Firmware2/Marlin/thermistortables.h
2014-04-13 18:00:55 +02:00

1083 lines
35 KiB
C

#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_
#include "Marlin.h"
#define OVERSAMPLENR 16
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORBED == 1) //100k bed thermistor
const short temptable_1[][2] PROGMEM = {
{ 23*OVERSAMPLENR , 300 },
{ 25*OVERSAMPLENR , 295 },
{ 27*OVERSAMPLENR , 290 },
{ 28*OVERSAMPLENR , 285 },
{ 31*OVERSAMPLENR , 280 },
{ 33*OVERSAMPLENR , 275 },
{ 35*OVERSAMPLENR , 270 },
{ 38*OVERSAMPLENR , 265 },
{ 41*OVERSAMPLENR , 260 },
{ 44*OVERSAMPLENR , 255 },
{ 48*OVERSAMPLENR , 250 },
{ 52*OVERSAMPLENR , 245 },
{ 56*OVERSAMPLENR , 240 },
{ 61*OVERSAMPLENR , 235 },
{ 66*OVERSAMPLENR , 230 },
{ 71*OVERSAMPLENR , 225 },
{ 78*OVERSAMPLENR , 220 },
{ 84*OVERSAMPLENR , 215 },
{ 92*OVERSAMPLENR , 210 },
{ 100*OVERSAMPLENR , 205 },
{ 109*OVERSAMPLENR , 200 },
{ 120*OVERSAMPLENR , 195 },
{ 131*OVERSAMPLENR , 190 },
{ 143*OVERSAMPLENR , 185 },
{ 156*OVERSAMPLENR , 180 },
{ 171*OVERSAMPLENR , 175 },
{ 187*OVERSAMPLENR , 170 },
{ 205*OVERSAMPLENR , 165 },
{ 224*OVERSAMPLENR , 160 },
{ 245*OVERSAMPLENR , 155 },
{ 268*OVERSAMPLENR , 150 },
{ 293*OVERSAMPLENR , 145 },
{ 320*OVERSAMPLENR , 140 },
{ 348*OVERSAMPLENR , 135 },
{ 379*OVERSAMPLENR , 130 },
{ 411*OVERSAMPLENR , 125 },
{ 445*OVERSAMPLENR , 120 },
{ 480*OVERSAMPLENR , 115 },
{ 516*OVERSAMPLENR , 110 },
{ 553*OVERSAMPLENR , 105 },
{ 591*OVERSAMPLENR , 100 },
{ 628*OVERSAMPLENR , 95 },
{ 665*OVERSAMPLENR , 90 },
{ 702*OVERSAMPLENR , 85 },
{ 737*OVERSAMPLENR , 80 },
{ 770*OVERSAMPLENR , 75 },
{ 801*OVERSAMPLENR , 70 },
{ 830*OVERSAMPLENR , 65 },
{ 857*OVERSAMPLENR , 60 },
{ 881*OVERSAMPLENR , 55 },
{ 903*OVERSAMPLENR , 50 },
{ 922*OVERSAMPLENR , 45 },
{ 939*OVERSAMPLENR , 40 },
{ 954*OVERSAMPLENR , 35 },
{ 966*OVERSAMPLENR , 30 },
{ 977*OVERSAMPLENR , 25 },
{ 985*OVERSAMPLENR , 20 },
{ 993*OVERSAMPLENR , 15 },
{ 999*OVERSAMPLENR , 10 },
{ 1004*OVERSAMPLENR , 5 },
{ 1008*OVERSAMPLENR , 0 } //safety
};
#endif
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor
const short temptable_2[][2] PROGMEM = {
//200k ATC Semitec 204GT-2
//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
{1*OVERSAMPLENR, 848},
{30*OVERSAMPLENR, 300}, //top rating 300C
{34*OVERSAMPLENR, 290},
{39*OVERSAMPLENR, 280},
{46*OVERSAMPLENR, 270},
{53*OVERSAMPLENR, 260},
{63*OVERSAMPLENR, 250},
{74*OVERSAMPLENR, 240},
{87*OVERSAMPLENR, 230},
{104*OVERSAMPLENR, 220},
{124*OVERSAMPLENR, 210},
{148*OVERSAMPLENR, 200},
{176*OVERSAMPLENR, 190},
{211*OVERSAMPLENR, 180},
{252*OVERSAMPLENR, 170},
{301*OVERSAMPLENR, 160},
{357*OVERSAMPLENR, 150},
{420*OVERSAMPLENR, 140},
{489*OVERSAMPLENR, 130},
{562*OVERSAMPLENR, 120},
{636*OVERSAMPLENR, 110},
{708*OVERSAMPLENR, 100},
{775*OVERSAMPLENR, 90},
{835*OVERSAMPLENR, 80},
{884*OVERSAMPLENR, 70},
{924*OVERSAMPLENR, 60},
{955*OVERSAMPLENR, 50},
{977*OVERSAMPLENR, 40},
{993*OVERSAMPLENR, 30},
{1004*OVERSAMPLENR, 20},
{1012*OVERSAMPLENR, 10},
{1016*OVERSAMPLENR, 0},
};
#endif
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORBED == 3) //mendel-parts
const short temptable_3[][2] PROGMEM = {
{1*OVERSAMPLENR,864},
{21*OVERSAMPLENR,300},
{25*OVERSAMPLENR,290},
{29*OVERSAMPLENR,280},
{33*OVERSAMPLENR,270},
{39*OVERSAMPLENR,260},
{46*OVERSAMPLENR,250},
{54*OVERSAMPLENR,240},
{64*OVERSAMPLENR,230},
{75*OVERSAMPLENR,220},
{90*OVERSAMPLENR,210},
{107*OVERSAMPLENR,200},
{128*OVERSAMPLENR,190},
{154*OVERSAMPLENR,180},
{184*OVERSAMPLENR,170},
{221*OVERSAMPLENR,160},
{265*OVERSAMPLENR,150},
{316*OVERSAMPLENR,140},
{375*OVERSAMPLENR,130},
{441*OVERSAMPLENR,120},
{513*OVERSAMPLENR,110},
{588*OVERSAMPLENR,100},
{734*OVERSAMPLENR,80},
{856*OVERSAMPLENR,60},
{938*OVERSAMPLENR,40},
{986*OVERSAMPLENR,20},
{1008*OVERSAMPLENR,0},
{1018*OVERSAMPLENR,-20}
};
#endif
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORBED == 4) //10k thermistor
const short temptable_4[][2] PROGMEM = {
{1*OVERSAMPLENR, 430},
{54*OVERSAMPLENR, 137},
{107*OVERSAMPLENR, 107},
{160*OVERSAMPLENR, 91},
{213*OVERSAMPLENR, 80},
{266*OVERSAMPLENR, 71},
{319*OVERSAMPLENR, 64},
{372*OVERSAMPLENR, 57},
{425*OVERSAMPLENR, 51},
{478*OVERSAMPLENR, 46},
{531*OVERSAMPLENR, 41},
{584*OVERSAMPLENR, 35},
{637*OVERSAMPLENR, 30},
{690*OVERSAMPLENR, 25},
{743*OVERSAMPLENR, 20},
{796*OVERSAMPLENR, 14},
{849*OVERSAMPLENR, 7},
{902*OVERSAMPLENR, 0},
{955*OVERSAMPLENR, -11},
{1008*OVERSAMPLENR, -35}
};
#endif
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
const short temptable_5[][2] PROGMEM = {
// ATC Semitec 104GT-2 (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
{1*OVERSAMPLENR, 713},
{17*OVERSAMPLENR, 300}, //top rating 300C
{20*OVERSAMPLENR, 290},
{23*OVERSAMPLENR, 280},
{27*OVERSAMPLENR, 270},
{31*OVERSAMPLENR, 260},
{37*OVERSAMPLENR, 250},
{43*OVERSAMPLENR, 240},
{51*OVERSAMPLENR, 230},
{61*OVERSAMPLENR, 220},
{73*OVERSAMPLENR, 210},
{87*OVERSAMPLENR, 200},
{106*OVERSAMPLENR, 190},
{128*OVERSAMPLENR, 180},
{155*OVERSAMPLENR, 170},
{189*OVERSAMPLENR, 160},
{230*OVERSAMPLENR, 150},
{278*OVERSAMPLENR, 140},
{336*OVERSAMPLENR, 130},
{402*OVERSAMPLENR, 120},
{476*OVERSAMPLENR, 110},
{554*OVERSAMPLENR, 100},
{635*OVERSAMPLENR, 90},
{713*OVERSAMPLENR, 80},
{784*OVERSAMPLENR, 70},
{846*OVERSAMPLENR, 60},
{897*OVERSAMPLENR, 50},
{937*OVERSAMPLENR, 40},
{966*OVERSAMPLENR, 30},
{986*OVERSAMPLENR, 20},
{1000*OVERSAMPLENR, 10},
{1010*OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
const short temptable_6[][2] PROGMEM = {
{1*OVERSAMPLENR, 350},
{28*OVERSAMPLENR, 250}, //top rating 250C
{31*OVERSAMPLENR, 245},
{35*OVERSAMPLENR, 240},
{39*OVERSAMPLENR, 235},
{42*OVERSAMPLENR, 230},
{44*OVERSAMPLENR, 225},
{49*OVERSAMPLENR, 220},
{53*OVERSAMPLENR, 215},
{62*OVERSAMPLENR, 210},
{71*OVERSAMPLENR, 205}, //fitted graphically
{78*OVERSAMPLENR, 200}, //fitted graphically
{94*OVERSAMPLENR, 190},
{102*OVERSAMPLENR, 185},
{116*OVERSAMPLENR, 170},
{143*OVERSAMPLENR, 160},
{183*OVERSAMPLENR, 150},
{223*OVERSAMPLENR, 140},
{270*OVERSAMPLENR, 130},
{318*OVERSAMPLENR, 120},
{383*OVERSAMPLENR, 110},
{413*OVERSAMPLENR, 105},
{439*OVERSAMPLENR, 100},
{484*OVERSAMPLENR, 95},
{513*OVERSAMPLENR, 90},
{607*OVERSAMPLENR, 80},
{664*OVERSAMPLENR, 70},
{781*OVERSAMPLENR, 60},
{810*OVERSAMPLENR, 55},
{849*OVERSAMPLENR, 50},
{914*OVERSAMPLENR, 45},
{914*OVERSAMPLENR, 40},
{935*OVERSAMPLENR, 35},
{954*OVERSAMPLENR, 30},
{970*OVERSAMPLENR, 25},
{978*OVERSAMPLENR, 22},
{1008*OVERSAMPLENR, 3},
{1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C
};
#endif
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
const short temptable_7[][2] PROGMEM = {
{1*OVERSAMPLENR, 941},
{19*OVERSAMPLENR, 362},
{37*OVERSAMPLENR, 299}, //top rating 300C
{55*OVERSAMPLENR, 266},
{73*OVERSAMPLENR, 245},
{91*OVERSAMPLENR, 229},
{109*OVERSAMPLENR, 216},
{127*OVERSAMPLENR, 206},
{145*OVERSAMPLENR, 197},
{163*OVERSAMPLENR, 190},
{181*OVERSAMPLENR, 183},
{199*OVERSAMPLENR, 177},
{217*OVERSAMPLENR, 171},
{235*OVERSAMPLENR, 166},
{253*OVERSAMPLENR, 162},
{271*OVERSAMPLENR, 157},
{289*OVERSAMPLENR, 153},
{307*OVERSAMPLENR, 149},
{325*OVERSAMPLENR, 146},
{343*OVERSAMPLENR, 142},
{361*OVERSAMPLENR, 139},
{379*OVERSAMPLENR, 135},
{397*OVERSAMPLENR, 132},
{415*OVERSAMPLENR, 129},
{433*OVERSAMPLENR, 126},
{451*OVERSAMPLENR, 123},
{469*OVERSAMPLENR, 121},
{487*OVERSAMPLENR, 118},
{505*OVERSAMPLENR, 115},
{523*OVERSAMPLENR, 112},
{541*OVERSAMPLENR, 110},
{559*OVERSAMPLENR, 107},
{577*OVERSAMPLENR, 105},
{595*OVERSAMPLENR, 102},
{613*OVERSAMPLENR, 99},
{631*OVERSAMPLENR, 97},
{649*OVERSAMPLENR, 94},
{667*OVERSAMPLENR, 92},
{685*OVERSAMPLENR, 89},
{703*OVERSAMPLENR, 86},
{721*OVERSAMPLENR, 84},
{739*OVERSAMPLENR, 81},
{757*OVERSAMPLENR, 78},
{775*OVERSAMPLENR, 75},
{793*OVERSAMPLENR, 72},
{811*OVERSAMPLENR, 69},
{829*OVERSAMPLENR, 66},
{847*OVERSAMPLENR, 62},
{865*OVERSAMPLENR, 59},
{883*OVERSAMPLENR, 55},
{901*OVERSAMPLENR, 51},
{919*OVERSAMPLENR, 46},
{937*OVERSAMPLENR, 41},
{955*OVERSAMPLENR, 35},
{973*OVERSAMPLENR, 27},
{991*OVERSAMPLENR, 17},
{1009*OVERSAMPLENR, 1},
{1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C
};
#endif
#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
// R0 = 100000 Ohm
// T0 = 25 °C
// Beta = 3974
// R1 = 0 Ohm
// R2 = 4700 Ohm
const short temptable_71[][2] PROGMEM = {
{35*OVERSAMPLENR, 300},
{51*OVERSAMPLENR, 270},
{54*OVERSAMPLENR, 265},
{58*OVERSAMPLENR, 260},
{59*OVERSAMPLENR, 258},
{61*OVERSAMPLENR, 256},
{63*OVERSAMPLENR, 254},
{64*OVERSAMPLENR, 252},
{66*OVERSAMPLENR, 250},
{67*OVERSAMPLENR, 249},
{68*OVERSAMPLENR, 248},
{69*OVERSAMPLENR, 247},
{70*OVERSAMPLENR, 246},
{71*OVERSAMPLENR, 245},
{72*OVERSAMPLENR, 244},
{73*OVERSAMPLENR, 243},
{74*OVERSAMPLENR, 242},
{75*OVERSAMPLENR, 241},
{76*OVERSAMPLENR, 240},
{77*OVERSAMPLENR, 239},
{78*OVERSAMPLENR, 238},
{79*OVERSAMPLENR, 237},
{80*OVERSAMPLENR, 236},
{81*OVERSAMPLENR, 235},
{82*OVERSAMPLENR, 234},
{84*OVERSAMPLENR, 233},
{85*OVERSAMPLENR, 232},
{86*OVERSAMPLENR, 231},
{87*OVERSAMPLENR, 230},
{89*OVERSAMPLENR, 229},
{90*OVERSAMPLENR, 228},
{91*OVERSAMPLENR, 227},
{92*OVERSAMPLENR, 226},
{94*OVERSAMPLENR, 225},
{95*OVERSAMPLENR, 224},
{97*OVERSAMPLENR, 223},
{98*OVERSAMPLENR, 222},
{99*OVERSAMPLENR, 221},
{101*OVERSAMPLENR, 220},
{102*OVERSAMPLENR, 219},
{104*OVERSAMPLENR, 218},
{106*OVERSAMPLENR, 217},
{107*OVERSAMPLENR, 216},
{109*OVERSAMPLENR, 215},
{110*OVERSAMPLENR, 214},
{112*OVERSAMPLENR, 213},
{114*OVERSAMPLENR, 212},
{115*OVERSAMPLENR, 211},
{117*OVERSAMPLENR, 210},
{119*OVERSAMPLENR, 209},
{121*OVERSAMPLENR, 208},
{123*OVERSAMPLENR, 207},
{125*OVERSAMPLENR, 206},
{126*OVERSAMPLENR, 205},
{128*OVERSAMPLENR, 204},
{130*OVERSAMPLENR, 203},
{132*OVERSAMPLENR, 202},
{134*OVERSAMPLENR, 201},
{136*OVERSAMPLENR, 200},
{139*OVERSAMPLENR, 199},
{141*OVERSAMPLENR, 198},
{143*OVERSAMPLENR, 197},
{145*OVERSAMPLENR, 196},
{147*OVERSAMPLENR, 195},
{150*OVERSAMPLENR, 194},
{152*OVERSAMPLENR, 193},
{154*OVERSAMPLENR, 192},
{157*OVERSAMPLENR, 191},
{159*OVERSAMPLENR, 190},
{162*OVERSAMPLENR, 189},
{164*OVERSAMPLENR, 188},
{167*OVERSAMPLENR, 187},
{170*OVERSAMPLENR, 186},
{172*OVERSAMPLENR, 185},
{175*OVERSAMPLENR, 184},
{178*OVERSAMPLENR, 183},
{181*OVERSAMPLENR, 182},
{184*OVERSAMPLENR, 181},
{187*OVERSAMPLENR, 180},
{190*OVERSAMPLENR, 179},
{193*OVERSAMPLENR, 178},
{196*OVERSAMPLENR, 177},
{199*OVERSAMPLENR, 176},
{202*OVERSAMPLENR, 175},
{205*OVERSAMPLENR, 174},
{208*OVERSAMPLENR, 173},
{212*OVERSAMPLENR, 172},
{215*OVERSAMPLENR, 171},
{219*OVERSAMPLENR, 170},
{237*OVERSAMPLENR, 165},
{256*OVERSAMPLENR, 160},
{300*OVERSAMPLENR, 150},
{351*OVERSAMPLENR, 140},
{470*OVERSAMPLENR, 120},
{504*OVERSAMPLENR, 115},
{538*OVERSAMPLENR, 110},
{552*OVERSAMPLENR, 108},
{566*OVERSAMPLENR, 106},
{580*OVERSAMPLENR, 104},
{594*OVERSAMPLENR, 102},
{608*OVERSAMPLENR, 100},
{622*OVERSAMPLENR, 98},
{636*OVERSAMPLENR, 96},
{650*OVERSAMPLENR, 94},
{664*OVERSAMPLENR, 92},
{678*OVERSAMPLENR, 90},
{712*OVERSAMPLENR, 85},
{745*OVERSAMPLENR, 80},
{758*OVERSAMPLENR, 78},
{770*OVERSAMPLENR, 76},
{783*OVERSAMPLENR, 74},
{795*OVERSAMPLENR, 72},
{806*OVERSAMPLENR, 70},
{818*OVERSAMPLENR, 68},
{829*OVERSAMPLENR, 66},
{840*OVERSAMPLENR, 64},
{850*OVERSAMPLENR, 62},
{860*OVERSAMPLENR, 60},
{870*OVERSAMPLENR, 58},
{879*OVERSAMPLENR, 56},
{888*OVERSAMPLENR, 54},
{897*OVERSAMPLENR, 52},
{905*OVERSAMPLENR, 50},
{924*OVERSAMPLENR, 45},
{940*OVERSAMPLENR, 40},
{955*OVERSAMPLENR, 35},
{967*OVERSAMPLENR, 30},
{970*OVERSAMPLENR, 29},
{972*OVERSAMPLENR, 28},
{974*OVERSAMPLENR, 27},
{976*OVERSAMPLENR, 26},
{978*OVERSAMPLENR, 25},
{980*OVERSAMPLENR, 24},
{982*OVERSAMPLENR, 23},
{984*OVERSAMPLENR, 22},
{985*OVERSAMPLENR, 21},
{987*OVERSAMPLENR, 20},
{995*OVERSAMPLENR, 15},
{1001*OVERSAMPLENR, 10},
{1006*OVERSAMPLENR, 5},
{1010*OVERSAMPLENR, 0},
};
#endif
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8)
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
const short temptable_8[][2] PROGMEM = {
{1*OVERSAMPLENR, 704},
{54*OVERSAMPLENR, 216},
{107*OVERSAMPLENR, 175},
{160*OVERSAMPLENR, 152},
{213*OVERSAMPLENR, 137},
{266*OVERSAMPLENR, 125},
{319*OVERSAMPLENR, 115},
{372*OVERSAMPLENR, 106},
{425*OVERSAMPLENR, 99},
{478*OVERSAMPLENR, 91},
{531*OVERSAMPLENR, 85},
{584*OVERSAMPLENR, 78},
{637*OVERSAMPLENR, 71},
{690*OVERSAMPLENR, 65},
{743*OVERSAMPLENR, 58},
{796*OVERSAMPLENR, 50},
{849*OVERSAMPLENR, 42},
{902*OVERSAMPLENR, 31},
{955*OVERSAMPLENR, 17},
{1008*OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORBED == 9)
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
const short temptable_9[][2] PROGMEM = {
{1*OVERSAMPLENR, 936},
{36*OVERSAMPLENR, 300},
{71*OVERSAMPLENR, 246},
{106*OVERSAMPLENR, 218},
{141*OVERSAMPLENR, 199},
{176*OVERSAMPLENR, 185},
{211*OVERSAMPLENR, 173},
{246*OVERSAMPLENR, 163},
{281*OVERSAMPLENR, 155},
{316*OVERSAMPLENR, 147},
{351*OVERSAMPLENR, 140},
{386*OVERSAMPLENR, 134},
{421*OVERSAMPLENR, 128},
{456*OVERSAMPLENR, 122},
{491*OVERSAMPLENR, 117},
{526*OVERSAMPLENR, 112},
{561*OVERSAMPLENR, 107},
{596*OVERSAMPLENR, 102},
{631*OVERSAMPLENR, 97},
{666*OVERSAMPLENR, 92},
{701*OVERSAMPLENR, 87},
{736*OVERSAMPLENR, 81},
{771*OVERSAMPLENR, 76},
{806*OVERSAMPLENR, 70},
{841*OVERSAMPLENR, 63},
{876*OVERSAMPLENR, 56},
{911*OVERSAMPLENR, 48},
{946*OVERSAMPLENR, 38},
{981*OVERSAMPLENR, 23},
{1005*OVERSAMPLENR, 5},
{1016*OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORBED == 10)
// 100k RS thermistor 198-961 (4.7k pullup)
const short temptable_10[][2] PROGMEM = {
{1*OVERSAMPLENR, 929},
{36*OVERSAMPLENR, 299},
{71*OVERSAMPLENR, 246},
{106*OVERSAMPLENR, 217},
{141*OVERSAMPLENR, 198},
{176*OVERSAMPLENR, 184},
{211*OVERSAMPLENR, 173},
{246*OVERSAMPLENR, 163},
{281*OVERSAMPLENR, 154},
{316*OVERSAMPLENR, 147},
{351*OVERSAMPLENR, 140},
{386*OVERSAMPLENR, 134},
{421*OVERSAMPLENR, 128},
{456*OVERSAMPLENR, 122},
{491*OVERSAMPLENR, 117},
{526*OVERSAMPLENR, 112},
{561*OVERSAMPLENR, 107},
{596*OVERSAMPLENR, 102},
{631*OVERSAMPLENR, 97},
{666*OVERSAMPLENR, 91},
{701*OVERSAMPLENR, 86},
{736*OVERSAMPLENR, 81},
{771*OVERSAMPLENR, 76},
{806*OVERSAMPLENR, 70},
{841*OVERSAMPLENR, 63},
{876*OVERSAMPLENR, 56},
{911*OVERSAMPLENR, 48},
{946*OVERSAMPLENR, 38},
{981*OVERSAMPLENR, 23},
{1005*OVERSAMPLENR, 5},
{1016*OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORBED == 11)
// QU-BD silicone bed QWG-104F-3950 thermistor
const short temptable_11[][2] PROGMEM = {
{1*OVERSAMPLENR, 938},
{31*OVERSAMPLENR, 314},
{41*OVERSAMPLENR, 290},
{51*OVERSAMPLENR, 272},
{61*OVERSAMPLENR, 258},
{71*OVERSAMPLENR, 247},
{81*OVERSAMPLENR, 237},
{91*OVERSAMPLENR, 229},
{101*OVERSAMPLENR, 221},
{111*OVERSAMPLENR, 215},
{121*OVERSAMPLENR, 209},
{131*OVERSAMPLENR, 204},
{141*OVERSAMPLENR, 199},
{151*OVERSAMPLENR, 195},
{161*OVERSAMPLENR, 190},
{171*OVERSAMPLENR, 187},
{181*OVERSAMPLENR, 183},
{191*OVERSAMPLENR, 179},
{201*OVERSAMPLENR, 176},
{221*OVERSAMPLENR, 170},
{241*OVERSAMPLENR, 165},
{261*OVERSAMPLENR, 160},
{281*OVERSAMPLENR, 155},
{301*OVERSAMPLENR, 150},
{331*OVERSAMPLENR, 144},
{361*OVERSAMPLENR, 139},
{391*OVERSAMPLENR, 133},
{421*OVERSAMPLENR, 128},
{451*OVERSAMPLENR, 123},
{491*OVERSAMPLENR, 117},
{531*OVERSAMPLENR, 111},
{571*OVERSAMPLENR, 105},
{611*OVERSAMPLENR, 100},
{641*OVERSAMPLENR, 95},
{681*OVERSAMPLENR, 90},
{711*OVERSAMPLENR, 85},
{751*OVERSAMPLENR, 79},
{791*OVERSAMPLENR, 72},
{811*OVERSAMPLENR, 69},
{831*OVERSAMPLENR, 65},
{871*OVERSAMPLENR, 57},
{881*OVERSAMPLENR, 55},
{901*OVERSAMPLENR, 51},
{921*OVERSAMPLENR, 45},
{941*OVERSAMPLENR, 39},
{971*OVERSAMPLENR, 28},
{981*OVERSAMPLENR, 23},
{991*OVERSAMPLENR, 17},
{1001*OVERSAMPLENR, 9},
{1021*OVERSAMPLENR, -27}
};
#endif
#if (THERMISTORHEATER_0 == 20) || (THERMISTORHEATER_1 == 20) || (THERMISTORHEATER_2 == 20) || (THERMISTORBED == 20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
/* The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
This does not match the normal thermistor behaviour so we need to set the following defines */
#if (THERMISTORHEATER_0 == 20)
# define HEATER_0_RAW_HI_TEMP 16383
# define HEATER_0_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_1 == 20)
# define HEATER_1_RAW_HI_TEMP 16383
# define HEATER_1_RAW_LO_TEMP 0
#endif
#if (THERMISTORHEATER_2 == 20)
# define HEATER_2_RAW_HI_TEMP 16383
# define HEATER_2_RAW_LO_TEMP 0
#endif
#if (THERMISTORBED == 20)
# define HEATER_BED_RAW_HI_TEMP 16383
# define HEATER_BED_RAW_LO_TEMP 0
#endif
const short temptable_20[][2] PROGMEM = {
{ 0*OVERSAMPLENR , 0 },
{ 227*OVERSAMPLENR , 1 },
{ 236*OVERSAMPLENR , 10 },
{ 245*OVERSAMPLENR , 20 },
{ 253*OVERSAMPLENR , 30 },
{ 262*OVERSAMPLENR , 40 },
{ 270*OVERSAMPLENR , 50 },
{ 279*OVERSAMPLENR , 60 },
{ 287*OVERSAMPLENR , 70 },
{ 295*OVERSAMPLENR , 80 },
{ 304*OVERSAMPLENR , 90 },
{ 312*OVERSAMPLENR , 100 },
{ 320*OVERSAMPLENR , 110 },
{ 329*OVERSAMPLENR , 120 },
{ 337*OVERSAMPLENR , 130 },
{ 345*OVERSAMPLENR , 140 },
{ 353*OVERSAMPLENR , 150 },
{ 361*OVERSAMPLENR , 160 },
{ 369*OVERSAMPLENR , 170 },
{ 377*OVERSAMPLENR , 180 },
{ 385*OVERSAMPLENR , 190 },
{ 393*OVERSAMPLENR , 200 },
{ 401*OVERSAMPLENR , 210 },
{ 409*OVERSAMPLENR , 220 },
{ 417*OVERSAMPLENR , 230 },
{ 424*OVERSAMPLENR , 240 },
{ 432*OVERSAMPLENR , 250 },
{ 440*OVERSAMPLENR , 260 },
{ 447*OVERSAMPLENR , 270 },
{ 455*OVERSAMPLENR , 280 },
{ 463*OVERSAMPLENR , 290 },
{ 470*OVERSAMPLENR , 300 },
{ 478*OVERSAMPLENR , 310 },
{ 485*OVERSAMPLENR , 320 },
{ 493*OVERSAMPLENR , 330 },
{ 500*OVERSAMPLENR , 340 },
{ 507*OVERSAMPLENR , 350 },
{ 515*OVERSAMPLENR , 360 },
{ 522*OVERSAMPLENR , 370 },
{ 529*OVERSAMPLENR , 380 },
{ 537*OVERSAMPLENR , 390 },
{ 544*OVERSAMPLENR , 400 },
{ 614*OVERSAMPLENR , 500 },
{ 681*OVERSAMPLENR , 600 },
{ 744*OVERSAMPLENR , 700 },
{ 805*OVERSAMPLENR , 800 },
{ 862*OVERSAMPLENR , 900 },
{ 917*OVERSAMPLENR , 1000 },
{ 968*OVERSAMPLENR , 1100 }
};
#endif
#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51)
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee.
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: Twice the resolution and better linearity from 150C to 200C
const short temptable_51[][2] PROGMEM = {
{1*OVERSAMPLENR, 350},
{190*OVERSAMPLENR, 250}, //top rating 250C
{203*OVERSAMPLENR, 245},
{217*OVERSAMPLENR, 240},
{232*OVERSAMPLENR, 235},
{248*OVERSAMPLENR, 230},
{265*OVERSAMPLENR, 225},
{283*OVERSAMPLENR, 220},
{302*OVERSAMPLENR, 215},
{322*OVERSAMPLENR, 210},
{344*OVERSAMPLENR, 205},
{366*OVERSAMPLENR, 200},
{390*OVERSAMPLENR, 195},
{415*OVERSAMPLENR, 190},
{440*OVERSAMPLENR, 185},
{467*OVERSAMPLENR, 180},
{494*OVERSAMPLENR, 175},
{522*OVERSAMPLENR, 170},
{551*OVERSAMPLENR, 165},
{580*OVERSAMPLENR, 160},
{609*OVERSAMPLENR, 155},
{638*OVERSAMPLENR, 150},
{666*OVERSAMPLENR, 145},
{695*OVERSAMPLENR, 140},
{722*OVERSAMPLENR, 135},
{749*OVERSAMPLENR, 130},
{775*OVERSAMPLENR, 125},
{800*OVERSAMPLENR, 120},
{823*OVERSAMPLENR, 115},
{845*OVERSAMPLENR, 110},
{865*OVERSAMPLENR, 105},
{884*OVERSAMPLENR, 100},
{901*OVERSAMPLENR, 95},
{917*OVERSAMPLENR, 90},
{932*OVERSAMPLENR, 85},
{944*OVERSAMPLENR, 80},
{956*OVERSAMPLENR, 75},
{966*OVERSAMPLENR, 70},
{975*OVERSAMPLENR, 65},
{982*OVERSAMPLENR, 60},
{989*OVERSAMPLENR, 55},
{995*OVERSAMPLENR, 50},
{1000*OVERSAMPLENR, 45},
{1004*OVERSAMPLENR, 40},
{1007*OVERSAMPLENR, 35},
{1010*OVERSAMPLENR, 30},
{1013*OVERSAMPLENR, 25},
{1015*OVERSAMPLENR, 20},
{1017*OVERSAMPLENR, 15},
{1018*OVERSAMPLENR, 10},
{1019*OVERSAMPLENR, 5},
{1020*OVERSAMPLENR, 0},
{1021*OVERSAMPLENR, -5}
};
#endif
#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORBED == 52)
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_52[][2] PROGMEM = {
{1*OVERSAMPLENR, 500},
{125*OVERSAMPLENR, 300}, //top rating 300C
{142*OVERSAMPLENR, 290},
{162*OVERSAMPLENR, 280},
{185*OVERSAMPLENR, 270},
{211*OVERSAMPLENR, 260},
{240*OVERSAMPLENR, 250},
{274*OVERSAMPLENR, 240},
{312*OVERSAMPLENR, 230},
{355*OVERSAMPLENR, 220},
{401*OVERSAMPLENR, 210},
{452*OVERSAMPLENR, 200},
{506*OVERSAMPLENR, 190},
{563*OVERSAMPLENR, 180},
{620*OVERSAMPLENR, 170},
{677*OVERSAMPLENR, 160},
{732*OVERSAMPLENR, 150},
{783*OVERSAMPLENR, 140},
{830*OVERSAMPLENR, 130},
{871*OVERSAMPLENR, 120},
{906*OVERSAMPLENR, 110},
{935*OVERSAMPLENR, 100},
{958*OVERSAMPLENR, 90},
{976*OVERSAMPLENR, 80},
{990*OVERSAMPLENR, 70},
{1000*OVERSAMPLENR, 60},
{1008*OVERSAMPLENR, 50},
{1013*OVERSAMPLENR, 40},
{1017*OVERSAMPLENR, 30},
{1019*OVERSAMPLENR, 20},
{1021*OVERSAMPLENR, 10},
{1022*OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORBED == 55)
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
// Advantage: More resolution and better linearity from 150C to 200C
const short temptable_55[][2] PROGMEM = {
{1*OVERSAMPLENR, 500},
{76*OVERSAMPLENR, 300},
{87*OVERSAMPLENR, 290},
{100*OVERSAMPLENR, 280},
{114*OVERSAMPLENR, 270},
{131*OVERSAMPLENR, 260},
{152*OVERSAMPLENR, 250},
{175*OVERSAMPLENR, 240},
{202*OVERSAMPLENR, 230},
{234*OVERSAMPLENR, 220},
{271*OVERSAMPLENR, 210},
{312*OVERSAMPLENR, 200},
{359*OVERSAMPLENR, 190},
{411*OVERSAMPLENR, 180},
{467*OVERSAMPLENR, 170},
{527*OVERSAMPLENR, 160},
{590*OVERSAMPLENR, 150},
{652*OVERSAMPLENR, 140},
{713*OVERSAMPLENR, 130},
{770*OVERSAMPLENR, 120},
{822*OVERSAMPLENR, 110},
{867*OVERSAMPLENR, 100},
{905*OVERSAMPLENR, 90},
{936*OVERSAMPLENR, 80},
{961*OVERSAMPLENR, 70},
{979*OVERSAMPLENR, 60},
{993*OVERSAMPLENR, 50},
{1003*OVERSAMPLENR, 40},
{1010*OVERSAMPLENR, 30},
{1015*OVERSAMPLENR, 20},
{1018*OVERSAMPLENR, 10},
{1020*OVERSAMPLENR, 0}
};
#endif
#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermister
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
// r0: 100000
// t0: 25
// r1: 0 (parallel with rTherm)
// r2: 4700 (series with rTherm)
// beta: 3950
// min adc: 1 at 0.0048828125 V
// max adc: 1023 at 4.9951171875 V
const short temptable_60[][2] PROGMEM = {
{51*OVERSAMPLENR, 272},
{61*OVERSAMPLENR, 258},
{71*OVERSAMPLENR, 247},
{81*OVERSAMPLENR, 237},
{91*OVERSAMPLENR, 229},
{101*OVERSAMPLENR, 221},
{131*OVERSAMPLENR, 204},
{161*OVERSAMPLENR, 190},
{191*OVERSAMPLENR, 179},
{231*OVERSAMPLENR, 167},
{271*OVERSAMPLENR, 157},
{311*OVERSAMPLENR, 148},
{351*OVERSAMPLENR, 140},
{381*OVERSAMPLENR, 135},
{411*OVERSAMPLENR, 130},
{441*OVERSAMPLENR, 125},
{451*OVERSAMPLENR, 123},
{461*OVERSAMPLENR, 122},
{471*OVERSAMPLENR, 120},
{481*OVERSAMPLENR, 119},
{491*OVERSAMPLENR, 117},
{501*OVERSAMPLENR, 116},
{511*OVERSAMPLENR, 114},
{521*OVERSAMPLENR, 113},
{531*OVERSAMPLENR, 111},
{541*OVERSAMPLENR, 110},
{551*OVERSAMPLENR, 108},
{561*OVERSAMPLENR, 107},
{571*OVERSAMPLENR, 105},
{581*OVERSAMPLENR, 104},
{591*OVERSAMPLENR, 102},
{601*OVERSAMPLENR, 101},
{611*OVERSAMPLENR, 100},
{621*OVERSAMPLENR, 98},
{631*OVERSAMPLENR, 97},
{641*OVERSAMPLENR, 95},
{651*OVERSAMPLENR, 94},
{661*OVERSAMPLENR, 92},
{671*OVERSAMPLENR, 91},
{681*OVERSAMPLENR, 90},
{691*OVERSAMPLENR, 88},
{701*OVERSAMPLENR, 87},
{711*OVERSAMPLENR, 85},
{721*OVERSAMPLENR, 84},
{731*OVERSAMPLENR, 82},
{741*OVERSAMPLENR, 81},
{751*OVERSAMPLENR, 79},
{761*OVERSAMPLENR, 77},
{771*OVERSAMPLENR, 76},
{781*OVERSAMPLENR, 74},
{791*OVERSAMPLENR, 72},
{801*OVERSAMPLENR, 71},
{811*OVERSAMPLENR, 69},
{821*OVERSAMPLENR, 67},
{831*OVERSAMPLENR, 65},
{841*OVERSAMPLENR, 63},
{851*OVERSAMPLENR, 62},
{861*OVERSAMPLENR, 60},
{871*OVERSAMPLENR, 57},
{881*OVERSAMPLENR, 55},
{891*OVERSAMPLENR, 53},
{901*OVERSAMPLENR, 51},
{911*OVERSAMPLENR, 48},
{921*OVERSAMPLENR, 45},
{931*OVERSAMPLENR, 42},
{941*OVERSAMPLENR, 39},
{951*OVERSAMPLENR, 36},
{961*OVERSAMPLENR, 32},
{981*OVERSAMPLENR, 23},
{991*OVERSAMPLENR, 17},
{1001*OVERSAMPLENR, 9},
{1008*OVERSAMPLENR, 0},
};
#endif
// Pt1000 and Pt100 handling
//
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
const short temptable_110[][2] PROGMEM = {
// only few values are needed as the curve is very flat
PtLine(0,100,1000)
PtLine(50,100,1000)
PtLine(100,100,1000)
PtLine(150,100,1000)
PtLine(200,100,1000)
PtLine(250,100,1000)
PtLine(300,100,1000)
};
#endif
#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
const short temptable_147[][2] PROGMEM = {
// only few values are needed as the curve is very flat
PtLine(0,100,4700)
PtLine(50,100,4700)
PtLine(100,100,4700)
PtLine(150,100,4700)
PtLine(200,100,4700)
PtLine(250,100,4700)
PtLine(300,100,4700)
};
#endif
#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
const short temptable_1010[][2] PROGMEM = {
PtLine(0,1000,1000)
PtLine(25,1000,1000)
PtLine(50,1000,1000)
PtLine(75,1000,1000)
PtLine(100,1000,1000)
PtLine(125,1000,1000)
PtLine(150,1000,1000)
PtLine(175,1000,1000)
PtLine(200,1000,1000)
PtLine(225,1000,1000)
PtLine(250,1000,1000)
PtLine(275,1000,1000)
PtLine(300,1000,1000)
};
#endif
#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
const short temptable_1047[][2] PROGMEM = {
// only few values are needed as the curve is very flat
PtLine(0,1000,4700)
PtLine(50,1000,4700)
PtLine(100,1000,4700)
PtLine(150,1000,4700)
PtLine(200,1000,4700)
PtLine(250,1000,4700)
PtLine(300,1000,4700)
};
#endif
#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)
#ifdef THERMISTORHEATER_0
# define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
# define HEATER_0_TEMPTABLE_LEN (sizeof(HEATER_0_TEMPTABLE)/sizeof(*HEATER_0_TEMPTABLE))
#else
# ifdef HEATER_0_USES_THERMISTOR
# error No heater 0 thermistor table specified
# else // HEATER_0_USES_THERMISTOR
# define HEATER_0_TEMPTABLE NULL
# define HEATER_0_TEMPTABLE_LEN 0
# endif // HEATER_0_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_0_RAW_HI_TEMP
# ifdef HEATER_0_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
# define HEATER_0_RAW_HI_TEMP 0
# define HEATER_0_RAW_LO_TEMP 16383
# else //In case of an thermocouple the highest temperature results in the highest ADC value
# define HEATER_0_RAW_HI_TEMP 16383
# define HEATER_0_RAW_LO_TEMP 0
# endif
#endif
#ifdef THERMISTORHEATER_1
# define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
# define HEATER_1_TEMPTABLE_LEN (sizeof(HEATER_1_TEMPTABLE)/sizeof(*HEATER_1_TEMPTABLE))
#else
# ifdef HEATER_1_USES_THERMISTOR
# error No heater 1 thermistor table specified
# else // HEATER_1_USES_THERMISTOR
# define HEATER_1_TEMPTABLE NULL
# define HEATER_1_TEMPTABLE_LEN 0
# endif // HEATER_1_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_1_RAW_HI_TEMP
# ifdef HEATER_1_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
# define HEATER_1_RAW_HI_TEMP 0
# define HEATER_1_RAW_LO_TEMP 16383
# else //In case of an thermocouple the highest temperature results in the highest ADC value
# define HEATER_1_RAW_HI_TEMP 16383
# define HEATER_1_RAW_LO_TEMP 0
# endif
#endif
#ifdef THERMISTORHEATER_2
# define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
# define HEATER_2_TEMPTABLE_LEN (sizeof(HEATER_2_TEMPTABLE)/sizeof(*HEATER_2_TEMPTABLE))
#else
# ifdef HEATER_2_USES_THERMISTOR
# error No heater 2 thermistor table specified
# else // HEATER_2_USES_THERMISTOR
# define HEATER_2_TEMPTABLE NULL
# define HEATER_2_TEMPTABLE_LEN 0
# endif // HEATER_2_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_2_RAW_HI_TEMP
# ifdef HEATER_2_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
# define HEATER_2_RAW_HI_TEMP 0
# define HEATER_2_RAW_LO_TEMP 16383
# else //In case of an thermocouple the highest temperature results in the highest ADC value
# define HEATER_2_RAW_HI_TEMP 16383
# define HEATER_2_RAW_LO_TEMP 0
# endif
#endif
#ifdef THERMISTORBED
# define BEDTEMPTABLE TT_NAME(THERMISTORBED)
# define BEDTEMPTABLE_LEN (sizeof(BEDTEMPTABLE)/sizeof(*BEDTEMPTABLE))
#else
# ifdef BED_USES_THERMISTOR
# error No bed thermistor table specified
# endif // BED_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_BED_RAW_HI_TEMP
# ifdef BED_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
# define HEATER_BED_RAW_HI_TEMP 0
# define HEATER_BED_RAW_LO_TEMP 16383
# else //In case of an thermocouple the highest temperature results in the highest ADC value
# define HEATER_BED_RAW_HI_TEMP 16383
# define HEATER_BED_RAW_LO_TEMP 0
# endif
#endif
#endif //THERMISTORTABLES_H_