daid303 6731c094ee Fix compiling with just an 16x2 LCD and no buttons.

2012-12-12 11:32:33 +01:00

..

cardreader.cpp

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

cardreader.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

Configuration_adv.h

Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.

2012-12-11 01:54:40 -08:00

Configuration.h

Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.

2012-12-12 09:08:37 +01:00

ConfigurationStore.cpp

Fixed #317

2012-11-24 17:32:30 +01:00

ConfigurationStore.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

COPYING

first commit

2011-08-12 22:28:35 +02:00

create_speed_lookuptable.py

Added 20MHz support.

2012-03-11 12:25:04 +01:00

createTemperatureLookupMarlin.py

Added new temperature lookup table creation tool. This one uses stein hart-hart equations.

2012-11-16 23:51:05 +01:00

fastio.h

Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.

2012-12-08 15:16:38 -08:00

language.h

Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)

2012-12-11 14:53:53 +01:00

LCD Menu Tree.pdf

Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.

2012-08-29 21:08:41 +01:00

LiquidCrystalRus.cpp

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

LiquidCrystalRus.h

Enables support the Cyrillic alphabet for LCD

2012-10-12 19:06:43 +04:00

Makefile

Update on makefile for moved Arduino addons.

2012-12-10 12:06:30 +01:00

Marlin_main.cpp

Fix compiling with just an 16x2 LCD and no buttons.

2012-12-12 11:32:33 +01:00

Marlin.h

AT90USB is only defined after pins.h is included.

2012-12-09 01:40:33 -08:00

Marlin.pde

Mistake there, not sure why I did that. My bad.

2012-12-05 20:23:13 +01:00

MarlinSerial.cpp

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

MarlinSerial.h

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

Menu Plans.xlsx

Tidy up

2012-08-29 22:53:41 +01:00

motion_control.cpp

software_endstops: use *_MIN_POS and *_MAX_POS for arcs

2012-08-10 19:36:30 +01:00

motion_control.h

Removed interrupt nesting in the stepper ISR.

2011-11-27 21:12:55 +01:00

pins.h

Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)

2012-12-11 14:53:53 +01:00

planner.cpp

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

planner.h

Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.

2012-05-09 08:05:13 +03:00

Sd2Card.cpp

Fix for a few -Wextra warnings.

2012-11-12 15:35:28 +01:00

Sd2Card.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2PinMap.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdBaseFile.cpp

Few simple fixes that save RAM, as static strings are stored in RAM by default.

2012-11-28 10:30:34 +01:00

SdBaseFile.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatConfig.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatStructs.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatUtil.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdFatUtil.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.cpp

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

SdFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdInfo.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

speed_lookuptable.h

Made the 2nd speed lookup table condition more explicit.

2012-11-11 12:02:48 +01:00

stepper.cpp

Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1

2012-12-09 23:46:42 +01:00

stepper.h

Few simple fixes that save RAM, as static strings are stored in RAM by default.

2012-11-28 10:30:34 +01:00

temperature.cpp

Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.

2012-12-12 09:08:37 +01:00

temperature.h

Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

2012-12-09 23:00:06 +01:00

thermistortables.h

Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

2012-12-09 23:00:06 +01:00

ultralcd.cpp

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

ultralcd.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

watchdog.cpp

Fix compiling the watchdog error message when the manual reset watchdog is used.

2012-12-06 10:27:50 +01:00

watchdog.h

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

wiring.h

add wiring.h, that can be used to overwrite:

2011-12-22 14:57:28 +01:00