9e699811d2
* Merging early because of build failures. See #8105 * Make LPC1768 pinmapping not specific to Re-ARM * Add HAL_PIN_TYPE and LPC1768 pin features * M43 Updates * Move pin map into pinsDebug_LPC1768.h * Incorporate comments and M226 * Fix persistent store compilation issues * Update pin features * Update MKS SBASE pins * Use native LPC1768 pin numbers in M42, M43, and M226
161 lines
6.8 KiB
C++
161 lines
6.8 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Based on servo.cpp - Interrupt driven Servo library for Arduino using 16 bit
|
|
* timers- Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
|
|
*/
|
|
|
|
/**
|
|
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
|
|
* The servos are pulsed in the background using the value most recently written using the write() method
|
|
*
|
|
* Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
|
|
* Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
|
|
*
|
|
* The methods are:
|
|
*
|
|
* Servo - Class for manipulating servo motors connected to Arduino pins.
|
|
*
|
|
* attach(pin) - Attach a servo motor to an i/o pin.
|
|
* attach(pin, min, max) - Attach to a pin, setting min and max values in microseconds
|
|
* Default min is 544, max is 2400
|
|
*
|
|
* write() - Set the servo angle in degrees. (Invalid angles —over MIN_PULSE_WIDTH— are treated as µs.)
|
|
* writeMicroseconds() - Set the servo pulse width in microseconds.
|
|
* move(pin, angle) - Sequence of attach(pin), write(angle), delay(SERVO_DELAY).
|
|
* With DEACTIVATE_SERVOS_AFTER_MOVE it detaches after SERVO_DELAY.
|
|
* read() - Get the last-written servo pulse width as an angle between 0 and 180.
|
|
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
|
|
* attached() - Return true if a servo is attached.
|
|
* detach() - Stop an attached servo from pulsing its i/o pin.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* The only time that this library wants physical movement is when a WRITE
|
|
* command is issued. Before that all the attach & detach activity is solely
|
|
* within the data base.
|
|
*
|
|
* The PWM output is inactive until the first WRITE. After that it stays active
|
|
* unless DEACTIVATE_SERVOS_AFTER_MOVE is enabled and a MOVE command was issued.
|
|
*/
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
|
|
#if HAS_SERVOS && defined(TARGET_LPC1768)
|
|
|
|
#include "LPC1768_PWM.h"
|
|
#include "LPC1768_Servo.h"
|
|
#include "servo_private.h"
|
|
|
|
ServoInfo_t servo_info[MAX_SERVOS]; // static array of servo info structures
|
|
uint8_t ServoCount = 0; // the total number of attached servos
|
|
|
|
#define US_TO_PULSE_WIDTH(p) p
|
|
#define PULSE_WIDTH_TO_US(p) p
|
|
#define TRIM_DURATION 0
|
|
#define SERVO_MIN() MIN_PULSE_WIDTH // minimum value in uS for this servo
|
|
#define SERVO_MAX() MAX_PULSE_WIDTH // maximum value in uS for this servo
|
|
|
|
Servo::Servo() {
|
|
if (ServoCount < MAX_SERVOS) {
|
|
this->servoIndex = ServoCount++; // assign a servo index to this instance
|
|
servo_info[this->servoIndex].pulse_width = US_TO_PULSE_WIDTH(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009
|
|
}
|
|
else
|
|
this->servoIndex = INVALID_SERVO; // too many servos
|
|
}
|
|
|
|
int8_t Servo::attach(const int pin) {
|
|
return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH);
|
|
}
|
|
|
|
int8_t Servo::attach(const int pin, const int min, const int max) {
|
|
|
|
if (this->servoIndex >= MAX_SERVOS) return -1;
|
|
|
|
if (pin > 0) servo_info[this->servoIndex].Pin.nbr = pin; // only assign a pin value if the pin info is
|
|
// greater than zero. This way the init routine can
|
|
// assign the pin and the MOVE command only needs the value.
|
|
|
|
this->min = MIN_PULSE_WIDTH; //resolution of min/max is 1 uS
|
|
this->max = MAX_PULSE_WIDTH;
|
|
|
|
servo_info[this->servoIndex].Pin.isActive = true;
|
|
|
|
return this->servoIndex;
|
|
}
|
|
|
|
void Servo::detach() {
|
|
servo_info[this->servoIndex].Pin.isActive = false;
|
|
}
|
|
|
|
void Servo::write(int value) {
|
|
if (value < MIN_PULSE_WIDTH) { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
|
|
value = map(constrain(value, 0, 180), 0, 180, SERVO_MIN(), SERVO_MAX());
|
|
// odd - this sets zero degrees to 544 and 180 degrees to 2400 microseconds but the literature says
|
|
// zero degrees should be 500 microseconds and 180 should be 2500
|
|
}
|
|
this->writeMicroseconds(value);
|
|
}
|
|
|
|
void Servo::writeMicroseconds(int value) {
|
|
// calculate and store the values for the given channel
|
|
byte channel = this->servoIndex;
|
|
if (channel < MAX_SERVOS) { // ensure channel is valid
|
|
// ensure pulse width is valid
|
|
value = constrain(value, SERVO_MIN(), SERVO_MAX()) - (TRIM_DURATION);
|
|
value = US_TO_PULSE_WIDTH(value); // convert to pulse_width after compensating for interrupt overhead - 12 Aug 2009
|
|
|
|
servo_info[channel].pulse_width = value;
|
|
LPC1768_PWM_attach_pin(servo_info[this->servoIndex].Pin.nbr, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH, this->servoIndex);
|
|
LPC1768_PWM_write(servo_info[this->servoIndex].Pin.nbr, value);
|
|
|
|
}
|
|
}
|
|
|
|
// return the value as degrees
|
|
int Servo::read() { return map(this->readMicroseconds() + 1, SERVO_MIN(), SERVO_MAX(), 0, 180); }
|
|
|
|
int Servo::readMicroseconds() {
|
|
return (this->servoIndex == INVALID_SERVO) ? 0 : PULSE_WIDTH_TO_US(servo_info[this->servoIndex].pulse_width) + TRIM_DURATION;
|
|
}
|
|
|
|
bool Servo::attached() { return servo_info[this->servoIndex].Pin.isActive; }
|
|
|
|
void Servo::move(const int value) {
|
|
constexpr uint16_t servo_delay[] = SERVO_DELAY;
|
|
static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
|
|
if (this->attach(0) >= 0) { // notice the pin number is zero here
|
|
this->write(value);
|
|
delay(servo_delay[this->servoIndex]);
|
|
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
|
|
this->detach();
|
|
LPC1768_PWM_detach_pin(servo_info[this->servoIndex].Pin.nbr); // shut down the PWM signal
|
|
LPC1768_PWM_attach_pin(servo_info[this->servoIndex].Pin.nbr, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH, this->servoIndex); // make sure no one else steals the slot
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#endif // HAS_SERVOS && TARGET_LPC1768
|