114 lines
2.7 KiB
C
114 lines
2.7 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Minitronics v1.0/1.1 pin assignments
|
|
*/
|
|
|
|
#ifndef __AVR_ATmega1281__
|
|
#error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#define BOARD_NAME "Minitronics v1.0 / v1.1"
|
|
#define LARGE_FLASH true
|
|
|
|
#define X_STEP_PIN 48
|
|
#define X_DIR_PIN 47
|
|
#define X_ENABLE_PIN 49
|
|
#define X_MIN_PIN 5
|
|
#define X_MAX_PIN 2
|
|
|
|
#define Y_STEP_PIN 39 // A6
|
|
#define Y_DIR_PIN 40 // A0
|
|
#define Y_ENABLE_PIN 38
|
|
#define Y_MIN_PIN 2
|
|
#define Y_MAX_PIN 15
|
|
|
|
#define Z_STEP_PIN 42 // A2
|
|
#define Z_DIR_PIN 43 // A6
|
|
#define Z_ENABLE_PIN 41 // A1
|
|
#define Z_MIN_PIN 6
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 45
|
|
#define E0_DIR_PIN 44
|
|
#define E0_ENABLE_PIN 27
|
|
|
|
#define E1_STEP_PIN 36
|
|
#define E1_DIR_PIN 35
|
|
#define E1_ENABLE_PIN 37
|
|
|
|
#define E2_STEP_PIN -1
|
|
#define E2_DIR_PIN -1
|
|
#define E2_ENABLE_PIN -1
|
|
|
|
#define SDSS 16
|
|
#define LED_PIN 46
|
|
|
|
#define FAN_PIN 9
|
|
|
|
#define TEMP_0_PIN 7 // ANALOG NUMBERING
|
|
#define TEMP_1_PIN 6 // ANALOG NUMBERING
|
|
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
|
|
|
|
#define HEATER_0_PIN 7 // EXTRUDER 1
|
|
#define HEATER_1_PIN 8 // EXTRUDER 2
|
|
#define HEATER_BED_PIN 3 // BED
|
|
|
|
/**
|
|
* Controllers and LCDs
|
|
*/
|
|
#define BEEPER_PIN -1
|
|
|
|
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
|
|
|
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
|
|
#define LCD_PINS_ENABLE 11 // SID (MOSI)
|
|
#define LCD_PINS_D4 10 // SCK (CLK) clock
|
|
|
|
#define BTN_EN1 18
|
|
#define BTN_EN2 17
|
|
#define BTN_ENC 25
|
|
|
|
#define SD_DETECT_PIN 30
|
|
|
|
#else
|
|
|
|
#define LCD_PINS_RS -1
|
|
#define LCD_PINS_ENABLE -1
|
|
#define LCD_PINS_D4 -1
|
|
#define LCD_PINS_D5 -1
|
|
#define LCD_PINS_D6 -1
|
|
#define LCD_PINS_D7 -1
|
|
|
|
// Buttons are directly attached using keypad
|
|
#define BTN_EN1 -1
|
|
#define BTN_EN2 -1
|
|
#define BTN_ENC -1
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
|
|
#endif
|