Firmware2/Marlin/src/pins/pins_RADDS.h
2018-07-01 23:11:42 -05:00

241 lines
5.4 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* RADDS
*/
#ifndef __SAM3X8E__
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "RADDS"
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 6
#define SERVO2_PIN 39
#define SERVO3_PIN 40
//
// Limit Switches
//
#define X_MIN_PIN 28
#define X_MAX_PIN 34
#define Y_MIN_PIN 30
#define Y_MAX_PIN 36
#define Z_MIN_PIN 32
#define Z_MAX_PIN 38
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 38
#endif
//
// Steppers
//
#define X_STEP_PIN 24
#define X_DIR_PIN 23
#define X_ENABLE_PIN 26
#ifndef X_CS_PIN
#define X_CS_PIN 25
#endif
#define Y_STEP_PIN 17
#define Y_DIR_PIN 16
#define Y_ENABLE_PIN 22
#ifndef Y_CS_PIN
#define Y_CS_PIN 27
#endif
#define Z_STEP_PIN 2
#define Z_DIR_PIN 3
#define Z_ENABLE_PIN 15
#ifndef Z_CS_PIN
#define Z_CS_PIN 29
#endif
#define E0_STEP_PIN 61
#define E0_DIR_PIN 60
#define E0_ENABLE_PIN 62
#ifndef E0_CS_PIN
#define E0_CS_PIN 31
#endif
#define E1_STEP_PIN 64
#define E1_DIR_PIN 63
#define E1_ENABLE_PIN 65
#ifndef E1_CS_PIN
#define E1_CS_PIN 33
#endif
#define E2_STEP_PIN 51
#define E2_DIR_PIN 53
#define E2_ENABLE_PIN 49
#ifndef E2_CS_PIN
#define E2_CS_PIN 35
#endif
//
// Extension Board V2
// http://doku.radds.org/dokumentation/extension-board
//
//#define RADDS_EXTENSION
#if ENABLED(RADDS_EXTENSION)
#define E3_STEP_PIN 35
#define E3_DIR_PIN 33
#define E3_ENABLE_PIN 37
#ifndef E3_CS_PIN
#define E3_CS_PIN 6
#endif
#define E3_MS1_PIN 67
#define E3_MS2_PIN 68
#define E3_MS3_PIN 69
#define Z2_STEP_PIN 29
#define Z2_DIR_PIN 27
#define Z2_ENABLE_PIN 31
#ifndef Z2_CS_PIN
#define Z2_CS_PIN 39
#endif
#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
#define RADDS_EXT_VDD1_PIN 25
#define RADDS_EXT_VDD2_PIN 66
#define BOARD_INIT() OUT_WRITE(RADDS_EXT_VDD1_PIN, HIGH); OUT_WRITE(RADDS_EXT_VDD2_PIN, HIGH)
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 // Analog Input
#define TEMP_2_PIN 2 // Analog Input
#define TEMP_3_PIN 3 // Analog Input
#define TEMP_4_PIN 5 // dummy so will compile when PINS_DEBUGGING is enabled
#define TEMP_BED_PIN 4 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53
#else
#define MAX6675_SS 49
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
#define FAN1_PIN 8
//
// Misc. Functions
//
#define SDSS 4
#define PS_ON_PIN 40 // SERVO3_PIN
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 39 // SERVO2_PIN
#endif
// I2C EEPROM with 8K of space
#define I2C_EEPROM
#define E2END 0x1FFF
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#if ENABLED(RADDS_DISPLAY)
#define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43
#define LCD_PINS_D4 44
#define LCD_PINS_D5 45
#define LCD_PINS_D6 46
#define LCD_PINS_D7 47
#define BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BTN_BACK 71
#undef SDSS
#define SDSS 10
#define SD_DETECT_PIN 14
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 46
#define LCD_PINS_ENABLE 47
#define LCD_PINS_D4 44
#define BEEPER_PIN 41
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 50
#define BTN_EN2 52
#define BTN_ENC 48
#define BEEPER_PIN 41
#define LCD_SDSS 10
#define SD_DETECT_PIN 14
#elif ENABLED(SPARK_FULL_GRAPHICS)
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD