Firmware2/Marlin/src/pins/ramps/pins_MKS_BASE_common.h
2020-07-22 22:20:14 -05:00

76 lines
2.8 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MKS BASE Arduino Mega2560 with RAMPS pin assignments
*/
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "MKS BASE"
#endif
#if MKS_BASE_VERSION >= 14
//
// Heaters / Fans
//
// Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7
//
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER
#define SPINDLE_LASER_PWM_PIN 2 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 15 // Pullup!
#define SPINDLE_DIR_PIN 19
#endif
#ifndef CASE_LIGHT_PIN
#define CASE_LIGHT_PIN 2
#endif
#endif
//
// Microstepping pins
//
#if MKS_BASE_VERSION >= 14 // |===== 1.4 =====|===== 1.5+ =====|
#define X_MS1_PIN 5 // PE3 | Pin 5 | PWM5 | | D3 | SERVO2_PIN
#define X_MS2_PIN 6 // PH3 | Pin 15 | PWM6 | Pin 14 | D6 | SERVO1_PIN
#define Y_MS1_PIN 59 // PF5 | Pin 92 | A5 | | |
#define Y_MS2_PIN 58 // PF4 | Pin 93 | A4 | | |
#define Z_MS1_PIN 22 // PA0 | Pin 78 | D22 | | |
#define Z_MS2_PIN 39 // PG2 | Pin 70 | D39 | | |
#if MKS_BASE_VERSION == 14
#define E0_MS1_PIN 64 // PK2 | Pin 87 | A10 | | |
#define E0_MS2_PIN 63 // PK1 | Pin 88 | A9 | | |
#else
#define E0_MS1_PIN 63 // PK1 | | | Pin 86 | A9 |
#define E0_MS2_PIN 64 // PK2 | | | Pin 87 | A10 |
#endif
#define E1_MS1_PIN 57 // PF3 | Pin 94 | A3 | Pin 93 | A3 |
#define E1_MS2_PIN 4 // PG5 | Pin 1 | PWM4 | | D4 | SERVO3_PIN
#endif
#include "pins_RAMPS.h"