Firmware2/Marlin/pins_MEGACONTROLLER.h
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
2015-08-02 21:59:41 -05:00

113 lines
2.5 KiB
C

/**
* Mega controller pin assignments
*/
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#if EXTRUDERS > 2
#error Mega Controller supports up to 2 extruders. Comment this line to keep going.
#endif
#ifdef NUM_SERVOS
#define SERVO0_PIN 30
#if NUM_SERVOS > 1
#define SERVO1_PIN 31
#if NUM_SERVOS > 2
#define SERVO2_PIN 32
#if NUM_SERVOS > 3
#define SERVO3_PIN 33
#endif
#endif
#endif
#endif // NUM_SERVOS
#define X_STEP_PIN 62//A8
#define X_DIR_PIN 63//A9
#define X_ENABLE_PIN 61//A7
#define X_MIN_PIN 43
#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64//A10
#define Y_MIN_PIN 38
#define Y_MAX_PIN 41
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define Z_MIN_PIN 40
#define Z_MAX_PIN 37
#define E0_STEP_PIN 23
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 22
#define E1_STEP_PIN 26
#define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 39
#define FAN1_PIN 35
#define FAN2_PIN 36
#define FAN_SOFT_PWM
#define CONTROLLERFAN_PIN 36
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 29 // EXTRUDER 1
#define HEATER_1_PIN 34 // EXTRUDER 2
#define HEATER_2_PIN -1
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 0 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 2 // ANALOG NUMBERING
#endif
#define TEMP_2_PIN 3 // ANALOG NUMBERING
#define HEATER_BED_PIN 28 // BED
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 1 // ANALOG NUMBERING
#endif
#ifdef MINIPANEL
#define BEEPER_PIN 46
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47
#define DOGLCD_CS 45
#define LCD_PIN_BL 44 // backlight LED on PA3
#define KILL_PIN 12
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 48
#define BTN_EN2 11
#define BTN_ENC 10 //the click switch
//not connected to a pin
#define SD_DETECT_PIN 49
#endif //Minipanel