflow_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_OVERFE))
|
|
|
|
//! ACKs endpoint isochronous underflow interrupt
|
|
#define udd_ack_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_UNDERFIC)
|
|
//! Raises endpoint isochronous underflow interrupt
|
|
#define udd_raise_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_UNDERFIS)
|
|
//! Tests if an underflow occurs
|
|
#define Is_udd_underflow(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_UNDERFI))
|
|
//! Enables underflow interrupt
|
|
#define udd_enable_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_UNDERFES)
|
|
//! Disables underflow interrupt
|
|
#define udd_disable_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_UNDERFEC)
|
|
//! Tests if underflow interrupt is enabled
|
|
#define Is_udd_underflow_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_UNDERFE))
|
|
|
|
//! Tests if CRC ERROR ISO OUT detected
|
|
#define Is_udd_crc_error(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_CRCERRI))
|
|
//! ACKs CRC ERROR ISO OUT detected
|
|
#define udd_ack_crc_error(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_CRCERRIC)
|
|
//! Raises CRC ERROR ISO OUT detected
|
|
#define udd_raise_crc_error(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_CRCERRIS)
|
|
//! Enables CRC ERROR ISO OUT detected interrupt
|
|
#define udd_enable_crc_error_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_CRCERRES)
|
|
//! Disables CRC ERROR ISO OUT detected interrupt
|
|
#define udd_disable_crc_error_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_CRCERREC)
|
|
//! Tests if CRC ERROR ISO OUT detected interrupt is enabled
|
|
#define Is_udd_crc_error_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_CRCERRE))
|
|
//! @}
|
|
|
|
//! @name UOTGHS Device control endpoint transfer
|
|
//! These macros control the endpoint transfer.
|
|
//! @{
|
|
|
|
//! Tests if endpoint read allowed
|
|
#define Is_udd_read_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RWALL))
|
|
//! Tests if endpoint write allowed
|
|
#define Is_udd_write_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RWALL))
|
|
|
|
//! Returns the byte count
|
|
#define udd_byte_count(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_BYCT_Msk))
|
|
//! Clears FIFOCON bit
|
|
#define udd_ack_fifocon(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_FIFOCONC)
|
|
//! Tests if FIFOCON bit set
|
|
#define Is_udd_fifocon(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_FIFOCON))
|
|
|
|
//! Returns the number of busy banks
|
|
#define udd_nb_busy_bank(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_NBUSYBK_Msk))
|
|
//! Returns the number of the current bank
|
|
#define udd_current_bank(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_CURRBK_Msk))
|
|
//! Kills last bank
|
|
#define udd_kill_last_in_bank(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_KILLBKS)
|
|
#define Is_udd_kill_last(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_KILLBK))
|
|
//! Tests if last bank killed
|
|
#define Is_udd_last_in_bank_killed(ep) (!Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_KILLBK))
|
|
//! Forces all banks full (OUT) or free (IN) interrupt
|
|
#define udd_force_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NBUSYBKS)
|
|
//! Unforces all banks full (OUT) or free (IN) interrupt
|
|
#define udd_unforce_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NBUSYBKS)
|
|
//! Enables all banks full (OUT) or free (IN) interrupt
|
|
#define udd_enable_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_NBUSYBKES)
|
|
//! Disables all banks full (OUT) or free (IN) interrupt
|
|
#define udd_disable_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_NBUSYBKEC)
|
|
//! Tests if all banks full (OUT) or free (IN) interrupt enabled
|
|
#define Is_udd_bank_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_NBUSYBKE))
|
|
|
|
//! Tests if SHORT PACKET received
|
|
#define Is_udd_short_packet(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_SHORTPACKET))
|
|
//! ACKs SHORT PACKET received
|
|
#define udd_ack_short_packet(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_SHORTPACKETC)
|
|
//! Raises SHORT PACKET received
|
|
#define udd_raise_short_packet(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_SHORTPACKETS)
|
|
//! Enables SHORT PACKET received interrupt
|
|
#define udd_enable_short_packet_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_SHORTPACKETES)
|
|
//! Disables SHORT PACKET received interrupt
|
|
#define udd_disable_short_packet_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_SHORTPACKETEC)
|
|
//! Tests if SHORT PACKET received interrupt is enabled
|
|
#define Is_udd_short_packet_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_SHORTPACKETE))
|
|
|
|
//! Tests if SETUP received
|
|
#define Is_udd_setup_received(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RXSTPI))
|
|
//! ACKs SETUP received
|
|
#define udd_ack_setup_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_RXSTPIC)
|
|
//! Raises SETUP received
|
|
#define udd_raise_setup_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_RXSTPIS)
|
|
//! Enables SETUP received interrupt
|
|
#define udd_enable_setup_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_RXSTPES)
|
|
//! Disables SETUP received interrupt
|
|
#define udd_disable_setup_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_RXSTPEC)
|
|
//! Tests if SETUP received interrupt is enabled
|
|
#define Is_udd_setup_received_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_RXSTPE))
|
|
|
|
//! Tests if OUT received
|
|
#define Is_udd_out_received(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RXOUTI))
|
|
//! ACKs OUT received
|
|
#define udd_ack_out_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_RXOUTIC)
|
|
//! Raises OUT received
|
|
#define udd_raise_out_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_RXOUTIS)
|
|
//! Enables OUT received interrupt
|
|
#define udd_enable_out_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_RXOUTES)
|
|
//! Disables OUT received interrupt
|
|
#define udd_disable_out_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_RXOUTEC)
|
|
//! Tests if OUT received interrupt is enabled
|
|
#define Is_udd_out_received_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_RXOUTE))
|
|
|
|
//! Tests if IN sending
|
|
#define Is_udd_in_send(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_TXINI))
|
|
//! ACKs IN sending
|
|
#define udd_ack_in_send(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_TXINIC)
|
|
//! Raises IN sending
|
|
#define udd_raise_in_send(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_TXINIS)
|
|
//! Enables IN sending interrupt
|
|
#define udd_enable_in_send_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_TXINES)
|
|
//! Disables IN sending interrupt
|
|
#define udd_disable_in_send_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_TXINEC)
|
|
//! Tests if IN sending interrupt is enabled
|
|
#define Is_udd_in_send_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))
|
|
|
|
|
|
//! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
|
|
//! @param ep Endpoint of which to access FIFO data register
|
|
//! @param scale Data scale in bits: 64, 32, 16 or 8
|
|
//! @return Volatile 64-, 32-, 16- or 8-bit data pointer to FIFO data register
|
|
//! @warning It is up to the user of this macro to make sure that all accesses
|
|
//! are aligned with their natural boundaries except 64-bit accesses which
|
|
//! require only 32-bit alignment.
|
|
//! @warning It is up to the user of this macro to make sure that used HSB
|
|
//! addresses are identical to the DPRAM internal pointer modulo 32 bits.
|
|
#define udd_get_endpoint_fifo_access(ep, scale) \
|
|
(((volatile TPASTE2(U, scale) (*)[0x8000 / ((scale) / 8)])UOTGHS_RAM_ADDR)[(ep)])
|
|
|
|
//! @name UOTGHS endpoint DMA drivers
|
|
//! These macros manage the common features of the endpoint DMA channels.
|
|
//! @{
|
|
|
|
//! Maximum transfer size on USB DMA
|
|
#define UDD_ENDPOINT_MAX_TRANS 0x10000
|
|
//! Enables the disabling of HDMA requests by endpoint interrupts
|
|
#define udd_enable_endpoint_int_dis_hdma_req(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0](ep) = UOTGHS_DEVEPTIER_EPDISHDMAS)
|
|
//! Disables the disabling of HDMA requests by endpoint interrupts
|
|
#define udd_disable_endpoint_int_dis_hdma_req(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0](ep) = UOTGHS_DEVEPTIDR_EPDISHDMAC)
|
|
//! Tests if the disabling of HDMA requests by endpoint interrupts is enabled
|
|
#define Is_udd_endpoint_int_dis_hdma_req_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0](ep), UOTGHS_DEVEPTIMR_EPDISHDMA))
|
|
|
|
//! Raises the selected endpoint DMA channel interrupt
|
|
#define udd_raise_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_DMA_1 << ((ep) - 1))
|
|
//! Raises the selected endpoint DMA channel interrupt
|
|
#define udd_clear_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVISR_DMA_1 << ((ep) - 1))
|
|
//! Tests if an interrupt is triggered by the selected endpoint DMA channel
|
|
#define Is_udd_endpoint_dma_interrupt(ep) (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_DMA_1 << ((ep) - 1)))
|
|
//! Enables the selected endpoint DMA channel interrupt
|
|
#define udd_enable_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_DMA_1 << ((ep) - 1))
|
|
//! Disables the selected endpoint DMA channel interrupt
|
|
#define udd_disable_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_DMA_1 << ((ep) - 1))
|
|
//! Tests if the selected endpoint DMA channel interrupt is enabled
|
|
#define Is_udd_endpoint_dma_interrupt_enabled(ep) (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_DMA_1 << ((ep) - 1)))
|
|
|
|
//! Access points to the UOTGHS device DMA memory map with arrayed registers
|
|
//! @{
|
|
//! Structure for DMA next descriptor register
|
|
typedef struct {
|
|
uint32_t *NXT_DSC_ADD;
|
|
} uotghs_dma_nextdesc_t;
|
|
//! Structure for DMA control register
|
|
typedef struct {
|
|
uint32_t CHANN_ENB:1,
|
|
LDNXT_DSC:1,
|
|
END_TR_EN:1,
|
|
END_B_EN:1,
|
|
END_TR_IT:1,
|
|
END_BUFFIT:1,
|
|
DESC_LD_IT:1,
|
|
BUST_LCK:1,
|
|
reserved:8,
|
|
BUFF_LENGTH:16;
|
|
} uotghs_dma_control_t;
|
|
//! Structure for DMA status register
|
|
typedef struct {
|
|
uint32_t CHANN_ENB:1,
|
|
CHANN_ACT:1,
|
|
reserved0:2,
|
|
END_TR_ST:1,
|
|
END_BF_ST:1,
|
|
DESC_LDST:1,
|
|
reserved1:9,
|
|
BUFF_COUNT:16;
|
|
} uotghs_dma_status_t;
|
|
//! Structure for DMA descriptor
|
|
typedef struct {
|
|
union {
|
|
uint32_t nextdesc;
|
|
uotghs_dma_nextdesc_t NEXTDESC;
|
|
};
|
|
uint32_t addr;
|
|
union {
|
|
uint32_t control;
|
|
uotghs_dma_control_t CONTROL;
|
|
};
|
|
uint32_t reserved;
|
|
} sam_uotghs_dmadesc_t, uotghs_dmadesc_t;
|
|
//! Structure for DMA registers in a channel
|
|
typedef struct {
|
|
union {
|
|
uint32_t nextdesc;
|
|
uotghs_dma_nextdesc_t NEXTDESC;
|
|
};
|
|
uint32_t addr;
|
|
union {
|
|
uint32_t control;
|
|
uotghs_dma_control_t CONTROL;
|
|
};
|
|
union {
|
|
unsigned long status;
|
|
uotghs_dma_status_t STATUS;
|
|
};
|
|
} sam_uotghs_dmach_t, uotghs_dmach_t;
|
|
//! DMA channel control command
|
|
#define UDD_ENDPOINT_DMA_STOP_NOW (0)
|
|
#define UDD_ENDPOINT_DMA_RUN_AND_STOP (UOTGHS_DEVDMACONTROL_CHANN_ENB)
|
|
#define UDD_ENDPOINT_DMA_LOAD_NEXT_DESC (UOTGHS_DEVDMACONTROL_LDNXT_DSC)
|
|
#define UDD_ENDPOINT_DMA_RUN_AND_LINK (UOTGHS_DEVDMACONTROL_CHANN_ENB|UOTGHS_DEVDMACONTROL_LDNXT_DSC)
|
|
//! Structure for DMA registers
|
|
#define UOTGHS_UDDMA_ARRAY(ep) (((volatile uotghs_dmach_t *)UOTGHS->UOTGHS_DEVDMA)[(ep) - 1])
|
|
|
|
//! Set control desc to selected endpoint DMA channel
|
|
#define udd_endpoint_dma_set_control(ep,desc) (UOTGHS_UDDMA_ARRAY(ep).control = desc)
|
|
//! Get control desc to selected endpoint DMA channel
|
|
#define udd_endpoint_dma_get_control(ep) (UOTGHS_UDDMA_ARRAY(ep).control)
|
|
//! Set RAM address to selected endpoint DMA channel
|
|
#define udd_endpoint_dma_set_addr(ep,add) (UOTGHS_UDDMA_ARRAY(ep).addr = add)
|
|
//! Get status to selected endpoint DMA channel
|
|
#define udd_endpoint_dma_get_status(ep) (UOTGHS_UDDMA_ARRAY(ep).status)
|
|
//! @}
|
|
//! @}
|
|
|
|
//! @}
|
|
//! @}
|
|
//! @}
|
|
//! @}
|
|
|
|
|
|
/// @cond 0
|
|
/**INDENT-OFF**/
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
/**INDENT-ON**/
|
|
/// @endcond
|
|
|
|
#endif /* UOTGHS_DEVICE_H_INCLUDED */
|