Erik van der Zalm 63aec3c56e Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. ...

Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp

2012-03-25 14:36:51 +02:00

..

Gen7

Fix cast warning in Gen7

2012-02-23 18:50:05 +01:00

hardware/tools/avr/etc

ATMega1284P support for Arduino IDE

2012-02-17 11:41:47 +01:00

Sanguino

Fixed compiler warning for Sanguino compile

2012-02-26 17:35:01 +01:00

.gitignore

Add suitable .gitignore to avoid build noise

2012-02-26 18:26:56 -05:00

cardreader.cpp

made prepare->autostart independent of current folder.

2012-03-19 20:24:40 +01:00

cardreader.h

found error in filenames.

2012-03-19 20:06:58 +01:00

Configuration_adv.h

found error in filenames.

2012-03-19 20:06:58 +01:00

Configuration.h

Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.

2012-03-25 14:36:51 +02:00

COPYING

first commit

2011-08-12 22:28:35 +02:00

create_speed_lookuptable.py

Added 20MHz support.

2012-03-11 12:25:04 +01:00

createTemperatureLookup.py

first commit

2011-08-12 22:28:35 +02:00

EEPROMwrite.h

Added E-Jerk

2012-03-04 16:34:58 +01:00

fastio.h

Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1

2012-02-13 13:07:55 +01:00

language.h

Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.

2012-03-25 14:36:51 +02:00

Makefile

Makefile: Redone

2012-03-22 13:48:10 +00:00

Marlin.h

Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.

2012-03-25 14:36:51 +02:00

Marlin.pde

Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.

2012-03-25 14:36:51 +02:00

MarlinSerial.cpp

Teensylu support.

2012-02-09 19:27:45 +01:00

MarlinSerial.h

Teensylu support.

2012-02-09 19:27:45 +01:00

motion_control.cpp

Fixed homing

2012-02-27 18:31:40 +01:00

motion_control.h

Removed interrupt nesting in the stepper ISR.

2011-11-27 21:12:55 +01:00

pins.h

New board variant, Open Motion Controller

2012-03-22 13:51:21 +00:00

planner.cpp

Added FAN_PIN -1 checks

2012-03-08 22:09:49 +01:00

planner.h

Added E-Jerk

2012-03-04 16:34:58 +01:00

Sd2Card.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2Card.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2PinMap.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdBaseFile.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdBaseFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFatConfig.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFatStructs.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFatUtil.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdFatUtil.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdInfo.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

speed_lookuptable.h

Added 20MHz support.

2012-03-11 12:25:04 +01:00

stepper.cpp

Added 20MHz support.

2012-03-11 12:25:04 +01:00

stepper.h

merging

2011-12-12 20:35:46 +01:00

temperature.cpp

Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.

2012-03-25 14:36:51 +02:00

temperature.h

Corrected active_extruder when autotemp is used.

2012-03-08 22:04:13 +01:00

thermistortables.h

simplified the includes, makefile now works with arduino23

2011-12-22 14:55:45 +01:00

ultralcd.h

Fixed general 16x2 LCD build without SD support.

2012-02-29 15:33:23 +01:00

ultralcd.pde

Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.

2012-03-24 02:26:59 +08:00

watchdog.h

header file simplification

2011-12-22 12:38:50 +01:00

watchdog.pde

simplified the includes, makefile now works with arduino23

2011-12-22 14:55:45 +01:00

wiring.h

add wiring.h, that can be used to overwrite:

2011-12-22 14:57:28 +01:00