Firmware2/Marlin/example_configurations/K8200
Bob-the-Kuhn 6643d553f6 # This is a combination of 2 commits.
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
2017-04-06 16:16:27 -05:00
..
Configuration_adv.h # This is a combination of 2 commits. 2017-04-06 16:16:27 -05:00
Configuration.h Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
README.md K8200: Example configuration back in sync 2016-11-18 22:55:02 +01:00

Example Configuration for Vellemann K8200

  • Configuration files for Vellemann K8200 (with VM8201 - LCD Option for K8200)

  • K8200 is a 3Drag clone - configuration should work with 3Drag http://reprap.org/wiki/3drag, too. Please report.

  • updated manually with parameters from genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch

  • VM8201 uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"

  • german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support

I @CONSULitAS tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well.

Source for genuine Vellemann Firmware