416 lines
25 KiB
C
416 lines
25 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* Korean
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#define CHARSIZE 1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME _UxGT(" 준비.")
|
|
#define MSG_BACK _UxGT("뒤로")
|
|
#define MSG_MEDIA_INSERTED _UxGT("카드 삽입됨")
|
|
#define MSG_MEDIA_REMOVED _UxGT("카드 제거됨")
|
|
#define MSG_LCD_ENDSTOPS _UxGT("엔드스탑")
|
|
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("소프트 엔드스탑")
|
|
#define MSG_MAIN _UxGT("뒤로")
|
|
#define MSG_ADVANCED_SETTINGS _UxGT("고급 설정")
|
|
#define MSG_CONFIGURATION _UxGT("설정")
|
|
#define MSG_AUTOSTART _UxGT("자동 시작")
|
|
#define MSG_DISABLE_STEPPERS _UxGT("모터 정지")
|
|
#define MSG_DEBUG_MENU _UxGT("디버깅 메뉴")
|
|
#define MSG_PROGRESS_BAR_TEST _UxGT("프로그레스바 테스트")
|
|
#define MSG_AUTO_HOME _UxGT("오토홈")
|
|
#define MSG_AUTO_HOME_X _UxGT("X 홈으로")
|
|
#define MSG_AUTO_HOME_Y _UxGT("Y 홈으로")
|
|
#define MSG_AUTO_HOME_Z _UxGT("Z 홈으로")
|
|
#define MSG_LEVEL_BED_HOMING _UxGT("XYZ 홈으로")
|
|
#define MSG_LEVEL_BED_WAITING _UxGT("누르면 시작합니다")
|
|
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("다음 Point")
|
|
#define MSG_LEVEL_BED_DONE _UxGT("레벨링 완료!")
|
|
//#define MSG_Z_FADE_HEIGHT _UxGT("Fade Height")
|
|
//#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets")
|
|
//#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
|
|
//#define MSG_SET_ORIGIN _UxGT("Set origin")
|
|
#define MSG_PREHEAT_1 _UxGT("예열하기 - " PREHEAT_1_LABEL)
|
|
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
|
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 모두")
|
|
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" 노즐만")
|
|
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 베드만")
|
|
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
|
|
#define MSG_PREHEAT_2 _UxGT("예열하기 - " PREHEAT_2_LABEL)
|
|
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
|
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 모두")
|
|
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" 노즐만")
|
|
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 베드만")
|
|
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")
|
|
#define MSG_PREHEAT_CUSTOM _UxGT("Custom 예열")
|
|
#define MSG_COOLDOWN _UxGT("식히기")
|
|
#define MSG_SWITCH_PS_ON _UxGT("스위치 전원 켜기")
|
|
#define MSG_SWITCH_PS_OFF _UxGT("스위치 전원 끄기")
|
|
#define MSG_EXTRUDE _UxGT("밀어내기")
|
|
#define MSG_RETRACT _UxGT("당기기")
|
|
#define MSG_MOVE_AXIS _UxGT("축 이동")
|
|
#define MSG_BED_LEVELING _UxGT("베드 레벨링")
|
|
//#define MSG_LEVEL_BED _UxGT("Level bed")
|
|
//#define MSG_LEVEL_CORNERS _UxGT("Level corners")
|
|
//#define MSG_NEXT_CORNER _UxGT("Next corner")
|
|
//#define MSG_EDIT_MESH _UxGT("Edit Mesh")
|
|
//#define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped")
|
|
//#define MSG_USER_MENU _UxGT("Custom User Commands")
|
|
//#define MSG_IDEX_MENU _UxGT("IDEX Mode")
|
|
//#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park")
|
|
//#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplication")
|
|
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("미러 사본")
|
|
//#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Full control")
|
|
//#define MSG_X_OFFSET _UxGT("2nd nozzle X")
|
|
//#define MSG_Y_OFFSET _UxGT("2nd nozzle Y")
|
|
//#define MSG_Z_OFFSET _UxGT("2nd nozzle Z")
|
|
#define MSG_UBL_DOING_G29 _UxGT("오토레벨링 하기")
|
|
//#define MSG_UBL_UNHOMED _UxGT("Home XYZ first")
|
|
//#define MSG_UBL_TOOLS _UxGT("UBL Tools")
|
|
//#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
|
|
//#define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh")
|
|
//#define MSG_UBL_BC_INSERT _UxGT("Place shim & measure")
|
|
//#define MSG_UBL_BC_INSERT2 _UxGT("Measure")
|
|
//#define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed")
|
|
//#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next")
|
|
//#define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL")
|
|
//#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL")
|
|
//#define MSG_UBL_SET_TEMP_BED _UxGT("Bed Temp")
|
|
//#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
|
|
//#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend Temp")
|
|
//#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
|
|
//#define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit")
|
|
//#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh")
|
|
//#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh")
|
|
//#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
|
|
//#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
|
|
//#define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh")
|
|
//#define MSG_UBL_BUILD_MESH_M1 _UxGT("Build Mesh (" PREHEAT_1_LABEL ")")
|
|
//#define MSG_UBL_BUILD_MESH_M2 _UxGT("Build Mesh (" PREHEAT_2_LABEL ")")
|
|
//#define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh")
|
|
//#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height")
|
|
//#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
|
|
//#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh")
|
|
//#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Validate " PREHEAT_1_LABEL " Mesh")
|
|
//#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Validate Mesh (" PREHEAT_2_LABEL ")")
|
|
//#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
|
|
//#define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh")
|
|
//#define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling")
|
|
//#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling")
|
|
//#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Grid Mesh Leveling")
|
|
//#define MSG_UBL_MESH_LEVEL _UxGT("Level Mesh")
|
|
//#define MSG_UBL_SIDE_POINTS _UxGT("Side Points")
|
|
//#define MSG_UBL_MAP_TYPE _UxGT("Map Type")
|
|
//#define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map")
|
|
//#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host")
|
|
//#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV")
|
|
//#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup")
|
|
//#define MSG_UBL_INFO_UBL _UxGT("Output UBL Info")
|
|
//#define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount")
|
|
//#define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in")
|
|
//#define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in")
|
|
//#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh")
|
|
//#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All")
|
|
//#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest")
|
|
//#define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All")
|
|
//#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest")
|
|
//#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage")
|
|
//#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
|
|
//#define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh")
|
|
//#define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh")
|
|
//#define MSG_MESH_LOADED _UxGT("Mesh %i loaded")
|
|
//#define MSG_MESH_SAVED _UxGT("Mesh %i saved")
|
|
//#define MSG_UBL_NO_STORAGE _UxGT("No storage")
|
|
//#define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save")
|
|
//#define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore")
|
|
//#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped")
|
|
//#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL")
|
|
|
|
//#define MSG_LED_CONTROL _UxGT("LED Control")
|
|
//#define MSG_LEDS _UxGT("Lights")
|
|
//#define MSG_LED_PRESETS _UxGT("Light Presets")
|
|
//#define MSG_SET_LEDS_RED _UxGT("Red")
|
|
//#define MSG_SET_LEDS_ORANGE _UxGT("Orange")
|
|
//#define MSG_SET_LEDS_YELLOW _UxGT("Yellow")
|
|
//#define MSG_SET_LEDS_GREEN _UxGT("Green")
|
|
//#define MSG_SET_LEDS_BLUE _UxGT("Blue")
|
|
//#define MSG_SET_LEDS_INDIGO _UxGT("Indigo")
|
|
//#define MSG_SET_LEDS_VIOLET _UxGT("Violet")
|
|
//#define MSG_SET_LEDS_WHITE _UxGT("White")
|
|
//#define MSG_SET_LEDS_DEFAULT _UxGT("Default")
|
|
//#define MSG_CUSTOM_LEDS _UxGT("Custom Lights")
|
|
//#define MSG_INTENSITY_R _UxGT("Red Intensity")
|
|
//#define MSG_INTENSITY_G _UxGT("Green Intensity")
|
|
//#define MSG_INTENSITY_B _UxGT("Blue Intensity")
|
|
//#define MSG_INTENSITY_W _UxGT("White Intensity")
|
|
//#define MSG_LED_BRIGHTNESS _UxGT("Brightness")
|
|
|
|
//#define MSG_MOVING _UxGT("Moving...")
|
|
//#define MSG_FREE_XY _UxGT("Free XY")
|
|
//#define MSG_MOVE_X _UxGT("Move X")
|
|
//#define MSG_MOVE_Y _UxGT("Move Y")
|
|
//#define MSG_MOVE_Z _UxGT("Move Z")
|
|
//#define MSG_MOVE_E _UxGT("Extruder")
|
|
//#define MSG_MOVE_Z_DIST _UxGT("Move %smm")
|
|
//#define MSG_MOVE_01MM _UxGT("Move 0.1mm")
|
|
//#define MSG_MOVE_1MM _UxGT("Move 1mm")
|
|
//#define MSG_MOVE_10MM _UxGT("Move 10mm")
|
|
//#define MSG_SPEED _UxGT("Speed")
|
|
//#define MSG_BED_Z _UxGT("Bed Z")
|
|
#define MSG_NOZZLE _UxGT("노즐")
|
|
#define MSG_BED _UxGT("베드")
|
|
#define MSG_FAN_SPEED _UxGT("펜 속도")
|
|
#define MSG_EXTRA_FAN_SPEED _UxGT("엑스트라 펜 속도")
|
|
//#define MSG_FLOW _UxGT("Flow")
|
|
//#define MSG_CONTROL _UxGT("Control")
|
|
//#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
|
|
//#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
|
|
//#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
|
|
//#define MSG_AUTOTEMP _UxGT("Autotemp")
|
|
//#define MSG_LCD_ON _UxGT("On")
|
|
//#define MSG_LCD_OFF _UxGT("Off")
|
|
//#define MSG_PID_P _UxGT("PID-P")
|
|
//#define MSG_PID_I _UxGT("PID-I")
|
|
//#define MSG_PID_D _UxGT("PID-D")
|
|
//#define MSG_PID_C _UxGT("PID-C")
|
|
//#define MSG_SELECT _UxGT("Select")
|
|
//#define MSG_ACC _UxGT("Accel")
|
|
//#define MSG_JERK _UxGT("Jerk")
|
|
#if IS_KINEMATIC
|
|
//#define MSG_VA_JERK _UxGT("Va-jerk")
|
|
//#define MSG_VB_JERK _UxGT("Vb-jerk")
|
|
//#define MSG_VC_JERK _UxGT("Vc-jerk")
|
|
#else
|
|
//#define MSG_VA_JERK _UxGT("Vx-jerk")
|
|
//#define MSG_VB_JERK _UxGT("Vy-jerk")
|
|
//#define MSG_VC_JERK _UxGT("Vz-jerk")
|
|
#endif
|
|
//#define MSG_VE_JERK _UxGT("Ve-jerk")
|
|
//#define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev")
|
|
//#define MSG_VELOCITY _UxGT("Velocity")
|
|
//#define MSG_VMAX _UxGT("Vmax ")
|
|
//#define MSG_VMIN _UxGT("Vmin")
|
|
//#define MSG_VTRAV_MIN _UxGT("VTrav min")
|
|
//#define MSG_ACCELERATION _UxGT("Acceleration")
|
|
//#define MSG_AMAX _UxGT("Amax ")
|
|
//#define MSG_A_RETRACT _UxGT("A-retract")
|
|
//#define MSG_A_TRAVEL _UxGT("A-travel")
|
|
//#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
|
|
#if IS_KINEMATIC
|
|
//#define MSG_ASTEPS _UxGT("Asteps/mm")
|
|
//#define MSG_BSTEPS _UxGT("Bsteps/mm")
|
|
//#define MSG_CSTEPS _UxGT("Csteps/mm")
|
|
#else
|
|
//#define MSG_ASTEPS _UxGT("Xsteps/mm")
|
|
//#define MSG_BSTEPS _UxGT("Ysteps/mm")
|
|
//#define MSG_CSTEPS _UxGT("Zsteps/mm")
|
|
#endif
|
|
//#define MSG_ESTEPS _UxGT("Esteps/mm")
|
|
//#define MSG_E1STEPS _UxGT("E1steps/mm")
|
|
//#define MSG_E2STEPS _UxGT("E2steps/mm")
|
|
//#define MSG_E3STEPS _UxGT("E3steps/mm")
|
|
//#define MSG_E4STEPS _UxGT("E4steps/mm")
|
|
//#define MSG_E5STEPS _UxGT("E5steps/mm")
|
|
//#define MSG_E6STEPS _UxGT("E6steps/mm")
|
|
#define MSG_TEMPERATURE _UxGT("온도")
|
|
#define MSG_MOTION _UxGT("동작")
|
|
//#define MSG_FILAMENT _UxGT("Filament")
|
|
//#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
|
|
//#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
|
|
//#define MSG_FILAMENT_UNLOAD _UxGT("Unload mm")
|
|
//#define MSG_FILAMENT_LOAD _UxGT("Load mm")
|
|
//#define MSG_ADVANCE_K _UxGT("Advance K")
|
|
//#define MSG_CONTRAST _UxGT("LCD contrast")
|
|
#define MSG_STORE_EEPROM _UxGT("설정 저장하기")
|
|
#define MSG_LOAD_EEPROM _UxGT("설정 읽어오기")
|
|
#define MSG_RESTORE_FAILSAFE _UxGT("설정 되돌리기")
|
|
#define MSG_INIT_EEPROM _UxGT("EEPROM 초기화")
|
|
#define MSG_REFRESH _UxGT("새로고침")
|
|
#define MSG_WATCH _UxGT("처음으로")
|
|
#define MSG_PREPARE _UxGT("준비하기")
|
|
//#define MSG_TUNE _UxGT("Tune")
|
|
#define MSG_PAUSE_PRINT _UxGT("일시정지")
|
|
#define MSG_RESUME_PRINT _UxGT("재시작")
|
|
#define MSG_STOP_PRINT _UxGT("출력중지")
|
|
//#define MSG_OUTAGE_RECOVERY _UxGT("Outage Recovery")
|
|
#define MSG_MEDIA_MENU _UxGT("SD 카드출력")
|
|
#define MSG_NO_MEDIA _UxGT("SD 카드없음")
|
|
#define MSG_DWELL _UxGT("슬립모드...")
|
|
//#define MSG_USERWAIT _UxGT("Click to resume...")
|
|
#define MSG_PRINT_PAUSED _UxGT("일시 정지됨")
|
|
#define MSG_PRINTING _UxGT("출력중...")
|
|
#define MSG_PRINT_ABORTED _UxGT("취소됨")
|
|
//#define MSG_NO_MOVE _UxGT("No move.")
|
|
#define MSG_KILLED _UxGT("죽음. ")
|
|
#define MSG_STOPPED _UxGT("멈춤. ")
|
|
//#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
|
|
//#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")
|
|
//#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
|
|
//#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm")
|
|
//#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
|
|
//#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")
|
|
//#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
|
|
//#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
|
|
//#define MSG_AUTORETRACT _UxGT("AutoRetr.")
|
|
//#define MSG_FILAMENTCHANGE _UxGT("Change filament")
|
|
//#define MSG_FILAMENTLOAD _UxGT("Load filament")
|
|
//#define MSG_FILAMENTUNLOAD _UxGT("Unload filament")
|
|
//#define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All")
|
|
//#define MSG_INIT_MEDIA _UxGT("Init. SD card")
|
|
//#define MSG_CHANGE_MEDIA _UxGT("Change SD card")
|
|
//#define MSG_ZPROBE_OUT _UxGT("Z Probe past bed")
|
|
//#define MSG_SKEW_FACTOR _UxGT("Skew Factor")
|
|
//#define MSG_BLTOUCH _UxGT("BLTouch")
|
|
//#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
|
|
//#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
|
|
//#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
|
|
//#define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch")
|
|
//#define MSG_MANUAL_DEPLOY _UxGT("Deploy Z-Probe")
|
|
//#define MSG_MANUAL_STOW _UxGT("Stow Z-Probe")
|
|
//#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
//#define MSG_FIRST _UxGT("first")
|
|
//#define MSG_ZPROBE_ZOFFSET _UxGT("Probe Z Offset")
|
|
//#define MSG_BABYSTEP_X _UxGT("Babystep X")
|
|
//#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
|
|
//#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
|
|
//#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
|
|
//#define MSG_HEATING_FAILED_LCD _UxGT("Heating failed")
|
|
//#define MSG_HEATING_FAILED_LCD_BED _UxGT("Bed heating failed")
|
|
//#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
|
|
//#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
|
|
//#define MSG_THERMAL_RUNAWAY_BED _UxGT("BED THERMAL RUNAWAY")
|
|
//#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
|
|
//#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
|
|
//#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
|
|
//#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
|
|
//#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
|
|
//#define MSG_HALTED _UxGT("PRINTER HALTED")
|
|
//#define MSG_PLEASE_RESET _UxGT("Please reset")
|
|
//#define MSG_SHORT_DAY _UxGT("d") // One character only
|
|
//#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
|
//#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
|
//#define MSG_HEATING _UxGT("Heating...")
|
|
//#define MSG_COOLING _UxGT("Cooling...")
|
|
//#define MSG_BED_HEATING _UxGT("Bed heating...")
|
|
//#define MSG_BED_COOLING _UxGT("Bed cooling...")
|
|
//#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration")
|
|
//#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X")
|
|
//#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y")
|
|
//#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z")
|
|
//#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
|
|
//#define MSG_DELTA_SETTINGS _UxGT("Delta Settings")
|
|
//#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration")
|
|
//#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
|
|
//#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Probe Z-offset")
|
|
//#define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod")
|
|
//#define MSG_DELTA_HEIGHT _UxGT("Height")
|
|
//#define MSG_DELTA_RADIUS _UxGT("Radius")
|
|
//#define MSG_INFO_MENU _UxGT("About Printer")
|
|
//#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
|
|
//#define MSG_3POINT_LEVELING _UxGT("3-Point Leveling")
|
|
//#define MSG_LINEAR_LEVELING _UxGT("Linear Leveling")
|
|
//#define MSG_BILINEAR_LEVELING _UxGT("Bilinear Leveling")
|
|
//#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling")
|
|
//#define MSG_MESH_LEVELING _UxGT("Mesh Leveling")
|
|
//#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
|
|
//#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
|
|
//#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
|
|
//#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
|
|
//#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
|
//#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
|
//#define MSG_CASE_LIGHT _UxGT("Case light")
|
|
//#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light Brightness")
|
|
|
|
#define MSG_EXPECTED_PRINTER _UxGT("잘못된 프린터")
|
|
|
|
#if LCD_WIDTH >= 20
|
|
//#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
|
|
//#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
|
|
//#define MSG_INFO_PRINT_TIME _UxGT("Total print time")
|
|
//#define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time")
|
|
//#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total")
|
|
#else
|
|
//#define MSG_INFO_PRINT_COUNT _UxGT("Prints")
|
|
//#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
|
|
//#define MSG_INFO_PRINT_TIME _UxGT("Total")
|
|
//#define MSG_INFO_PRINT_LONGEST _UxGT("Longest")
|
|
//#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded")
|
|
#endif
|
|
//#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
|
//#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
|
//#define MSG_INFO_PSU _UxGT("PSU")
|
|
//#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
|
|
//#define MSG_DAC_PERCENT _UxGT("Driver %")
|
|
//#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
|
|
//#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PRINT PAUSED")
|
|
//#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("LOAD FILAMENT")
|
|
//#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("UNLOAD FILAMENT")
|
|
//#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
|
//#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purge more")
|
|
//#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continue")
|
|
//#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
|
|
//#define MSG_RUNOUT_SENSOR _UxGT("Runout Sensor")
|
|
//#define MSG_ERR_HOMING_FAILED _UxGT("Homing failed")
|
|
//#define MSG_ERR_PROBING_FAILED _UxGT("Probing failed")
|
|
//#define MSG_M600_TOO_COLD _UxGT("M600: Too cold")
|
|
|
|
//
|
|
// Filament Change screens show up to 3 lines on a 4-line display
|
|
// ...or up to 2 lines on a 3-line display
|
|
//
|
|
#if LCD_HEIGHT >= 4
|
|
//#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
|
|
//#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
|
|
//#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
|
|
//#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
|
|
//#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
|
|
//#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
|
|
//#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
|
|
//#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
|
|
//#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to")
|
|
//#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.")
|
|
//#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle")
|
|
//#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...")
|
|
//#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
|
|
//#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
|
|
//#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for")
|
|
//#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge")
|
|
//#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
|
|
//#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
|
|
#else // LCD_HEIGHT < 4
|
|
//#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
|
|
//#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
|
|
//#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
|
|
//#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Click to heat")
|
|
//#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...")
|
|
//#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
|
|
//#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...")
|
|
//#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
|
|
#endif // LCD_HEIGHT < 4
|