Firmware2/Marlin/src/lcd/menu/menu_main.cpp
2019-01-27 22:43:13 -06:00

208 lines
5.5 KiB
C++

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Main Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU
#include "menu.h"
#include "../../module/temperature.h"
#include "../../gcode/queue.h"
#include "../../module/printcounter.h"
#include "../../module/stepper.h"
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../feature/power_loss_recovery.h"
#endif
#if ENABLED(SDSUPPORT)
#include "../../sd/cardreader.h"
#endif
void lcd_pause() {
#if ENABLED(POWER_LOSS_RECOVERY)
if (recovery.enabled) recovery.save(true, false);
#endif
#if ENABLED(PARK_HEAD_ON_PAUSE)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT, active_extruder);
enqueue_and_echo_commands_P(PSTR("M25 P; \n M24"));
#elif ENABLED(SDSUPPORT)
enqueue_and_echo_commands_P(PSTR("M25"));
#elif defined(ACTION_ON_PAUSE)
host_action_pause();
#endif
planner.synchronize();
}
void lcd_resume() {
#if ENABLED(SDSUPPORT)
if (card.isPaused()) enqueue_and_echo_commands_P(PSTR("M24"));
#elif defined(ACTION_ON_RESUME)
host_action_resume();
#endif
}
void lcd_stop() {
#if ENABLED(SDSUPPORT)
wait_for_heatup = wait_for_user = false;
card.flag.abort_sd_printing = true;
#endif
#ifdef ACTION_ON_CANCEL
host_action_cancel();
#endif
ui.set_status_P(PSTR(MSG_PRINT_ABORTED), -1);
ui.return_to_status();
}
void menu_abort_confirm() {
START_MENU();
MENU_BACK(MSG_MAIN);
MENU_ITEM(function, MSG_STOP_PRINT, lcd_stop);
END_MENU();
}
void menu_tune();
void menu_motion();
void menu_temperature();
void menu_configuration();
void menu_user();
void menu_temp_e0_filament_change();
void menu_change_filament();
void menu_info();
void menu_led();
void menu_main() {
START_MENU();
MENU_BACK(MSG_WATCH);
const bool busy = printer_busy();
if (busy) {
MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_pause);
#if ENABLED(SDSUPPORT) || defined(ACTION_ON_CANCEL)
MENU_ITEM(submenu, MSG_STOP_PRINT, menu_abort_confirm);
#endif
#if !defined(ACTION_ON_RESUME) && ENABLED(SDSUPPORT)
if (card.isFileOpen())
#endif
MENU_ITEM(submenu, MSG_TUNE, menu_tune);
}
else {
#if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
#endif
if (card.isDetected()) {
if (!card.isFileOpen()) {
MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21")); // SD-card changed by user
#endif
}
}
else {
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually init SD-card
#endif
MENU_ITEM(function, MSG_NO_CARD, NULL);
}
#endif // !HAS_ENCODER_WHEEL && SDSUPPORT
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_resume);
MENU_ITEM(submenu, MSG_MOTION, menu_motion);
MENU_ITEM(submenu, MSG_TEMPERATURE, menu_temperature);
}
MENU_ITEM(submenu, MSG_CONFIGURATION, menu_configuration);
#if ENABLED(CUSTOM_USER_MENUS)
MENU_ITEM(submenu, MSG_USER_MENU, menu_user);
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
else
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, menu_temp_e0_filament_change);
#else
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, menu_change_filament);
#endif
#endif
#if ENABLED(LCD_INFO_MENU)
MENU_ITEM(submenu, MSG_INFO_MENU, menu_info);
#endif
#if ENABLED(LED_CONTROL_MENU)
MENU_ITEM(submenu, MSG_LED_CONTROL, menu_led);
#endif
//
// Switch power on/off
//
#if HAS_POWER_SWITCH
if (powersupply_on)
MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
else
MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
#endif
#if HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
#endif
if (card.isDetected()) {
if (!card.isFileOpen()) {
MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21")); // SD-card changed by user
#endif
}
}
else {
#if !PIN_EXISTS(SD_DETECT)
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually init SD-card
#endif
MENU_ITEM(function, MSG_NO_CARD, NULL);
}
#endif // HAS_ENCODER_WHEEL && SDSUPPORT
END_MENU();
}
#endif // HAS_LCD_MENU