319 lines
12 KiB
C++
319 lines
12 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* MarlinSerial.h - Hardware serial library for Wiring
|
|
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
|
|
*
|
|
* Modified 28 September 2010 by Mark Sproul
|
|
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
|
|
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
|
|
* Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
|
|
*/
|
|
|
|
#include <WString.h>
|
|
|
|
#include "../../inc/MarlinConfigPre.h"
|
|
|
|
#ifndef SERIAL_PORT
|
|
#define SERIAL_PORT 0
|
|
#endif
|
|
|
|
#ifndef USBCON
|
|
|
|
// The presence of the UBRRH register is used to detect a UART.
|
|
#define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \
|
|
(port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
|
|
(port == 3 && defined(UBRR3H)))
|
|
|
|
// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
|
|
// requires two levels of indirection to expand macro values properly)
|
|
#define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
|
|
#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
|
|
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
|
|
#else
|
|
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
|
|
#endif
|
|
|
|
// Registers used by MarlinSerial class (expanded depending on selected serial port)
|
|
|
|
// Templated 8bit register (generic)
|
|
#define UART_REGISTER_DECL_BASE(registerbase, suffix) \
|
|
template<int portNr> struct R_##registerbase##x##suffix {}
|
|
|
|
// Templated 8bit register (specialization for each port)
|
|
#define UART_REGISTER_DECL(port, registerbase, suffix) \
|
|
template<> struct R_##registerbase##x##suffix<port> { \
|
|
constexpr R_##registerbase##x##suffix(int) {} \
|
|
FORCE_INLINE void operator=(uint8_t newVal) const { SERIAL_REGNAME(registerbase,port,suffix) = newVal; } \
|
|
FORCE_INLINE operator uint8_t() const { return SERIAL_REGNAME(registerbase,port,suffix); } \
|
|
}
|
|
|
|
// Templated 1bit register (generic)
|
|
#define UART_BIT_DECL_BASE(registerbase, suffix, bit) \
|
|
template<int portNr>struct B_##bit##x {}
|
|
|
|
// Templated 1bit register (specialization for each port)
|
|
#define UART_BIT_DECL(port, registerbase, suffix, bit) \
|
|
template<> struct B_##bit##x<port> { \
|
|
constexpr B_##bit##x(int) {} \
|
|
FORCE_INLINE void operator=(int newVal) const { \
|
|
if (newVal) \
|
|
SBI(SERIAL_REGNAME(registerbase,port,suffix),SERIAL_REGNAME(bit,port,)); \
|
|
else \
|
|
CBI(SERIAL_REGNAME(registerbase,port,suffix),SERIAL_REGNAME(bit,port,)); \
|
|
} \
|
|
FORCE_INLINE operator bool() const { return TEST(SERIAL_REGNAME(registerbase,port,suffix),SERIAL_REGNAME(bit,port,)); } \
|
|
}
|
|
|
|
#define UART_DECL_BASE() \
|
|
UART_REGISTER_DECL_BASE(UCSR,A);\
|
|
UART_REGISTER_DECL_BASE(UDR,);\
|
|
UART_REGISTER_DECL_BASE(UBRR,H);\
|
|
UART_REGISTER_DECL_BASE(UBRR,L);\
|
|
UART_BIT_DECL_BASE(UCSR,B,RXEN);\
|
|
UART_BIT_DECL_BASE(UCSR,B,TXEN);\
|
|
UART_BIT_DECL_BASE(UCSR,A,TXC);\
|
|
UART_BIT_DECL_BASE(UCSR,B,RXCIE);\
|
|
UART_BIT_DECL_BASE(UCSR,A,UDRE);\
|
|
UART_BIT_DECL_BASE(UCSR,A,FE);\
|
|
UART_BIT_DECL_BASE(UCSR,A,DOR);\
|
|
UART_BIT_DECL_BASE(UCSR,B,UDRIE);\
|
|
UART_BIT_DECL_BASE(UCSR,A,RXC);\
|
|
UART_BIT_DECL_BASE(UCSR,A,U2X)
|
|
|
|
#define UART_DECL(port) \
|
|
UART_REGISTER_DECL(port,UCSR,A);\
|
|
UART_REGISTER_DECL(port,UDR,);\
|
|
UART_REGISTER_DECL(port,UBRR,H);\
|
|
UART_REGISTER_DECL(port,UBRR,L);\
|
|
UART_BIT_DECL(port,UCSR,B,RXEN);\
|
|
UART_BIT_DECL(port,UCSR,B,TXEN);\
|
|
UART_BIT_DECL(port,UCSR,A,TXC);\
|
|
UART_BIT_DECL(port,UCSR,B,RXCIE);\
|
|
UART_BIT_DECL(port,UCSR,A,UDRE);\
|
|
UART_BIT_DECL(port,UCSR,A,FE);\
|
|
UART_BIT_DECL(port,UCSR,A,DOR);\
|
|
UART_BIT_DECL(port,UCSR,B,UDRIE);\
|
|
UART_BIT_DECL(port,UCSR,A,RXC);\
|
|
UART_BIT_DECL(port,UCSR,A,U2X)
|
|
|
|
// Declare empty templates
|
|
UART_DECL_BASE();
|
|
|
|
// And all the specializations for each possible serial port
|
|
#if UART_PRESENT(0)
|
|
UART_DECL(0);
|
|
#endif
|
|
#if UART_PRESENT(1)
|
|
UART_DECL(1);
|
|
#endif
|
|
#if UART_PRESENT(2)
|
|
UART_DECL(2);
|
|
#endif
|
|
#if UART_PRESENT(3)
|
|
UART_DECL(3);
|
|
#endif
|
|
|
|
#define DEC 10
|
|
#define HEX 16
|
|
#define OCT 8
|
|
#define BIN 2
|
|
#define BYTE 0
|
|
|
|
// Templated type selector
|
|
template<bool b, typename T, typename F> struct TypeSelector { typedef T type;} ;
|
|
template<typename T, typename F> struct TypeSelector<false, T, F> { typedef F type; };
|
|
|
|
template<typename Cfg>
|
|
class MarlinSerial {
|
|
protected:
|
|
// Registers
|
|
static constexpr R_UCSRxA<Cfg::PORT> R_UCSRA = 0;
|
|
static constexpr R_UDRx<Cfg::PORT> R_UDR = 0;
|
|
static constexpr R_UBRRxH<Cfg::PORT> R_UBRRH = 0;
|
|
static constexpr R_UBRRxL<Cfg::PORT> R_UBRRL = 0;
|
|
|
|
// Bits
|
|
static constexpr B_RXENx<Cfg::PORT> B_RXEN = 0;
|
|
static constexpr B_TXENx<Cfg::PORT> B_TXEN = 0;
|
|
static constexpr B_TXCx<Cfg::PORT> B_TXC = 0;
|
|
static constexpr B_RXCIEx<Cfg::PORT> B_RXCIE = 0;
|
|
static constexpr B_UDREx<Cfg::PORT> B_UDRE = 0;
|
|
static constexpr B_FEx<Cfg::PORT> B_FE = 0;
|
|
static constexpr B_DORx<Cfg::PORT> B_DOR = 0;
|
|
static constexpr B_UDRIEx<Cfg::PORT> B_UDRIE = 0;
|
|
static constexpr B_RXCx<Cfg::PORT> B_RXC = 0;
|
|
static constexpr B_U2Xx<Cfg::PORT> B_U2X = 0;
|
|
|
|
// Base size of type on buffer size
|
|
typedef typename TypeSelector<(Cfg::RX_SIZE>256), uint16_t, uint8_t>::type ring_buffer_pos_t;
|
|
|
|
struct ring_buffer_r {
|
|
volatile ring_buffer_pos_t head, tail;
|
|
unsigned char buffer[Cfg::RX_SIZE];
|
|
};
|
|
|
|
struct ring_buffer_t {
|
|
volatile uint8_t head, tail;
|
|
unsigned char buffer[Cfg::TX_SIZE];
|
|
};
|
|
|
|
static ring_buffer_r rx_buffer;
|
|
static ring_buffer_t tx_buffer;
|
|
static bool _written;
|
|
|
|
static constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80, // XON / XOFF Character was sent
|
|
XON_XOFF_CHAR_MASK = 0x1F; // XON / XOFF character to send
|
|
|
|
// XON / XOFF character definitions
|
|
static constexpr uint8_t XON_CHAR = 17, XOFF_CHAR = 19;
|
|
static uint8_t xon_xoff_state,
|
|
rx_dropped_bytes,
|
|
rx_buffer_overruns,
|
|
rx_framing_errors;
|
|
static ring_buffer_pos_t rx_max_enqueued;
|
|
|
|
static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head();
|
|
|
|
static volatile bool rx_tail_value_not_stable;
|
|
static volatile uint16_t rx_tail_value_backup;
|
|
|
|
static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value);
|
|
static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail();
|
|
|
|
public:
|
|
|
|
FORCE_INLINE static void store_rxd_char();
|
|
FORCE_INLINE static void _tx_udr_empty_irq();
|
|
|
|
public:
|
|
MarlinSerial() {};
|
|
static void begin(const long);
|
|
static void end();
|
|
static int peek();
|
|
static int read();
|
|
static void flush();
|
|
static ring_buffer_pos_t available();
|
|
static void write(const uint8_t c);
|
|
static void flushTX();
|
|
#ifdef DGUS_SERIAL_PORT
|
|
static ring_buffer_pos_t get_tx_buffer_free();
|
|
#endif
|
|
|
|
FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
|
|
FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
|
|
FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
|
|
FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
|
|
|
|
FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
|
|
FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
|
|
FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
|
|
FORCE_INLINE static void print(const char* str) { write(str); }
|
|
|
|
static void print(char, int = BYTE);
|
|
static void print(unsigned char, int = BYTE);
|
|
static void print(int, int = DEC);
|
|
static void print(unsigned int, int = DEC);
|
|
static void print(long, int = DEC);
|
|
static void print(unsigned long, int = DEC);
|
|
static void print(double, int = 2);
|
|
|
|
static void println(const String& s);
|
|
static void println(const char[]);
|
|
static void println(char, int = BYTE);
|
|
static void println(unsigned char, int = BYTE);
|
|
static void println(int, int = DEC);
|
|
static void println(unsigned int, int = DEC);
|
|
static void println(long, int = DEC);
|
|
static void println(unsigned long, int = DEC);
|
|
static void println(double, int = 2);
|
|
static void println();
|
|
operator bool() { return true; }
|
|
|
|
private:
|
|
static void printNumber(unsigned long, const uint8_t);
|
|
static void printFloat(double, uint8_t);
|
|
};
|
|
|
|
template <uint8_t serial>
|
|
struct MarlinSerialCfg {
|
|
static constexpr int PORT = serial;
|
|
static constexpr unsigned int RX_SIZE = RX_BUFFER_SIZE;
|
|
static constexpr unsigned int TX_SIZE = TX_BUFFER_SIZE;
|
|
static constexpr bool XONOFF = ENABLED(SERIAL_XON_XOFF);
|
|
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
|
|
static constexpr bool DROPPED_RX = ENABLED(SERIAL_STATS_DROPPED_RX);
|
|
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
|
|
static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
|
|
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
|
|
};
|
|
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
|
|
|
|
#ifdef SERIAL_PORT_2
|
|
|
|
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
|
|
|
|
#endif
|
|
|
|
#endif // !USBCON
|
|
|
|
#ifdef INTERNAL_SERIAL_PORT
|
|
template <uint8_t serial>
|
|
struct MarlinInternalSerialCfg {
|
|
static constexpr int PORT = serial;
|
|
static constexpr unsigned int RX_SIZE = 32;
|
|
static constexpr unsigned int TX_SIZE = 32;
|
|
static constexpr bool XONOFF = false;
|
|
static constexpr bool EMERGENCYPARSER = false;
|
|
static constexpr bool DROPPED_RX = false;
|
|
static constexpr bool RX_OVERRUNS = false;
|
|
static constexpr bool RX_FRAMING_ERRORS = false;
|
|
static constexpr bool MAX_RX_QUEUED = false;
|
|
};
|
|
|
|
extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
|
|
#endif
|
|
|
|
#ifdef DGUS_SERIAL_PORT
|
|
template <uint8_t serial>
|
|
struct MarlinInternalSerialCfg {
|
|
static constexpr int PORT = serial;
|
|
static constexpr unsigned int RX_SIZE = DGUS_RX_BUFFER_SIZE;
|
|
static constexpr unsigned int TX_SIZE = DGUS_TX_BUFFER_SIZE;
|
|
static constexpr bool XONOFF = false;
|
|
static constexpr bool EMERGENCYPARSER = false;
|
|
static constexpr bool DROPPED_RX = false;
|
|
static constexpr bool RX_OVERRUNS = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
|
|
static constexpr bool RX_FRAMING_ERRORS = false;
|
|
static constexpr bool MAX_RX_QUEUED = false;
|
|
};
|
|
|
|
extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
|
|
#endif
|
|
|
|
// Use the UART for Bluetooth in AT90USB configurations
|
|
#if defined(USBCON) && ENABLED(BLUETOOTH)
|
|
extern HardwareSerial bluetoothSerial;
|
|
#endif
|