3f45a1acf9
Aim: Test probes in update_endstops only when activated Changes: Configurations Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message. Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin Add some comments Shift some entries to have related things together. Conditionals.h We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined. SanityCheck.h Add some tests if the probe is connected and if we have defined a probe. stepper.cpp Changes to test the probe only when it is deployed (z_probe_is_active). Test update_endstops() when the probe is deployed. MarlinMain.cpp a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled() b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions. d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop. To do: In another PR. handle all probes in deploy/stow_z_probe. Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS. |
||
|---|---|---|
| .. | ||
| Configuration_adv.h | ||
| Configuration.h | ||