Firmware2/Marlin/language_nl.h
2016-12-13 11:54:35 -05:00

262 lines
15 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Dutch
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_NL_H
#define LANGUAGE_NL_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME _UxGT(" gereed.")
#define MSG_SD_INSERTED _UxGT("Kaart ingestoken")
#define MSG_SD_REMOVED _UxGT("Kaart verwijderd")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Hoofdmenu")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Motoren uit")
#define MSG_AUTO_HOME _UxGT("Auto home")
#define MSG_AUTO_HOME_X _UxGT("Home X")
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats")
#define MSG_LEVEL_BED_DONE _UxGT("Bed level kompl.")
#define MSG_LEVEL_BED_CANCEL _UxGT("Bed level afbr.")
#define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.")
#define MSG_SET_ORIGIN _UxGT("Nulpunt instellen")
#define MSG_PREHEAT_1 _UxGT("PLA voorverwarmen")
#define MSG_PREHEAT_1_N _UxGT("PLA voorverw. ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed")
#define MSG_PREHEAT_1_SETTINGS _UxGT("PLA verw. conf")
#define MSG_PREHEAT_2 _UxGT("ABS voorverwarmen")
#define MSG_PREHEAT_2_N _UxGT("ABS voorverw. ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed")
#define MSG_PREHEAT_2_SETTINGS _UxGT("ABS verw. conf")
#define MSG_COOLDOWN _UxGT("Afkoelen")
#define MSG_SWITCH_PS_ON _UxGT("Stroom aan")
#define MSG_SWITCH_PS_OFF _UxGT("Stroom uit")
#define MSG_EXTRUDE _UxGT("Extrude")
#define MSG_RETRACT _UxGT("Retract")
#define MSG_MOVE_AXIS _UxGT("As verplaatsen")
#define MSG_LEVEL_BED _UxGT("Level bed")
#define MSG_MOVE_X _UxGT("Verplaats X")
#define MSG_MOVE_Y _UxGT("Verplaats Y")
#define MSG_MOVE_Z _UxGT("Verplaats Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_01MM _UxGT("Verplaats 0.1mm")
#define MSG_MOVE_1MM _UxGT("Verplaats 1mm")
#define MSG_MOVE_10MM _UxGT("Verplaats 10mm")
#define MSG_SPEED _UxGT("Snelheid")
#define MSG_BED_Z _UxGT("Bed Z")
#define MSG_NOZZLE _UxGT("Nozzle")
#define MSG_BED _UxGT("Bed")
#define MSG_FAN_SPEED _UxGT("Fan snelheid")
#define MSG_FLOW _UxGT("Flow")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("Aan ")
#define MSG_OFF _UxGT("Uit")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Selecteer")
#define MSG_ACC _UxGT("Versn")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_XSTEPS _UxGT("Xsteps/mm")
#define MSG_YSTEPS _UxGT("Ysteps/mm")
#define MSG_ZSTEPS _UxGT("Zsteps/mm")
#define MSG_ESTEPS _UxGT("Esteps/mm")
#define MSG_E1STEPS _UxGT("E1steps/mm")
#define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperatuur")
#define MSG_MOTION _UxGT("Beweging")
#define MSG_VOLUMETRIC _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("LCD contrast")
#define MSG_STORE_EPROM _UxGT("Geheugen opslaan")
#define MSG_LOAD_EPROM _UxGT("Geheugen laden")
#define MSG_RESTORE_FAILSAFE _UxGT("Noodstop reset")
#define MSG_REFRESH _UxGT("Ververs")
#define MSG_WATCH _UxGT("Info scherm")
#define MSG_PREPARE _UxGT("Voorbereiden")
#define MSG_TUNE _UxGT("Afstellen")
#define MSG_PAUSE_PRINT _UxGT("Print pauzeren")
#define MSG_RESUME_PRINT _UxGT("Print hervatten")
#define MSG_STOP_PRINT _UxGT("Print stoppen")
#define MSG_CARD_MENU _UxGT("Print van SD")
#define MSG_NO_CARD _UxGT("Geen SD kaart")
#define MSG_DWELL _UxGT("Slapen...")
#define MSG_USERWAIT _UxGT("Wachten...")
#define MSG_RESUMING _UxGT("Print hervatten")
#define MSG_PRINT_ABORTED _UxGT("Print afgebroken")
#define MSG_NO_MOVE _UxGT("Geen beweging.")
#define MSG_KILLED _UxGT("Afgebroken. ")
#define MSG_STOPPED _UxGT("Gestopt. ")
#define MSG_CONTROL_RETRACT _UxGT("Retract mm") //accepted English term in Dutch
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ruil Retract mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retract F")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet +mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ruil UnRet +mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet F")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Verv. Filament")
#define MSG_INIT_SDCARD _UxGT("Init. SD kaart")
#define MSG_CNG_SDCARD _UxGT("Verv. SD Kaart")
#define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("Eerst")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") //accepted English term in Dutch
#define MSG_BABYSTEP_X _UxGT("Babystap X")
#define MSG_BABYSTEP_Y _UxGT("Babystap Y")
#define MSG_BABYSTEP_Z _UxGT("Babystap Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop afbr.")
#define MSG_HEATING_FAILED_LCD _UxGT("Voorverw. fout")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Redun. temp fout")
#define MSG_THERMAL_RUNAWAY _UxGT("Therm. wegloop")
#define MSG_ERR_MAXTEMP _UxGT("Err: Max. temp")
#define MSG_ERR_MINTEMP _UxGT("Err: Min. temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Max.tmp bed")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: Min.tmp bed")
#define MSG_ERR_Z_HOMING _UxGT("Fout Z homing")
#define MSG_HALTED _UxGT("PRINTER GESTOPT")
#define MSG_PLEASE_RESET _UxGT("Reset A.U.B.")
#define MSG_SHORT_DAY _UxGT("d") // One character only. Keep English standard
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Voorwarmen...")
#define MSG_HEATING_COMPLETE _UxGT("Voorverw. kompl.")
#define MSG_BED_HEATING _UxGT("Bed voorverw.")
#define MSG_BED_DONE _UxGT("Bed is voorverw.")
#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibratie")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibreer X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibreer Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibreer Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibreer Midden")
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info") //accepted English term in Dutch
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_MENU _UxGT("Over Printer")
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#define MSG_LIGHTS_ON _UxGT("Case licht aan")
#define MSG_LIGHTS_OFF _UxGT("Case licht uit")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid")
#define MSG_INFO_PRINT_TIME _UxGT("Totale Printtijd")
#define MSG_INFO_PRINT_LONGEST _UxGT("Langste Printtijd")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Totaal Extrudeert")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Aantal")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Voltooid")
#define MSG_INFO_PRINT_TIME _UxGT("Printtijd ")
#define MSG_INFO_PRINT_LONGEST _UxGT("Langste")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Power Supply") //accepted English term in Dutch
#define MSG_DRIVE_STRENGTH _UxGT("Motorstroom")
#define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("WISSEL FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("WISSEL OPTIES:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeer meer")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print")
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#if LCD_HEIGHT >= 4
// Up to 3 lines
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor start")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament te")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("verwisselen")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament uit")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("te laden")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("om verder...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament te")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("extruderen")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan")
#else // LCD_HEIGHT < 4
// Up to 2 lines
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("start...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("uitladen...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrudering")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_NL_H