Firmware2/Marlin/src/feature/power_monitor.h
2021-04-29 08:45:08 -05:00

143 lines
4.7 KiB
C++

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../inc/MarlinConfig.h"
#define PM_SAMPLE_RANGE 1024
#define PM_K_VALUE 6
#define PM_K_SCALE 6
template <const float & SCALE, int K_VALUE, int K_SCALE>
struct pm_lpf_t {
uint32_t filter_buf;
float value;
void add_sample(const uint16_t sample) {
filter_buf = filter_buf - (filter_buf >> K_VALUE) + (uint32_t(sample) << K_SCALE);
}
void capture() {
value = filter_buf * (SCALE * (1.0f / (1UL << (PM_K_VALUE + PM_K_SCALE)))) + (POWER_MONITOR_CURRENT_OFFSET);
}
void reset(uint16_t reset_value = 0) {
filter_buf = uint32_t(reset_value) << (K_VALUE + K_SCALE);
capture();
}
};
class PowerMonitor {
private:
#if ENABLED(POWER_MONITOR_CURRENT)
static constexpr float amps_adc_scale = float(ADC_VREF) / (POWER_MONITOR_VOLTS_PER_AMP * PM_SAMPLE_RANGE);
static pm_lpf_t<amps_adc_scale, PM_K_VALUE, PM_K_SCALE> amps;
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
static constexpr float volts_adc_scale = float(ADC_VREF) / (POWER_MONITOR_VOLTS_PER_VOLT * PM_SAMPLE_RANGE);
static pm_lpf_t<volts_adc_scale, PM_K_VALUE, PM_K_SCALE> volts;
#endif
public:
static uint8_t flags; // M430 flags to display current
static millis_t display_item_ms;
static uint8_t display_item;
PowerMonitor() { reset(); }
enum PM_Display_Bit : uint8_t {
PM_DISP_BIT_I, // Current display enable bit
PM_DISP_BIT_V, // Voltage display enable bit
PM_DISP_BIT_P // Power display enable bit
};
#if ENABLED(POWER_MONITOR_CURRENT)
FORCE_INLINE static float getAmps() { return amps.value; }
void add_current_sample(const uint16_t value) { amps.add_sample(value); }
#endif
#if HAS_POWER_MONITOR_VREF
#if ENABLED(POWER_MONITOR_VOLTAGE)
FORCE_INLINE static float getVolts() { return volts.value; }
#else
FORCE_INLINE static float getVolts() { return POWER_MONITOR_FIXED_VOLTAGE; } // using a specified fixed valtage as the voltage measurement
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
void add_voltage_sample(const uint16_t value) { volts.add_sample(value); }
#endif
#endif
#if HAS_POWER_MONITOR_WATTS
FORCE_INLINE static float getPower() { return getAmps() * getVolts(); }
#endif
#if HAS_WIRED_LCD
#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI)
FORCE_INLINE static bool display_enabled() { return flags != 0x00; }
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
static void draw_current();
FORCE_INLINE static bool current_display_enabled() { return TEST(flags, PM_DISP_BIT_I); }
FORCE_INLINE static void set_current_display(const bool b) { SET_BIT_TO(flags, PM_DISP_BIT_I, b); }
FORCE_INLINE static void toggle_current_display() { TBI(flags, PM_DISP_BIT_I); }
#endif
#if HAS_POWER_MONITOR_VREF
static void draw_voltage();
FORCE_INLINE static bool voltage_display_enabled() { return TEST(flags, PM_DISP_BIT_V); }
FORCE_INLINE static void set_voltage_display(const bool b) { SET_BIT_TO(flags, PM_DISP_BIT_V, b); }
FORCE_INLINE static void toggle_voltage_display() { TBI(flags, PM_DISP_BIT_V); }
#endif
#if HAS_POWER_MONITOR_WATTS
static void draw_power();
FORCE_INLINE static bool power_display_enabled() { return TEST(flags, PM_DISP_BIT_P); }
FORCE_INLINE static void set_power_display(const bool b) { SET_BIT_TO(flags, PM_DISP_BIT_P, b); }
FORCE_INLINE static void toggle_power_display() { TBI(flags, PM_DISP_BIT_P); }
#endif
#endif
static void reset() {
flags = 0x00;
#if ENABLED(POWER_MONITOR_CURRENT)
amps.reset();
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
volts.reset();
#endif
#if ENABLED(SDSUPPORT)
display_item_ms = 0;
display_item = 0;
#endif
}
static void capture_values() {
#if ENABLED(POWER_MONITOR_CURRENT)
amps.capture();
#endif
#if ENABLED(POWER_MONITOR_VOLTAGE)
volts.capture();
#endif
}
};
extern PowerMonitor power_monitor;